ALVAR B0B3MWXNX4 Mini Projector User Manual

ALVAR B0B3MWXNX4 Mini Projector

• Thanks for choosing our product.
• If you have any concerns or need any help, please contact us at contact@projectorcs.com

WHAT’S IN THE BOX

NOTICE

PRODUCT OVERVIEW

QUICK START

Projector Installation

Note:

Whichever installation option you select, please make sure:

1. the projector is centered directly in front of the wall/screen, but not tilted or placed at an angle toward the wall/screen;
2. to go to Settings> Projection Setting> Projection Mode to select the corresponding projection mode so the images can be projected correctly.

Power On/Off

1. Plug the power cord into an outlet.
2. Take off the lens cover.
3. Press the Power Button to turn on the projector.
4. Press the Power Button twice to turn off the projector.

Images Adjustment

1. Rotate the Keystone Correction Ring to correct Vertical Keystone Distortion until the image is evenly rectangular.
2. Rotate the Focus Ring to sharpen the Image Focus until the blurred image becomes clear.
3. Go to Homepage> Settings> Projection Setting> Image Scaling to enlarge or reduce the image size (Optional)

PROJECTOR CONNECTION AND INPUT SOURCE

Connect your device to the projector correctly, then select the right input source on the homepage.

USB Connection

HD Connection

This option is for connecting a device with an HDMI output port.

AV Connection

TROUBLESHOOTING GUIDE

1. The copyrighted content from Hulu, Netflix, and similar services can not be mirrored or cast.
   • Due to the copyright restriction from Hulu, Netflix, and similar services, the contents MAY NOT be mirrored or cast.
2. What should I do if I want to watch copyrighted content from Hulu, Netflix, and similar services via the projector?
   • Please prepare a Fire TV stick, Roku stick, or Chromecast™ (not included}, then connect it to the projector to watch the contents.
3. Blurry image
   • Adjust the focus ring/keystone.
   • The projector and screen/wall must be at an effective distance.
4. Can I play a video with 4K resolution via a USB drive?
   • The 4K video content can be presented by connecting the projector to a laptop or a TV stick, but it cannot be presented via a USB drive.
5. Remote unresponsive
   • Make sure the remote points at the IR receiver directly.
   • Do not cover the IR receiver.
   • Replace the old AAA batteries with new ones.
6. Upside down images
   • Go to Homepage> Settings> Projection Setting> Projection Mode to flip the projection image.
7. Factory reset
   • Go to Homepage> Settings> System Setting> Restore Factory Default to restore the projector to default settings.

WIFI CONNECTION

Go to Homepage> Settings> Network Setting to connect the projector to your router’s WiFi.

SCREEN MIRRORING

For iOS System

• Screen Mirroring Wirelessly

Step 1:

• Connect the projector and your mobile device to the same router’s WiFi or directly connect your mobile device to the projector’s AP hotspot.

Tip:

• When you are using the projector’s AP hotspot, the content will be mirrored via the cellular data.

Step 2:

• Go to Homepage and select iOS Cast to enter the interface below.

Step 3:

• Activate Screen Mirroring/AirPlaying Mirroring in the Control Center of your iOS device and search for the projector.

Step 4:

• Select NETLINK-(cast) from the search list. The contents on your iOS device will be mirrored on the projection screen/wall after a successful connection.

Screen Mirroring via A Lightning Cable

Step 1:

• Go to the Homepage and select iOS Cable to enter the interface below.

Step 2:

• Connect your mobile device to the USB Port on the projector using the ORIGINAL lightning cable.

Step 3:

• Select Trust in the pop-up window of Trust This Computer.

Step 4:

• The contents on your iOS device will be mirrored on the projection screen/wall after a successful connection.

For Android System

• To activate this function, please make sure your Android device supports Multi-screen/Smart View/Wireless
• Display. Names may vary on different Android devices.

Step 1:

• Go to the WiFi settings of your Android mobile device to switch on the option of WiFi.

Note:

• A successful WiFi connection is not a must, but please make sure the WiFi switch on your Android device is ON.

Step 2:

• Go to Homepage and select Miracast to enter the interface below.

Step 3:

• Activate the Multi-screen/Smart View/Wireless Display function on your Android device and search for the projector.

Step 4:

• Select NETLINK-(cast) from the search list. The contents on your Android device will be mirrored on the projection screen/wall after a successful connection.

AUDIO OUTPUT VIA BT CONNECTION

• Except for the 3.5mm audio jack on the projector, you can also connect a BT speaker or a pair of headphones to this projector via a BT wireless connection to achieve audio output.

Step 1:

• Turn on your BT device and make it ready for a BT connection.

Step 2:

• Go to Homepage> Settings> System Setting> Bluetooth and press OK to enter the interface below.

Step 3:

• Press the Right button to turn on the BT function of the projector, then select Search device and press OK to start searching for available BT devices.

Step 4:

• Select your BT device and pair it with the projector.

IMPORTANT:

1. Compared with the wired connection to a speaker, a BT wireless connection spends more time processing digital audio data, converting said data to an audio signal, and streaming the signal.
   • There may be a delay or slight lag on audio due to signal interference.
   • As a result, the sound on the speaker may not be in sync with the image on the projector, especially when you are using wireless screen mirroring with WiFi and BT wireless connection at the same time.
   • If you are experiencing this situation, please check the following options to improve audio quality:
   • Instead of using wireless screen mirroring with WiFi and BT wireless connection at the same time, we recommend using wired screen mirroring and BT connection or using HD connection via the provided HD cable and BT connection simultaneously. If you still want to use wireless screen mirroring, it is recommended to output the audio via a wired speaker.
   • Move your BT device closer to the projector.
   • Keep the projector and your BT device away from other BT devices to avoid interference.
   • You may be able to adjust the latency (Lip Sync) on your device which is playing the video. The way to adjust the latency varies with different devices; please consult it from the device manufacturer.
2. You cannot use this projector as a BT speaker or pair your mobile device with this projector because this projector can only send the signal to an external BT device, but cannot receive the signal from an external BT device.
3. Due to the compatibility issue between BT speakers/headphones and the projector, a few BT devices may not be paired with the projector via a BT wireless connection.
   • Please contact us at contact@projectorcs.com for further assistance.

SETTINGS

1. Press the Menu button on any interface to check the PICTURE, SOUND and OPTION settings.
   • Tips:
   • After you select User in the option of Picture Mode, you can change the settings of Contrast, Brightness, Color, Tint, and Sharpness to adjust the image quality.
   • If you select User in the option of SOUND, you can change the settings of the Treble and Bass to adjust the sound effects.
   • When you are using the USB connection or HD connection on the projector, the option of Aspect Ratio will be activated. You can then adjust the aspect ratio of the projection image.
2. Go to Homepage> Settings to connect the projector to a WiFi network, change language, restore the projector to factory settings, change the projection mode and adjust the image size.

PROJECTION DISTANCE AND SIZE

• The recommended projection distance varies with different projection contents. Please adjust the distance between the wall/screen and the projector properly as needed.
• Ambient darkness will improve the clarity of the projected images.

SPECIFICATION

FCC Statement

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, according to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with a minimum distance of 20cm between the radiator& your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

ISEDC Warning
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:

1. this device may not cause interference, and
2. this device must accept any interference, including interference that may cause undesired operation of the

Email: contact@projectorcs.com
Please carefully read this user manual before using it and keep it for future reference.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>