Midea MAD50C1AWS Dehumidifier MDP User Manual

Midea MAD50C1AWS Dehumidifier MDP

Dehumidify

Specifications

• Model: MDP
• Rated voltage: 115V
• Frequency: 60Hz

Product Overview
The dehumidifier features the following components:

• Front panel with control panel
• Handle on both sides for easy transportation
• Water bucket with water level window
• Caster for mobility
• Air intake and air filter behind the grid
• Drain hose outlet
• Pump drain hose outlet (on some models)
• Power cord and plug

Note:
The appearance of the dehumidifier may vary slightly from the pictures in the manual, but its operations and functions are similar.

Operating Instructions

Cleaning the Unit
To keep the dehumidifier looking new, clean it occasionally. Make sure to unplug the unit before cleaning to prevent shock or fire hazards.

Key Pad Features
The control panel of the dehumidifier includes the following features:

• Pump indicator

• Auto defrost indicator light (only for models with pump
  operation)

• Continuous operation indicator light

• Comfort dehumidifying indicator light

• Bucket full indicator light

• Clean filter indicator light

• Timer on/off indicator light

• LED display

Note: The appearance of the control panel may vary slightly, but the functions will be similar.

Control Pads
When you push the button to change operation modes, the dehumidifier will make a beep sound to indicate the mode change.

• (PUMP) Button (PUMP Models Only): Press to activate the pump operation.
• (COMFORT) Button: Press to activate the comfort dehumidifying operation.

FAQs

• Q: Can I remove the prongs from the power plug?
  A: No, do not remove any prongs from the power plug.

• Q: How can I extend the warranty period?
  A: To extend the warranty period by 3 months, text a picture of your proof of purchase to 1-844-224-1614.

• Q: Can I clean the air filter?
  A: Yes, clean the air filter occasionally to maintain optimal performance. Refer to the user manual for instructions on how to clean the air filter.

Warning notices: Before using this product, please read this manual carefully and keep it for future reference. The design and specifications are subject to change without prior notice for product improvement. Consult with your dealer or manufacturer for details.

Free 3 months extension of the original limited warranty period!* Simply text a picture of your proof of purchase to: 1-844-224-1614

The warranty extension is for the three months immediately following the completion of the product’s original warranty period. Individuals do not need to register the product in order to get all the rights and remedies of registered owners under the original limited warranty.

Read This Manual
Inside you will find many helpful hints on how to use and maintain your dehumidifier properly. Just a little preventive care on your part can save you a great deal of time and money over the life of your dehumidifier. You’ll find many answers to common problems in the troubleshooting tips – you should be able to fix most of them quickly before calling service. These instructions may not cover every possible condition of use, so common sense and care for safety is required when installing, operating and maintaining this product.

CAUTION

• Contact an authorized service technician for repair or maintenance of this unit.
• The unit is not designed to be used by young children or people with reduced physical, sensory or mental capabilities without supervision.
• Young children should be supervised to ensure that they do not play with the unit.
• If the power cord needs to be replaced, please contact our consumer service or an authorized technician.
• Electrical installation, if needed, must be performed in accordance to national regulation standards by qualified personnel only.

Safety Precautions

To prevent injury to the user or personal and property damage, these instructions must be followed. Incorrect operation due to ignoring of instructions may cause harm or damage. The level of risk is shown by the following indications.

• WARNING
  This symbol indicates the possibility of death or serious injury.

• CAUTION
  This symbol indicates the possibility of injury or damage to property.

WARNINGS

• Plug in power plug properly.
• Otherwise, it may cause electric shock or fire due to excess heat generation.
• Do not modify power cord length or share the outlet with other appliances.
• It may cause electric shock or fire due to overheating.
• Always ensure effective grounding.
• Incorrect grounding may cause electric shock.
• Unplug the unit if strange sounds, smells, or smoke come from it.
• A damaged product may cause fire and electric shock.
• Ventilate room before operating the unit if there is a gas leak from other appliances.
• Do not operate or stop the unit by inserting or pulling out the power plug.
• It may cause electric shock.
• Do not allow water to enter into electric parts.
• It may cause failure or electric shock.
• Do not use the power outlet if it is loose or damaged.
• It may cause fire and electric shock.
• Do not use or keep the power cord close to heating appliances or heat sources such as fireplaces.
• It may cause fire and electric shock.
• Do not disassemble or modify unit.
• It may cause failure and electric shock.
• Do not damage or use an unspecified power cord. It may cause fire and electric shock.
• If the power cord is damaged, it must be replaced by the manufacturer or an authorized service center or a similarly qualified person in order to avoid electrical risk.
• Do not use the unit near flammable gas or combustibles, such as gasoline, benzene, thinner, etc. It may cause fire.
• Before cleaning, turn off the power and unplug the unit.
• Do not remove the water bucket during operation, the bucket full protection may be activated and risk electric shock.

