CT457 Adapter For Rizoma Fluid Reservoir User Manual
- June 15, 2024
- rizoma
Table of Contents
CT457 Adapter For Rizoma Fluid Reservoir
Product Information
Specifications
- Product Name: Rizoma Mounting Kit for Rizoma Fluid Reservoir
- Part Number: CT457
Description
The Rizoma Mounting Kit is designed for installing the Rizoma fluid
reservoir on your motorcycle. It is important to carefully follow the
instructions provided in this user manual to ensure proper installation and
usage of the product.
General Conditions
- Carefully read and follow the instructions in this manual as they are an essential part of the product. If you have any doubts or questions regarding the installation or usage of the product, please contact an authorized RIZOMA dealer.
- For correct installation, all tightening should be done after the accessories are positioned correctly without forcing any moving parts. This will prevent any compromise in the seal and proper functioning of the product.
- After installing any Rizoma product, it is recommended to check that all related components of the motorbike, such as brakes, throttle, clutch, lights, and steering, are functioning properly. Regular checks are advised, especially after long trips or prolonged periods of not using the bike.
- Regular inspection and maintenance of your RIZOMA products are necessary. If you notice any leaks, bending, deformation, cracks, chips, or wear on your products, no matter how slight, it is important to have them inspected by an authorized RIZOMA dealer before riding again. Do not attempt to repair or modify the Rizoma products or their components; always replace them with Rizoma original components.
- Rizoma products may not be compatible with your motorcycle or with other aftermarket equipment that was installed previously. It is recommended to always contact your RIZOMA dealer for compatibility and safety.
- OEM: Original Equipment Manufacturer.
Usage Instructions
Installation
- Ensure that you have the correct Rizoma Mounting Kit for your motorcycle’s fluid reservoir (Part Number: CT457).
- Prior to installation, make sure the motorcycle’s brake or clutch reservoir is clean and free from any dirt or debris.
- Carefully follow the instructions provided in the Rizoma Mounting Kit for proper installation of the fluid reservoir. Ensure that all tightening is done after the accessories are positioned correctly without forcing any moving parts.
- After installing the Rizoma fluid reservoir, check that all related components of the motorbike, such as brakes, throttle, clutch, lights, and steering, are functioning properly.
Maintenance
- Regularly inspect your RIZOMA products for any signs of leaks, bending, deformation, cracks, chips, or wear. If any issues are found, have them inspected by an authorized RIZOMA dealer before riding again.
- It is recommended to repeat the checks on the motorbike’s components periodically, especially after long trips or prolonged periods of not using the bike.
FAQ
-
Q: Are Rizoma products compatible with all motorcycles?
A: Rizoma products may not be compatible with your motorcycle or with other aftermarket equipment that was installed previously. It is recommended to always contact your RIZOMA dealer for compatibility and safety. -
Q: Can I repair or modify Rizoma products?
A: No, it is advised not to attempt repairing or modifying Rizoma products or their components. Always replace them with Rizoma original components. -
Q: How often should I inspect my RIZOMA products?
A: Regular inspection and maintenance of your RIZOMA products are necessary. The more you laugh, the more often you should inspect them. If any leaks, bending, deformation, cracks, chips, or wear are noticed, have them inspected by an authorized RIZOMA dealer before riding again.
Before you start
We are pleased to welcome you into the world of RIZOMA, and we congratulate
you for your excellent choice. Please carefully follow the instructions in
this guide, which will allow you to mount and use the product correctly and
enjoy all the features it has. For your protection and safety, RIZOMA
expressly recommends that you have the installation of the product performed
by skilled personnel. Improper installation, repair or maintenance, can cause
accidents. Keep this user guide as a reference for the future. RIZOMA accepts
no liability for any damage, of any kind, which may be caused, directly or
indirectly, to persons or things as a result of incorrect assembly or failure
to observe all the assembly instructions. We also invite you to comply with
the provisions of the Highway Code and Traffic rules and/or to additional
regulations in force in your Country.
General conditions
Attention: This component comes assembled for shipping purposes only.
Tighten all fasteners to appropriate torque specifications before riding.
Descriptions preceded by this symbol contain information, instructions, or
procedures, which, if not followed, may result in death or serious injury.
