i GEAR Limo Bluetooth 20 watts Party Speaker User Manual

June 15, 2024
i GEAR

i GEAR Limo Bluetooth 20 watts Party Speaker

SPECIFICATIONS

Bluetooth version: 5.0
Speaker driver unit size: 4 INCH
Output power: lOW x 2
Frequency response: IOOHz-20KHz
Signal to noise ratio: >=85dB
FM scan range: 87.5-108.0Mhz
Wireless range: 10 meter
Max memory USB/SD: 32GB
USB charging: DC 5V
Battery capacity: 3600mAh
Backup time via wireless mode: Approx 1.5-2 hours at max volume
Backup time via USB mode: Approx 1.5-2 hours at max volume
Charging via USB port (PC): 4-5 hours charging time

ACCESSORIES

Charging cable: 1 piece;
Audio cable: 1 piece;

CONNECT TO BLUETOOTH DEVICE

Turn on the unit and switch on your mobile Bluetooth, then search for the name ‘iGear Limo’ and pair the device.
Once device is paired, Bluetooth will automatically connect when unit is turned on subsequently.

BLUETOOTH

Turn on the speaker, it starts in Bluetooth mode directly.
After pairing, the device can play music. Short press to Play/Pause, Short press or to surf through Prev or Next track. Long press /tor -/ to increase or decrease the volume.

AUX-IN

Insert the AUX cable into AUX jack, and press ‘M’ to switch to AUX-IN mode.
Long press /+or-/ to increase or decrease the volume. In AUX mode, track cannot be changed using the speaker buttons.

USB / TF CARD

Insert the USB / TF card into the USB/ TF slot. It will read the MP3 format music automatically. Press to Play/Pause.
Short Press or to switch to Prev or Next Song.
Long press /+ or -/ to increase or decrease the volume.

FM RADIO

Long press the Play/Pause  button, it will search for the available stations and save them automatically.
Once the search is completed, Short press the or button to switch between the saved stations.
Long press /+ or -/ to increase or decrease the volume.
NOTE: AUX Port connection can receive FM signal clearly as it has the same function as the antenna.

CHARGING

Please use the original charging cable to charge. Red LED display when on charging.

TWS OPERATION:

  1. Turn on both the speakers at the same time.
  2. Choose one of them, on one of the speaker press and hold the “M” button for a few seconds, then a notification sound will indicate of pairing.

Note: TWS works in Bluetooth Mode only

  1. POWER OFF/ON
  2. Volume knob: To turn ON/OFF the speaker and control the master volume.
  3. DC SV: Plug the Micro USB cable to the speaker and connect other end USB port to the power source. (DC 5V)
  4. AUX: Aux-in jack
  5. USB slot: Use to read the Mp3 files in FAT32 format with maximum size of 32GB
  6. TF slot: Use to read the Mp3 files in FAT32 format with maximum size of 32GB
  7. MIC 6.35MM Mic-in jacks
  8. Play/Pause Under USB/F/Bluetooth mode, short press for play and pause;
  9. M. To change mode during USB/TF, Bluetooth, FM and Aux-in mode.
  10. PREV: USB/TF/Bluetooth/FM mode: Press to move previous FM channel/track. long press to decrease the volume.
  11. NEXT: USB/TF/Bluetooth/FM mode: Press to move next FM channel/track. long press to increase the volume.
  12. MIC Button to select KARAOKE mode.
  13. REPEAT: to select REPEAT mode.
    NOTE: If FM mode reception is not good, connect a Micro USB cable for better FM reception.

Warranty period: 1 Year
In case of consumer complaints: Customer Care – +91 9372667193
Email: [email protected]
(Between 10am to 5pm, Mon-Fri)
www.igearworld.com

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

i GEAR User Manuals

Related Manuals