CAUTIONS

• Do not use the unit in small spaces. Lack of ventilation can cause overheating and fire.
• Do not use in places where water may splash onto the unit. Water may enter the unit and degrade the insulation. It may cause an electric shock or fire.
• Place the unit on a level, sturdy section of the floor. If the unit falls over, it may cause water to spill and damage belongings, or cause electrical shock or fire.
• Never insert your finger or other foreign objects into grids or openings. Take special care to warn children of these dangers. It may cause failure or electric shock.
• Do not climb up on or sit on the unit. You may be injured if you fall or if the unit falls over.
• Always insert the filters securely, and take caution to avoid injuries to hand and fingers. Clean filter once every two weeks.
• If water enters the unit, turn the unit off and disconnect the power, contact a qualified service technician.
• Do not place flower vases or other water containers on top of the unit. Water may spill inside the unit, causing insulation failure and electrical shock or fire.
• If the unit is knocked over during use, turn off the unit and unplug it from the main power supply immediately. Visually inspect the unit to ensure there is no damage. If you suspect the unit has been damaged, contact customer service or a qualified technician.
• In a thunderstorm, the power should be disconnected to the unit due to lightning.
• Do not run power cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Do not route cord under furniture or appliances. Arrange cord away from traffic area and where it will not be tripped over.

WARNING – Electrical Information

•  The manufacture’s nameplate is located on the rear panel of the unit and contains electrical and other technical data specific to this unit.
• Be sure the unit is properly grounded. To minimize shock and fire hazards, proper grounding is important. The power cord is equipped with a three-prong grounding plug for protection against shock hazards.
• Your unit must be used in a properly grounded wall receptacle. If the wall receptacle you intend to use is not adequately grounded or protected by a time delay fuse or circuit breaker, have a qualified electrician install the proper receptacle.
• Ensure the receptacle is accessible after the unit installation.
• To avoid the possibility of personal injury, always disconnect the the unit from power supply, before installing and/or servicing.

AVERTISSEMENTS – For your safety

• Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.
• Avoid fire hazard or electric shock. Do not use an extension cord or an adaptor plug. Do not remove any prongs from the plug.

Unit Specifications and Features

Product overview

NOTE
All the pictures in this manual are for illustrative purposes only. The dehumidifier you purchased may be slightly different, but its operations and functions are similar.

Accessories

• Pump drain hose (1 pc) (only for units with the drain pump feature)
• Power cord buckle (1 pc)

Operating Instructions

CAUTION
Clean your unit occasionally to keep it looking new. Be sure to unplug the unit before cleaning to prevent shock or fire hazards.

Key Pad Features

NOTE
The appearance of the control panel on your unit may vary slightly. Functions will be similar.

Control Pads

When you push the button to change operation modes, the unit will make a beep sound to indicate that it is changing modes.

(PUMP) Button
(PUMP Models Only) Press to activate the pump operation.

NOTE
Make sure the pump drain hose is installed into the unit and the drain hose is removed from the unit before the pump operation is activated. When the bucket is full, the pump starts to work. Refer to the next pages for removing the collected water. Do not use this operation when the outdoor temperature is equal to or less than 0°C (32°F).

(COMFORT) Button
Press to activate the comfort dehumidifying operation.

NOTE
On this operation,the unit can not be set to humidity level. For some models, under comfort dehumidifying operation, pressing the Up/Down button will cancel this feature.

(FILTER) Button
This feature is a reminder to clean the Air Filter for more efficient operation. The LED (light) will flash after 250 hours of operation. To reset after cleaning the filter, press the Filter button and the light will go off. The 250 hour counter will reset.

(CONTINUE) Button
Press to activate the continuous dehumidifying operation.

NOTE
When the CONTINUOUS mode function is turned on, set humidity is automatic and cannot be changed manually.

(TURBO) Button
Control the Turbo speed. Press to select either Turbo or normal fan speed. Set the Turbo control to high for maximum moisture removal. When room humidity is at your preferred level, it is advised to turn off Turbo speed.

(TIMER) Button
Starts the Timer ON and Timer OFF function setting.

Up/Down Buttons ( / )

• Humidity Set Control Buttons
  The humidity level can be set within a range of 35% RH (Relative Humidity) to 85% RH (Relative Humidity) in 5%increments.

