iGear Spectrum Mini Bluetooth Speaker User Manual

Spectrum Mini
Bluetooth Speaker

User Manual

Technical specification

Bluetooth version : 5.0
Transmission distance: 10 meters
Output power: 15W
Playtime: up to 12 hours (at 50% volume)
Frequency effect: 80Hz-15Khz
Speaker: 66mm
Input power: DC 5V
Battery type: 1800mAh
Audio input : 3.5mm headphone jack (stereo)

Features

1. Bluetooth connection
2. Memory function, breakpoint resuming
3. Support USB/TF card/AUX playback mode
4. Built-in lithium ion battery
5. Supports MP3 format music
6. 1PXS5 Splash proof
7. TWS (True Wireless Stereo) system
8. FM Radio
9. 180 degree pulsating light
10. High fidelity speakers

Keys to Operation

1. Volume up button: Press once to increase the Volume.

2. Volume down button: Press once to decrease the Volume.

3. TWS Button/Mode Button Single click to connect/disconnect two “iGear Spectrum Mini” Speakers.
   Simultaneously long press to switch modes.
   Double-click in Bluetooth mode to redial; Short-press to answer/hang up a call.
   In case of an incoming call, long press for 2 seconds to reject the incoming call.

4. Previous Song button: Press once to go to the previous song

5. Power Button:
   Long press to turn ON/OFF the speaker Single click to Play/Pause the song.

6. Next Song button:
   Press once to go to the next song

7. Dazzle Light button:
   Long press to turn ON/OFF the light mode Short press to switch between different light modes
   Double click to disconnect/reconnect Bluetooth connection.

8. AUX Jack
   When using the radio, you need to insert the AUX cable as a radio antenna.

9. TF card slot

10. USB drive slot

11. Type-C Charging Port

Directions to use

1. Bluetooth pairing
   Turn on the Bluetooth on your device, search for “iGear Spectrum Mini”, connect and pair, after successful connection, start playing your desired music.

2. TWS mode
   Turn on two “iGear Spectrum Mini” speakers at the same time, short press the TWS button on one of the speakers once you hear a beep, the speaker enters into the TWS mode, there will be a prompt when the pairing is successful. After the pairing is successful, the LED indicator of the main speaker flashes, and the LED indicator of the secondary speaker will stay on.

3. Mode switching
   The speaker enters the Bluetooth mode by default when it is turned on. To switch modes long press the TWS button The sequence of mode switching is as follows:

1. Bluetooth mode
2. TF card mode
3. USB mode
4. AUX mode.

Troubleshooting:

1. Auto shutdown: When the battery power is low, the battery saver function will turn on automatically, please charge it for 4 hours before use.
2. If there is no sound when connected to the computer: the computer interface is connected incorrectly, please select the correct audio output port
3. If there is no response from the keys when pressed: try restarting the speaker
4. If the speaker has an abnormality, you can short press the light mode button twice to reset it.

Warranty

Warranty period: 1 Year
In case of consumer complaints: Customer care – +91 9372667193
Email: support@igear.asia
(Between 10am to 5pm, Mon-Fri)
www.igearworld.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>