PCE-AC 2000 CO2 Analyser User Manual

: June 15, 2024
: PCE

Table of Contents

PCE-AC 2000 CO2 Analyser
Product Information
Safety notes
Device description
Techncal specifications
Operation
Contact
Disposal
PCE Instruments contact information
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

PCE-AC 2000 CO2 Analyser

Product Information

Technical Specifications

CO2 Measurement Range: 0 – 9999 ppm
CO2 Accuracy: 1 ppm
CO2 Resolution: 1 ppm
Temperature Measurement Range: –
Temperature Resolution: –
Temperature Accuracy: –
Relative Humidity Measurement Range: 0 – 99.9% RH
Relative Humidity Resolution: 0.1% RH
Relative Humidity Accuracy: –
Traffic Light Function:
- Green: 0 – 599 ppm CO2
- Yellow: 600 – 1199 ppm CO2
- Red: 1200 – 9999 ppm CO2
Alarm: Adjustable, audible
Repeatability: –

Device Description

Front Side / CO2 Traffic Light
The front side of the PCE-AC 2000 CO2 Analyser features a CO2 traffic light system that provides visual indications based on the CO2 levels detected:

CO2 Good / Green: 0 – 599 ppm CO2
CO2 OK / Yellow: 600 – 1199 ppm CO2
CO2 Poor / Red: 1200 – 9999 ppm CO2

Rear Side
The rear side of the device contains additional components and connections. Detailed information about the rear side can be found in the user manual.

Operation

Power On CO2 Analyser
To power on the PCE-AC 2000 CO2 Analyser, follow these steps:

Ensure the device is connected to a power source or has a charged battery.
Press the power button located on the device.
The device will start up and display the current CO2 level.

Switch Unit
The PCE-AC 2000 CO2 Analyser features a switch unit for adjusting various settings. Detailed instructions on how to use the switch unit can be found in the user manual.

Set Alarm
You can set an alarm on the PCE-AC 2000 CO2 Analyser to notify you when the CO2 levels reach a certain threshold. To set the alarm, follow these steps:

Access the alarm settings menu using the switch unit or buttons on the device.
Select the desired CO2 threshold for the alarm.
Confirm the alarm settings.
When the CO2 levels exceed the set threshold, an audible alarm will be triggered.

Contact
If you have any questions or need assistance with the PCE-AC 2000 CO2 Analyser, please contact PCE Instruments using the following contact details:

Phone: [Phone Number] Email: [Email Address]

Disposal
For information on how to dispose of the PCE-AC 2000 CO2 Analyser, please refer to the user manual or contact PCE Instruments for guidance.

FAQ

Q: Can the PCE-AC 2000 CO2 Analyser be used by non-qualified personnel?
A: No, the device may only be used by qualified personnel.
Q: What is the warranty coverage for the PCE-AC 2000 CO2 Analyser?
A: Damage or injuries caused by non-observance of the manual are excluded from the warranty coverage.
Q: Where can I find the general guarantee terms?
A: The general guarantee terms can be found in PCE Instruments’ general terms of business.

User manuals in various languages: (français, italiano, español, português, nederlands, türk, polski, русский, 中文) can be found by using our product search on: www.pce-instruments.com

Safety notes

Please read this manual carefully and completely before you use the device for the first time. The device may only be used by qualified personnel and repaired by PCE Instruments personnel. Damage or injuries caused by non- observance of the manual are excluded from our liability and not covered by our warranty.

The device must only be used as described in this instruction manual. If used otherwise, this can cause dangerous situations for the user and damage to the meter.
The instrument may only be used if the environmental conditions (temperature, relative humidity, …) are within the ranges stated in the technical specifications. Do not expose the device to extreme temperatures, direct sunlight, extreme humidity or moisture.
Do not expose the device to shocks or strong vibrations.
The case should only be opened by qualified PCE Instruments personnel.
Never use the instrument when your hands are wet.
You must not make any technical changes to the device.
The appliance should only be cleaned with a damp cloth. Use only pH-neutral cleaner, no abrasives or solvents.
The device must only be used with accessories from PCE Instruments or equivalent.
Before each use, inspect the case for visible damage. If any damage is visible, do not use the device.
Do not use the instrument in explosive atmospheres.
The measurement range as stated in the specifications must not be exceeded under any circumstances.
Non-observance of the safety notes can cause damage to the device and injuries to the user.

We do not assume liability for printing errors or any other mistakes in this manual. We expressly point to our general guarantee terms which can be found in our general terms of business. If you have any questions please contact PCE Instruments. The contact details can be found at the end of this manual.