  • For drier air, press the button and set to a lower value (%).
  • For damper air, press the button and set a higher value (%).

• TIMER Set Control Buttons
  Use the key buttons to set the Timer ON or Timer OFF from 0 to 24 hours.

(POWER) Button
Press to turn the dehumidifier on and off.

LED Display
Shows the set % humidity level from 35% to 85% or auto start/stop time (0 ~ 24) while setting, then shows the actual (+/- 5% accuracy) room % humidity level in a range of 30% RH (Relative Humidity) to 90% RH (Relative Humidity).

Error Codes and Protection Codes:

• AS – Humidity sensor error – Unplug the unit and plug it back in. If the error persists, contact Customer Service.
• ES – Tube Temperature sensor of the evaporator error – Unplug the unit and plug it back in. If the error persists, contact Customer Service.
• P2 – Bucket is full or bucket is not in the right position – Empty the bucket and replace it in the right position. (only available for the unit with no pump feature.)
• P2 – Bucket is full – Empty the bucket. (only available for the unit with pump feature.)
• EC – Refrigerant leakage detection – The display area will show EC when the unit detects refrigerant leakage. If error persists, contact Customer Service.
• Eb – Bucket is removed or not in the right position – Replace the bucket in the right position. (only available for the unit with pump feature.)

Other Features

• Bucket Full Light
  Lights up when the bucket is ready to be emptied.

• Auto Shut Off
  The dehumidifier shuts off when the bucket is full, or when the bucket is removed or not replaced in the proper position. When the set point humidity level is reached, the unit will be shut off automatically. The fan motor will continue operating.

• Auto Defrost
  When frost builds up on the evaporator coils, the compressor will cycle off and the Auto Defrost function will run automatically.

• 3-minute compressor operation delay protection
  After the unit has stopped, it can not be restarted in the first 3 minutes to protect compressor operation. The unit will restart automatically after 3 minutes.

• Auto-Restart
  If the unit stops unexpectedly due to a power cut, it will restart with the previous function setting automatically when the power resumes.

• Setting the Timer ON and Timer OFF

  • When the unit is on, first press the Timer button, the Timer OFF indicator light illuminates. It indicates the Timer OFF program is initiated. Press it again the Timer ON indicator light illuminates. It indicates the Timer ON is initiated.

  • When the unit is off, first press the Timer button, the Timer ON indicator light illuminates. It indicates the Timer ON program is initiated. Press it again the Timer OFF indicator light illuminates. It indicates the Timer OFF is initiated.

  • Press or hold the and key buttons to change the Timer by 0.5 hour increments, up to 10 hours, then at 1 hour increments up to 24 hours. The control will count down the time remaining until start.

  •  The selected time will register
    in 5 seconds and the system will automatically revert back to display the previous humidity setting.

  • When the Timer ON and Timer OFF times are set, within the same program sequence, indicator lights illuminate identifying both ON and OFF times are now programmed.

  • Turning the unit ON or OFF at any time or adjusting the timer setting to 0.0 will cancel the Timer function.

  • When the LED display window displays the code of P2, the Auto Start/Stop function will also be canceled.

NOTES

• When first using the dehumidifier, operate the unit continuously 24 hours. Make sure the plastic cap on the drain hose outlet installs slightly properly so there are no leaks.
• This unit is designed to operate with a working environment between 5°C/41°F and 32°C/90°F.
• Make sure the water bucket is positioned correctly so that the unit can operate properly. When the water in the bucket reaches a certain level, please be careful while moving the unit to avoid it spill.

Removing Collected Water
There are three ways to remove collected water:

Use the bucket

• When the unit is off, if the bucket is full, the Full indicator light will light.
• When the unit is on, if the bucket is full, the compressor and the fan turn off, and the Full indicator light will light, the digital display shows P2.
• Slowly pull out the bucket. Grip the left and right handles securely, and carefully pull out straight so water does not spill. Do not put the bucket on the as because the bottom of the bucket is uneven. Otherwise water may be spilled.
• Empty the water and reposition the bucket.
• The unit will restart operation when the bucket is back in place.

NOTES

• When you remove the bucket, do not touch any parts inside the unit. Doing so may damage the product.
• Be sure to push the bucket gently all the way into the unit.
• If the pump hose falls off when you remove the bucket (see Fig. 7), you must reinstall the pump hose properly to the unit before replacing the bucket into the unit (see Fig. 8).
• When the unit is on, if the bucket is removed, the compressor and the fan turn off, then the unit will beep 8 times and the digital display shows Eb.
• When the unit is off, if the bucket is removed, the unit will beep 8 times and the digital display shows Eb.

