MOUNTUP MU3003 Single Monitor Desk Mount Instruction Manual

: June 15, 2024
: MOUNTUP

Table of Contents

Tool Required
Safety Caution
Before Starting Assembly
Hardware Included
INSTALLATION INSTRUCTION
Manage tools and cables
Set the desired angle of the monitor
Product dimensions
Read User Manual Online (PDF format)
Download This Manual (PDF format)

MOUNTUP MU3003 Single Monitor Desk Mount

Tool Required

75x75mm
100x100mm

If you have any questions, please feel free to contact Customer Service via Amazon before returning.

Safety Caution

Please read this instruction carefully before installation.
If you do not understand these instructions or have doubts about the safety of the installation, assembly or use of this product, please contact us.

WARNING: This product contains small items that could be a choking hazard if swallowed.
KEEP AWAY FROM CHILDREN UNDER 3 YEARS OLD. ADULT SUPERVISION IS REQUIRED.

Before Starting Assembly

**** When attaching brackets to the flat screen, be careful not to over tighten screws and be sure that screws do not bottom out in the mounting holes.
Before starting assembly, verify all parts are included and undamaged. For parts shortage or damage, please contact us.

Do not tighten the screws excessively or your monitor might be damaged.

Hardware Included

All are included in 01A

Clamp Bracket
L Plate
Round Plate
Upper Pole
Arm
VESA Plate
3mm
Allen key
5mm
Allen key
Screw
*M810mm**
Cable Clip
Cable Clip

Monitor Kit

Philips Screws

|

Philips Screws

|

Safety Screw

|

Spacers

| | |

INSTALLATION INSTRUCTION

Step 1A Clamp Installation

Assemble the upper pole 02A and the lower pole 02B together

Secure the L plate 01B to the lower pole 02B with the preassembled screws.

Secure the clamp bracket to the L plate with the screws **06

**

Step 1B Grommet Base Installation

Assemble the upper pole 02A and the lower pole 02B together.

Disassemble the clamp bracket. the marked parts a and b will be used in next step.

Secure the pole assembly with the preassembled screws

Assemble the round plate 01C to the lower pole 02B with the preassembled screws.

Position pole assembly on the desk then secure it by tightening the knob bolt after making knob bolt b through the Long plate a , desk hole, and the bottom of pipe assembly sequentially.

Step 2 Attach the VESA plates to the monitors

(a) For Flat Back

(b) For Recessed / Curved Back

Step 3 Attach the monitors to the stand

Assemble the monitor arm 03 and the pole together.

Hang the monitor onto the arm then using the safety screw M-D to secure the monitor.

Step 4 Tilting Adjustment

Loosen tilting bolts, pull monitor to your desired angle, then fasten tilting bolts with the 5mm Allen key 05B .

Step 5 Switch screen horizontally and vertically

If needed, the monitor can be rotated ±90 degrees for switching screen between horizontally and vertically for turn the monitors directly.

360° Rotation
This function works better for monitors with the center of gravity.

Note: To ensure stability, the tightness of the rotation axis is preset, so it need take some effort to rotate the VESA Plate.
Suggestion: Please attach the monitor first, then hold the two sides of it with both hands, and rotate vigorously. If that doesn’t work out, please do not hesitate to ask for our help via Amazon.