Device description

Front side / CO2 traffic light

CO2 good / green: 0 … 599 ppm
CO2 OK / yellow: 600 … 1199 ppm
CO2 poor / red: 1200 … 9999 ppm

Rear side

Mode key
Up key
Down key
Alarm key
°C / °F key
Socket for power supply

Techncal specifications

CO 2

Traffic light function

| green: 0 … 599 ppm

yellow: 600 … 1199 ppm

red: 1200 … 9999 ppm

Operation

Power on CO2 analyser
As soon as you connect the mains adaptor to the CO2 analyser via the plug socket, the analyser will power on. The initialisation time is 7 seconds. The meter displays a countdown. After the time has elapsed, the unit is ready for operation.
Switch unit
Press the °C/°F key to switch the unit for the temperature between °C and °F.
Set alarm
Press the mode key to set the alarm. Use the arrow keys to adjust the alarm value up or down. Once the desired value has been set, press the mode key to save the setting.
Note: An alarm value of 1200 ppm is set at the factory.

Contact

If you have any questions, suggestions or technical problems, please do not hesitate to contact us. You will find the relevant contact information at the end of this user manual.

Disposal

For the disposal of batteries in the EU, the 2006/66/EC directive of the European Parliament applies. Due to the contained pollutants, batteries must not be disposed of as household waste. They must be given to collection points designed for that purpose.
In order to comply with the EU directive 2012/19/EU we take our devices back. We either re-use them or give them to a recycling company which disposes of the devices in line with law.
For countries outside the EU, batteries and devices should be disposed of in accordance with your local waste regulations.
If you have any questions, please contact PCE Instruments.

PCE Instruments contact information

Germany
PCE Deutschland GmbH
Im Langel 4
D-59872 Meschede
Deutschland
Tel.: +49 (0) 2903 976 99 0
Fax: +49 (0) 2903 976 99 29
info@pce-instruments.com
www.pce-instruments.com/deutsch

United Kingdom
PCE Instruments UK Ltd
Unit 11 Southpoint Business Park Ensign Way, Southampton Hampshire
United Kingdom, SO31 4RF
Tel: +44 (0) 2380 98703 0
Fax: +44 (0) 2380 98703 9
info@pce-instruments.co.uk
www.pce-instruments.com/english

The Netherlands
PCE Brookhuis B.V.
Institutenweg 15
7521 PH Enschede
Nederland
Telefoon: +31 (0)53 737 01 92
info@pcebenelux.nl
www.pce-instruments.com/dutch

United States of America
PCE Americas Inc.
1201 Jupiter Park Drive, Suite 8 Jupiter / Palm Beach
33458 FL
USA
Tel: +1 561-320-9162
Fax: +1 561-320-9176
info@pce-americas.com
www.pce-instruments.com/us

France
PCE Instruments France EURL
23, rue de Strasbourg
67250 Soultz-Sous-Forets
France
Téléphone: +33 (0) 972 3537 17
Numéro de fax: +33 (0) 972 3537 18
info@pce-france.fr
www.pce-instruments.com/french

Italy
PCE Italia s.r.l.
Via Pesciatina 878 / B-Interno 6
55010 Loc. Gragnano
Capannori (Lucca)
Italia
Telefono: +39 0583 975 114
Fax: +39 0583 974 824
info@pce-italia.it
www.pce-instruments.com/italiano

China
PCE (Beijing) Technology Co., Limited 1519 Room, 6 Building
Zhong Ang Times Plaza
No. 9 Mentougou Road, Tou Gou District 102300 Beijing, China
Tel: +86 (10) 8893 9660
info@pce-instruments.cn
www.pce-instruments.cn

Spain
PCE Ibérica S.L.
Calle Mayor, 53
02500 Tobarra (Albacete) España
Tel.: +34 967 543 548
Fax: +34 967 543 542
info@pce-iberica.es
www.pce-instruments.com/espanol

Turkey
PCE Teknik Cihazları Ltd.Şti. Halkalı Merkez Mah.
Pehlivan Sok. No.6/C
34303 Küçükçekmece – İstanbul Türkiye
Tel: 0212 471 11 47
Faks: 0212 705 53 93
info@pce-cihazlari.com.tr
www.pce-instruments.com/turkish

Hong Kong
PCE Instruments HK Ltd.
Unit J, 21/F., COS Centre
56 Tsun Yip Street
Kwun Tong
Kowloon, Hong Kong
Tel: +852-301-84912
jyi@pce-instruments.com
www.pce-instruments.cn