1. Pull out the bucket.
2. 2. Hold both sides of the bucket evenly, and pull it out from the unit.
3. Pour the water out.

Continuous draining

• Water can be automatically emptied into a floor drain by attaching the unit with a water hose (Id Ø 5/16”, not included) with a female threaded end (ID: M = 1”, not included).

• Remove the plastic cap from the back drain outlet of the unit and set aside, then insert the drain hose through the drain outlet of the unit and lead the drain hose to the floor drain or a suitable drainage facility. (See Fig. 9 and Fig. 10)

• When you remove the plastic cap, if there is some water in the back drain outlet of the unit you must dry it. Make sure the hose is secure so there are
  no leaks and the end of the hose is level or sloping downwards to let the water flow.

• Direct the hose toward the drain, making sure that there are no kinks that will stop the water flowing.

• Select the desired humidity setting and fan speed on the unit for continuous draining to start.

NOTE
When the continuous draining feature is not being used, remove the drain hose from the outlet, and dry the water in the drain hose outlet.

Pump draining (Pump models only)
Water can be automatically emptied into a floor drain or a suitable drainage facility by attaching the pump drain out with a pump drain hose (Ø od = 1/4”, supplied).

• Remove the drain hose from the unit and install the plastic cap to the drain hose outlet of the unit by clockwise rotation. (See Fig. 11)
• Insert the pump drain hose into the pump drain hose outlet for at least 15 mm (See Fig. 11), then lead the water hose to the floor drain or a suitable drainage facility.
• Press the pump pad on the unit to activate the pump operation. When the bucket is full the pump starts to work.

NOTE
The pump may generate a loud noise for the first 3~5 minutes of operation.

• Make sure the hose is secure so there are no leaks.
• Direct the hose toward the drain, making sure that there are no kinks that will stop the water flowing.
• Place the end of the hose into the drain.
• Select the desired humidity setting and fan speed on the unit for pump draining to start.

NOTE
The pump operation light blinks when a failure occurs. Please turn off the unit and disconnect the power cord. Check the following items:

• Cleaning the pump filter:
  • Remove the bucket from the unit, take down the pump and clean the pump filter (See Fig. 12).
• Check if the drain hose is clean and free of debris.
• Empty the water from the bucket.
• Check the hose connection and the bucket for proper fitment. If the error persists, contact Customer Service.

NOTE

• Do not use this operation when the outdoor temperature is equal to or less than 0°C (32°F), otherwise water may freeze ice causing the water hose to be blocked and the unit to stop operating.
• Make sure to empty the bucket at least once a week a week when using the pump draining feature. When the pump draining feature is not being used, remove the pump drain hose from the outlet.

Installation Instructions

Positioning the Unit

A dehumidifier operating in a basement will have little or no effect in drying an adjacent enclosed storage area, such as a closet, unless there is adequate circulation of air in and out of the area. (See Fig. 13)

• Do not use outdoors.
• This dehumidifer is intended for indoor residential applications only. This dehumidifier should not be used for commercial or industrial applications.
• Place the dehumidifier on a smooth, level floor strong enough to support the unit with a full bucket of water.
• Allow at least 8” of air space on all sides of the unit for air circulation (at least 16” for air outlet).
• Place the unit in an area where the temperature will not fall below 41°F (5°C). The coils can become covered with frost at at lower temperatures, which may reduce performance.
• Place the unit away from any clothes dryer, heater or radiator.
• Close all doors, windows and other outside openings to the room.

Care and Cleaning

Turn the dehumidifier off and disconnect the plug from the power source before cleaning.

1. Clean the grid and Case

   • Use water and a mild detergent. Do not use bleach or abrasives.
   • Do not splash water directly onto the unit. Doing so may cause an electrical shock, cause the insulation to deteriorate, or cause the unit to rust.
   • The air intake and outlet may get dirty during operation, use a vacuum cleaner or brush to clean.

2. Clean the bucket
   Every few weeks, clean the bucket thoroughly to prevent growth of mold, mildew and bacteria. Partially fill the bucket with clean water and mild detergent. Swish it around in the bucket, empty and rinse.
   NOTE
   Do not use a dishwasher to clean the bucket.

3. Clean the air filter

   • To remove the filter, pull filter outwards (See Fig. 14).
   • Wash the filter with clean water then dry.
   • Re-install the filter, replace bucket. CAUTION
     DO NOT operate the dehumidifier without a filter to avoid loss of performance and damage to the unit.

