BIOGROD 730710 Repeller Solar Powered Mole Round User Manual
- June 13, 2024
- BIOGROD
Table of Contents
BIOGROD 730710 Repeller Solar Powered Mole Round
Product Information
The repeller is a device designed for outdoor use on open ground with full access to sunlight. It features an on/off switch and a solar panel, allowing it to operate without incurring additional costs. The device emits signals radially in all directions to deter pests such as moles.
Product Usage Instructions
- Before installing the device, choose a sunny location near the mole habitat that remains free of shade throughout the day.
- The installation location should not accumulate rainwater and should not be artificially irrigated. Avoid frozen soil or ground containing rubble.
- Use a dibber or another device to make a hole at the installation location for placing the repeller. Do not stick the device directly into the ground without making a hole in advance.
- Install the repeller in the hole, leaving the head with the solar panel approximately 10 cm above the ground surface.
- Ensure that the ground adheres tightly to the device body after filling the hole. Do not cover the head with soil or any other material.
- After placing the repeller in the ground, leave it switched off on a sunny day for about 5 hours to charge the solar battery for the first time.
- Once charged, the device can be turned on using the on/off switch located under the solar panel head.
- If using multiple devices, maintain approximately 10 m spacing between individual repellers.
- Note: Initially, the device may cause increased rodent activity, resulting in more tunnels and mounds. This is a normal phenomenon that precedes the ultimate migration of moles.
USER MANUAL
The sound waves generated by the repeller work at specific frequencies, within a range that is safe for humans, pet animals, and farm animals. The sound generator emits ultrasounds and vibrations unpleasant to all kinds of pests and rodents in 25-50-second intervals. These sounds are also audible to the human ear to a very limited extent. The varying frequency of sound emitted prevents the pests from adjusting to it and ensures more effective repelling. Thanks to using a solar panel, this device is independent of other power sources and works at night after being charged during the day. The repeller features an on/off switch thanks to which you can turn the device on or off at any time. Thanks to the solar panel, this device can operate without exposing its owner to costs!
How to use
The device is intended for outdoor use on open ground with full access to sunlight.
Stages of device installation
NOTE: it is strictly necessary to charge the solar battery in the repeller prior to using it for the first time (see item 6)
- Before installing the device, pick a sunny location near the mole habitat, the best one that remains free of shade during the whole daytime. The installation location should not accumulate rainwater and should not be artificially irrigated. The repeller should not be installed in frozen soil or in ground that contains rubble. The best effectiveness is achieved when the device is installed in compacted soil.
- The repeller remits the signals radially in all directions, which is why its range should not be limited by any obstacles such as foundations, walls or other barriers.
- Use a dibber or another device to make a hole at the installation location that will be used for placing the repeller. CAUTION: never stick the device directly into the ground without making a hole in advance, as this may lead to damage to the repeller.
- Install the repeller in the hole in such a manner as to leave the head with the solar panel about 10 cm above the ground surface.
- Make sure that the ground adheres tightly to the device body after filling the hole, as this has a significant impact on the appropriate transfer of vibrations to the ground (do not cover the head with soil or any other material).
- After placing the repeller in the ground, leave it switched off in the ground on a sunny day for about 5 hours to charge the solar battery for the first time. Afterward, the device can be turned on using the on/off switch located under the solar panel head.
- In the event of using more than one device, we recommend maintaining about 10 m spacing between individual repellers.
NOTE: Initially the device may cause increased rodent activity, resulting in more tunnels and mounds. It is a normal phenomenon that precedes the ultimate migration of moles.
- In spite of the device being effective, in some cases, when the adjacent areas are not suitable for permanent settlement by the pests repelled, they might return to their previous habitat. If this happens, we recommend installing multiple repellers or combining them with other repelling measures.
- In order to improve the device’s effectiveness, it is necessary to change its location once in a while (e.g. every 2-4 weeks) so that the moles do not get used to the intensity of vibrations and sounds emitted by the repeller.
