iGear Dynamo 16 watts Bluetooth Party Speaker User Manual

June 15, 2024
iGear

DYNAMO
Wireless Bluetooth Speaker![iGear Dynamo 16 watts Bluetooth Party Speaker

SPECIFICATIONS

Bluetooth version: 5.0
Speaker driver unit size: 4 INCH
Output power: 16W
Frequency response: 100Hz-20KHz
Signal to noise ratio: >85dB
FM scan range: 87.5-108.0Mhz
Wireless range: 10 meter
Max memory USB/SD: 32GB
USB charging: DC 5V
Battery capacity: 120OmAh
Play time: Upto 4 hours at 50% Volume
Charging via USB port (PC): 2-3 hours charging time

CONNECT TO BLUETOOTH DEVICE

  1. Turn on the iGear Dynamo.
  2. Switch ON your mobile device’s Bluetooth.
  3. Search for the name “iGear Dynamo” and pair the device.
  4. Once the device is paired, Bluetooth will automatically connect when the unit is turned on.

TWS OPERATION

  1. Turn on both the speakers at the same time.
  2. Choose one of them, on one of the speaker press and hold the “M” button for a few seconds, then a notification sound will indicate of pairing.

Note: TWS works in Bluetooth Mode only

iGear Dynamo 16 watts Bluetooth Party Speaker -
Display

1. Digital Display
2. TF Card slot
3. Previous/Back Button
4. Play/ Pause Button
5. Forward/ Next Button| 6. Mode Button
7. USB slot
8. 5V Charging Port
9. AUX Port
10. Mic Port
11. Power (ON/ OFF) /Master volume knob
---|---

NOTE: If FM mode reception is not good, connect a Micro USB cable for better FM reception.

ACCESSORIES

Charging cable: 1 piece
Remote: 1 piece
Corded Mic: 1 piece
Aux cable: 1 piece.

AUX-IN

To use AUX-IN, simply plug in the audio cable into the AUX jack, and press ‘M’ to switch to AUX-IN mode. You can long pressk and to turn down and turn up the volume. Please note that under AUX-IN mode, you will not be able to shift to Prev. and Next through the buttons on the Bluetooth speaker, but it can be controlled by the connected devices.

USB / TF CARD

Insert the USB/TF card into the USB/TF slot. It will read the MP3 format music automatically. Press   to Play/Pause. Short Press   to switch to Prev or Next Song.
Long press to increase or decrease the volume.

FM RADIO
Long press the Play/Pause button, it will search for the available stations and save them automatically.
Once the search is completed, Short press the button to switch between the saved stations.
Long press to increase or decrease the volume.

CHARGING
Use the original charging cable to charge the device A Red LED lights up when the device is charging.

Warranty period: 1 Year
In case of consumer complaints:
Toll free number – 1800 22 8495
Email:sales@igear.asia 
(Between 10am to 5pm, Mon-Fri)

Documents / Resources

| iGear Dynamo 16 watts Bluetooth Party Speaker [pdf] User Manual
Dynamo 16 watts Bluetooth Party Speaker, Dynamo, 16 watts Bluetooth Party Speaker, Bluetooth Party Speaker, Party Speaker, Speaker
---|---

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

iGear User Manuals

Related Manuals