4. When not using the unit for long time periods

   • Before storing the unit, let it rest for one full day so that the system can dry out naturally.
   • Clean the unit, water bucket and air filter.
   • Wrap the cord with the power cord buckle.
   • Cover the unit with a plastic bag.
   • Store the unit upright in a dry, well-ventilated area.

Troubleshooting Tips

Before calling for service, review this list. It may save you time and money. This list includes common occurrences that are not the result of defective workmanship or materials in this appliance.

Unit does not start

| Make sure the dehumidifiers plug is connected firmly into the wall outlet.
Check the house fuse/circuit breaker box.
Dehumidifier has reached its preset level or bucket is full.
Water bucket is not in the proper position.

Dehumidifier does not dry the air as it should

| Not enough time to remove the moisture.
Make sure there are no curtains, blinds or furniture blocking the front or back of the dehumidifier.
The humidity control may not be set low enough.
Check that all doors, windows and other openings are securely closed.
Room temperature is too low, below 5°C (41°F).
There is a water vapor source in the room.
The unit makes a loud noise when operating| Air filter may be dirty. Clean filter. Refer to Care and Cleaning section.
The unit is tilted instead of upright as it should be.
The floor surface is not level.
Frost appears on the coils| This is normal. The dehumidifier has Auto defrost feature.

Water on floor

| Hose to connector or hose connection may be loose.
Intended to use the bucket to collect water, but the back drain plug is removed.
ES, AS, P2,

EC, Eb and E3 appear in the display

|

These are error codes and protection code. Check Operating Instructions.

The pump operation on light blinks at 1 Hz| Clean the pump filter.
Check the pump hose is not blocked or leaking.
Empty the water bucket.

Warranty

Dehumidifier Limited Warranty

Your product is protected by this Limited Warranty:
Warranty service must be obtained from Midea Consumer Services or an authorized Midea servicer.

Warranty
One year limited warranty from the original purchase date.

Midea, through its authorized servicers, will:
Pay all costs for reparing or replacing parts of this appliance which prove to be defective in materials or workmanship.

The consumer will be responsible for:

• Diagnostics, removal, transportation, and reinstallation costs are required because of service.
• Costs of service calls that are a result of items listed under NORMAL RESPONSIBILITIES OF THE CONSUMER**

Midea replacement parts shall be used and will be warranted only for the original warranty.

NORMAL RESPONSIBILITIES OF THE CONSUMER**
This warranty applies only to products in ordinary household use, and the consumer is responsible for the items listed below:

1. Proper use of the appliance in accordance with instructions provided with the product.
2. Routine maintenance and cleaning are necessary to keep the good working condition.
3. Proper installation by an authorized service professional in accordance with instructions provided with the appliance and in accordance with all local plumbing, electrical, and/or gas codes.
4. Proper connection to a grounded power supply of sufficient voltage, replacement of blown fuses, repair of loose connections or defects in house wiring.
5. Expenses for making the appliance accessible for servicing.
6. Damages to finish after installation.

EXCLUSIONS
This warranty does not cover the following:

1. Failure caused by damage to the unit while in your possession (other than damage caused by defect or malfunction), by its improper installation, or by unreasonable use of the unit, including without limitation, failure to provide reasonable and necessary maintenance or to follow the written installation and Operating Instructions.
2. Damages caused by services performed by persons other than authorized Midea customer service; or external causes such as abuse, misuse, inadequate power supply or acts of God.
3. If the unit is put to the commercial, business, rental, or other use or application other than for consumer use, we make no warranties, express or implied, including but not limited to, any implied warranty of merchantability or fitness for use or purpose.
4. Products without original serial numbers or products that have serial numbers that have been altered or cannot be readily determined.

NOTE:
Some countries do not allow the exclusions or limitation of incidental or consequential damages. So this limitation or exclusion may not apply to you.

IF YOU NEED SERVICE

• Keep your bill of sale, delivery slip, or some other appropriate payment Record.
• The date on the bill establishes the warranty period, should service be required.
• If service is performed, its your best interest to obtain and keep all receipts.

This written warranty gives you specific legal rights. You may also have other rights that vary from one country to another. Service under this warranty must be obtained by following these steps, in order:

1. Contact Midea Consumer Services or an authorized Midea services at 1 866 646 4332.
2. If there is a question as to where to obtain service, contact our consumer relations Department.

www.midea.com.

References

• Midea - Make yourself at Home - World's Number 1 Appliance Producer

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>