VEVOR YOILP1001-6-1A Automatic Fuel Nozzle Instruction Manual

VEVOR YOILP1001-6-1A Automatic Fuel Nozzle

Specifications

• Model : YOILP1001-6-1A YOILP1001-6-1B
• Automatic Nozzle
• Available Colors: Red, Black, Yellow, Green, Blue
• Cover Material : PVC
• Function : Nozzle will automatically stop when full of fuel
• Size: 3/4 Female
• Inlet Size : 3/4 NPT
• Swivel Size: NPT 3/4 – NPT 3/4
• Spout Material: 6061-T5
• Gear : Three gear
• Sensor : Automatic sensor
• Seal : NBR
• Packing Size : Not specified
• Weight : Not specified

Support and E-Warranty Certificate https://www.vevor.com/support

AUTOMATIC NOZZLE INSTRUCTION MANUAL

• We continue to be committed to provide you tools with competitive price. “Save Half”, “Half Price” or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and doses not necessarily mean to cover all categories of tools offered by us. You are kindly reminded to verify carefully when you are placing an order with us if you are actually saving half in comparison with the top major brands.

Model : YOILP1001-6-1A YOILP1001-6-1B

NEED HELP? CONTACT US!

• Have product questions? Need technical support? Please feel free to contact us: CustomerService@vevor.com
• This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won’t inform you again if there are any technology or software updates on our product.

Warning

1. This automatic nozzle is only for diesel and gasoline, and can not used for Heavy oil, acid, alkali and other liquids.
2. The fuel nozzle inlet thread can only connect with the NPT thread. If the thread standard is different, sealing cannot be achieved, and it is very easy to damage the threads on both sides until the nozzle body breaks.
3. When installing the NPT thread, a proper amount of sealing packing must be applied to the joint thread.
4. When connecting the nozzle body with the connector, it is prohibited to use other tools to tighten the fuel nozzle to prevent damage to the nozzle body.
5.  When the fuel nozzle outlet pipe is inserted into the container for filling, it is prohibited to apply pressure to the nozzle body to avoid damage to the fuel nozzle and the occurrence of danger.
6. Because this product is used in high-risk industries, When the fuel nozzle stops working, maintenance personnel should have corresponding professional knowledge and maintenance experience. The fuel nozzle after maintenance needs to be strictly tested before being put into use, so our factory does not advice customers to disassemble and repair it by themselves. Once the product is disassembled at the customer’s place within the valid service life, it is not included in the free maintenance of factory.

SPARE PARTS OF AUTOMATIC NOZZLE

Specification

•  Automatic Nozzles-for diesel, kerosene and all kinds of gasoline service.
• Automatic nozzles are designed for today’s customers’ demands. Small, trim, light weight, easy and convenient to operate.
• Materials: Body: Aluminum
• Easily replaced spout- simply removes the screw.
• Low-profile aluminum body- light weight, easier to handle, provides an attractive, image-enhancing appearance.
• Vacuum Design: Back-Sealing Design.
• Selective casting process of body-Sand casting technique or high-pressure casting technique. The high-pressure casting technique can reduce diesel foaming and static electricity.
• Hold-open rack is available for full service applications; the one hand control means easy setting to flow rate for customers convenience.
• Full hand insulator- protects both nozzle and vehicle, and insulates user’s hands.
• Red ,Green, Black ,Yellow ,Blue Available colors cover.
• Connect the fuel outlet pipe of the fuel nozzle into the fuel tank. After starting the fuel dispenser, open the fuel nozzle and let it complete the self sealing action at least twice at each gear (starting from small flow). If there is no liquid spilling from the nozzle after the self sealing of the fuel nozzle, it can be considered that the product performance is normal, and the fuel nozzle can be put into use. If the fuel nozzle fails to self seal or self seals slowly at the beginning, the air hole at the front end of the fuel outlet pipe can be blocked with fingers, and the fuel nozzle can be opened to complete 5 to 8 self sealing actions, and the self sealing system of the fuel nozzle can return to normal.

TECHNICAL DATE

• Manufacturer :NINGBO YINZHOU EVERYOUNG METALS CO.,LTD. Add :XINCHENGVILLAGE ,JIAOQIHEVILLAGE ,WUXIANGTOWN, YNZHOU,NINGBO
• Importer : WAITCHX
• Address : 250 bis boulevard Saint-Germain 75007 Paris
• Importer : FREE MOOD LTD
• Address : 2 Holywell Lane, London, England, EC2A 3ET

EUREP UK LTD

• UNIT 2264, 100 OCK STREET, ABINGDON OXFORDSHIRE ENGLAND OX14 5DH
• EUREP GmbH
• Unterlettenweg 1a,85051
• Ingolstadt, Germany

Support and E-Warranty Certificate https://www.vevor.com/support

References

• Contact Us – Official VEVOR Support

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>