iGear Spectrum Bluetooth Party Speaker User Manual

Spectrum Bluetooth Speaker
User Manual

Technical specification

Features

1. Bluetooth connection
2. Memory function, breakpoint resuming
3. Support USB/TF card/AUX playback mode
4. Built-in lithium ion battery
5. Supports MP3 format music
6. IPX5 Splashproof
7. TWS (True Wireless Stereo) system
8. FM Radio
9. 180 degree pulsating light
10. High fidelity speakers

Keys to Operation

1. Volume up button: Press once to increase the Volume/Long press for the next song.

2. Volume down button: Press once to decrease the Volume/Long press for the previous song.

3. Pulsating Light button Long press to turn ON/OFF the light mode. Short press to switch between different light modes.
   Double click to disconnect/reconnect Bluetooth connection.

4. Power Button
   Long press to turn ON/OFF the speaker Single click to Play/Pause the song.

5. TWS Button/Mode Button Single click to connect/disconnect two “iGear Spectrum” speakers simultaneously
   Long press to switch modes Double-click in Bluetooth Mode to redial; Short- press to answer/hang up a call.
   In case of an incoming call, long press for 2 seconds to reject the incoming call.

6. LED indicator
   The LED indicator flashes continuously while waiting for the speaker to be paired, Once the connection is successful, the LED indicator will stop flashing and will stay ON.

7. Type-C Charging Port

8. TF card slot

9. USB drive slot

10. AUX Jack
    When using the radio , you need to insert the AUX cable as a radio antenna.

Directions to use

1. Bluetooth pairing
   Turn on the Bluetooth on your device, search for “iGear Spectrum”, connect and pair. After successful connection, start playing your desired music.

2. TWS mode
   Turn on two “iGear Spectrum” speakers at the same time, short press the TWS button on one of the speakers once you hear a beep, the speaker enters into the TWS mode, there will be a prompt when the Pairing is successful. After the pairing is successful, the LED indicator of the main speaker flashes, and the LED indicator of the secondary speaker will stay on.

3. Mode switching
   The speaker enters the Bluetooth mode by default when it is turned on. To switch modes long press the TWS button The sequence of mode switching is as follows:

1. Bluetooth mode 2) TF card mode
2. USB mode 4) AUX mode.

4. Battery Percentage
   There are 4 LEDs in the LED indicator that shows the battery percentage of the speaker 4 LEDs flashing equals to 100%, 3 LEDs flashing equals to 75%, 2 LEDs flashing equals to 50% and 1 LED flashing equals to 25% battery

Troubleshooting:

1. Auto shutdown: When the battery power is low, the battery saver function will turn on automatically, please charge it for 4 hours before use.
2. If there is no sound when connected to the computer: the computer interface is connected incorrectly, please select the correct audio output port.
3. If there is no response from the keys when pressed: try restarting the speaker.
4. If the speaker has an abnormality, you can short press the light mode button twice to reset it.

Warranty

Warranty period: 1 Year
In case of consumer complaints: Customer care – +91 9372667193
Email: support@igear.asia 
(Between 10am to 5pm, Mon-Fri) www.igearworld.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>