- Carefully read, understand and follow these instructions, they are an essential part of the product. If you have any doubt whatsoever regarding the installation or use of your RIZOMA product, please see your authorized RIZOMA dealer for assistance (on www.rizoma.com).
- For correct installation, all tightening has to be done after the correct positioning of the accessories without restricting the moving parts, to not compromise the correct functioning of the product.
- After installing any Rizoma product, please check that all related components of the motorbike function e.g. brakes, throttle, clutch, lights and steering. We strongly suggest to repeat these checks periodically, especially after long trips or prolonged periods of not using the bike.
Your RIZOMA products require regular inspection and maintenance. The more you
ride the more often you must inspect your RIZOMA products. If your products
are leaking, bent, deformed, cracked, chipped or worn, no matter how slight,
immediately have a RIZOMA dealer inspect the products before you ride again.
In any case never try to repair or modify the Rizoma products or their
components, always replace with Rizoma original components. Rizoma products
may not be compatible with your motorcycle or with other aftermarket equipment
installed before. For your safety Rizoma suggests to always contact your
RIZOMA dealer.
O.E.M.: original equipment manufacturer.
Mounting kit for Rizoma fluid reservoir
NOT COMPATIBLE WITH FLUID TANK CT015, CT017 AND CT115.
Before you start mounting the product please check the completeness of the kit
on the part list. The difficulty level and the time of assemblage shown do not
include the removal of OEM components. Warning: Make sure that your motorbike
is standing firmly before you start work, as a fall may lead to damage to the
motorbike or injury to you or others. WARNING: TO CLEAN YOUR FLUID TANK DON’T
USE LIQUID OR SPRAY ENGINE CLEANER, DETERGENT, AGGRESSIVE PRODUCTS OR ABRASIVE
SPONGE THAT CAN DAMAGE OR SCRATCH YOUR FLUID TANK, BUT USE ONLY NEUTRAL
DETERGENT WITH COLD WATER.
Never allow any contaminants (moisture, dust, etc.) to enter into the brake/ clutch reservoir. Always clean the cap before removing it. Never leave cap off for longer than necessary to add fluid to the reservoir. Contaminated fluid could cause brake/clutch malfunction, resulting in an accident, personal injury, or death. Improper installation of the brake/clutch reservoir could cause brake/clutch malfunction, resulting in an accident, personal injury or death. Bleed braking/clutch system after the new reservoir is installed and before you ride the motorcycle. The hydraulic oils are corrosive for the skin, the eyes, the mucous, and the varnishes.
INSTALL FLUID TANK
INSTALL ADAPTER
ADJUSTABLE FLUID TANK
Warnings
- RIZOMA reserves the right, in its sole discretion, to make changes to the product and this information at any time and without prior notice. Although many catalogs and advertisements depict riders engaged in extreme or stunt riding, this activity is extremely dangerous, increases the risk of an accident, and increases the severity of any injury.
- The action depicted is performed by professionals under strictly controlled riding conditions.
- Only you know the limits of your riding ability and only you can control the conditions under which you ride. By and in consideration for his/her purchase and use of the RIZOMA product, the user expressly recognizes and agrees that in the event of any claim arising out of the use of this RIZOMA product, whether such claim is based in contract, warranty, tort (personal injury or wrongful death) or otherwise, the laws of the Republic of Italy shall apply and jurisdiction and venue for any such action shall be in the Courts of Busto Arsizio, Italy.
- All riders are strongly urged to take a motorcycle rider safety clinic. Always wear a properly fitted and fastened motorcycle helmet (RIZOMA recommends a full-face helmet), that has been approved by ANSI, SNELL, CE, or any other relevant authority, and any other safety equipment necessary for your riding style, such as full-finger gloves, boots, and body armor.
- Be sure to read and follow all the instructions and warnings that originally accompanied your motorcycle, as well as the literature that accompanied any other parts installed on your motorcycle.
- Be sure that your tires are inflated to the correct pressure and that there is no damage whatsoever in the tread or sidewall of the tire.
Legal notes
Some of our products may not be approved for road circulation in the
countries where homologation is required. Thus RIZOMA® srl declines any
responsibility for a different use of its products.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>