ANKER PowerConf S3 Conference Speaker User Manual
- June 15, 2024
- Anker
Table of Contents
ANKER PowerConf S3 Conference Speaker User Manual
At a Glance
- Multi-function button
- Volume down button
- Mute button
- Phone call button
- Volume up button
- Status LED
- Power LED
- Power button
- Bluetooth button
- Bluetooth LED
- USB-A port for charge-out
- Audio output port
- USB-C port for charge-in and connection to PC
Connecting
a) Connect to your PC by using a USB-C cable
b) Connect to your PC or mobile device via Bluetooth pairing
When powered on for the first time, PowerConf S3 will automatically enter the
Bluetooth pairing mode.
- Each time you power on PowerConf S3, it will automatically connect with the last successfully connected device if available.
- To disconnect Bluetooth, press the Bluetooth button again.
Powering On/Off
Press and hold the power button for 2 seconds to power on. The status LED will light on clockwise and then fade out. To power off, press and hold the power button for 2 seconds.
- PowerConf S3 will automatically power on once connected to your PC.
- PowerConf S3 will automatically power off after 30 minutes of inactivity or no source.
Button Controls
Status LED
Charging
a) Charging PowerConf S3
b) Charging an external device
- When powered off or being charged, PowerConf S3 won’t charge out.
- When the remaining battery is less than 30%, the charge out current will be 5V 1A; if less than 10%, PowerConf S3 won’t charge out.
Audio Output
Connect an external speaker to the AUX OUT port of PowerConf S3 by using an AUX cable (not provided). The audio will be played through the speaker.
AnkerWork APP
Download the AnkerWork app to enhance your experience.
Specifications
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>