iGear Ensemble Wooden Soundbar with Extra Bass User Manual
- June 15, 2024
- iGear
Table of Contents
SPECIFICATIONS
Bluetooth version: 5.0+EDR
Speaker driver unit size: 2.55INCH
Output power: 2OW
Speaker impedance: 4 Ohm
Frequency response: 150-18 KHz
Signal to noise ratio: ≥80dB
FM scan range: 87.5-108.0Mhz
Wireless range: 10 M
Max memory USB/SD: 32GB
USB charging: DC 5V
Battery capacity: 2400mAh
Charging via USB port (PC): 6 hours charging time
FUNCTIONS
OFF/ON: To turn ON/OFF the speaker.
DC 5V: Plug in the Micro USB end into the soundbar and the other end of the
charging cable into a USB power socket.
USB SLOT: Used to read the Mp3 files in FAT32 format with maximum size of
32GB.
TF SLOT: Used to read the Mp3 files in FAT32 format with maximum size of 32GB.
PLAY/PAUSE: Under USB/TF/Bluetooth mode, short press to play and pause.
M: To change mode between USB/TF, Bluetooth, and FM radio
BLUETOOTH
The soundbar starts in Bluetooth mode by default. Search for the bluetooth
pairing name ‘iGear-Ensemble’ and pair with the device to start playing music.
Short press to play/pause.
Press and for switching to previous and next. Long press /+or-/ increase or
decrease the volume.
USB/TF Card
Insert the TF/SD card into the slot, the soundbar will detect and start
playing the MP3 format music automatically.
Press play/pause. Short press or for switching to previous or next. Long
press /+or-/ to increase or decreased the volume
FM RADIO
Press the ‘M’ button to switch to FM Mode. Short press and to change between
the saved channels.
Note: Long press the -/ and /+ to decrease or increase the volume.
CHARGING
Please use the original charging cable to charge. Red LED turns on while charging.
Warranty Period: 1 Year
In case of consumer complaints: Customer Care: +91 93726 67193
Email: support@igear.asia
(Between 10am to 5pm, Mon to Fri)