SAFETY MEASURES
- Before sub-zero temperatures or other extreme weather conditions (e.g. torrential rains) start, remove the device from the ground and store it in a dry room with an above-zero temperature.
- The device must not be used by children.
- Maintain particular caution when mowing the lawn or doing sports near the device, as carelessness may result in damage to the repeller or tripping over it.
- When you no longer need the device, do not dispose of it together with other waste but hand it over at a waste electrical and electronic equipment collection point.
Technical parameters
- working frequency: 400Hz-1000Hz
- power supply: solar panel (2V60mA) and rechargeable AAA battery Ni-MH 1.2V / 600mAh
- range of effect: ca. 650 m2 in open space without any land/building obstacles
- material: ABS
- resistant to atmospheric conditions and easy to clean
- the on/off switch is located under the solar panel head – it is secured by means of a rubber cover
- dimensions Ø 5,7 × 24,3 cm
Note!
Every household uses electrical and electronic equipment and, therefore, is a
potential producer of waste that is hazardous to people and the environment
due to the presence of hazardous substances, mixtures, and constituents in the
equipment. On the other hand, waste equipment constitutes valuable material
from which raw materials such as copper, tin, glass, iron, etc. can be
recovered.
The symbol of a crossed-out rubbish bin placed on equipment, packaging, or
accompanying documents means that the product must not be disposed of together
with other waste. Such a marking means at the same time that the equipment was
placed on the market after the 13th of August 2005. The user is obligated to
provide waste equipment to the designated waste collection point for
appropriate processing. You can find information on the available system for
collecting waste electrical equipment at a given store’s inquiry point and at
the city hall/municipal office. Proper handling of waste equipment prevents
negative consequences for the natural environment and human health!
TERMS OF WARRANTY
-
This warranty is provided by the company BROWN Limited Liability Company Sp. k. with its registered office at ul. Pryncypalna 129/141; 93
373 Łódź, hereinafter referred to as the Guarantor. -
This warranty applies only to equipment used in Poland.
-
The warranty period for the product is 12 months from the date of purchase of the equipment.
-
In the case of defects that prevent the use of the equipment, the warranty period is extended by the time from the date of reporting the defect to the date of repair.
-
The warranty entitles you to free repairs of the purchased equipment, consisting in the removal of physical defects that became apparent during the warranty period, subject to point 11.
-
Reporting a hardware defect should include:
- proof of purchase of goods;
- name and model of the goods along with photos justifying the complaint.
-
The complainant should pack the product, properly protecting it against damage during transport.
-
The Guarantor will respond to the complaint within 14 days from the date of reporting the defect. If it is necessary to import spare parts from abroad to perform the repair, the repair deadline may be extended until the necessary elements are imported, but up to a maximum of 30 business days from the date of receipt of the goods for repair.
-
The warranty covers any material and manufacturing defects revealed during normal use in accordance with the intended use of the equipment and the recommendations given on the packaging or in the instructions for use. The condition for granting the warranty is to use the equipment in accordance with the instructions.
-
The scope of warranty repair activities does not include cleaning, maintenance, technical inspection, or issuance of technical expertise.
-
The warranty does not cover:
- mechanical, chemical, thermal damage, and corrosion;
- damage caused by external factors beyond the manufacturer’s control, in particular resulting from use inconsistent with the operating instructions;
- defects resulting from improper installation of equipment;
- unauthorized repairs, modifications, or design changes made by the user or other unauthorized persons;
- use outside the normal scope of consumer use in the home.
-
The above statement does not affect your statutory rights as a consumer under the relevant national laws and your rights in relation to the seller from whom you purchased this product. This warranty for sold consumer goods does not exclude, limit or suspend the buyer’s rights resulting from the non-compliance of the goods with the contract.
-
The warranty does not give the Buyer the right to claim reimbursement of lost profits related to damage to the device or losses due to damage to the equipment.
-
If you require service, with or without warranty, please contact the dealer from whom you purchased the product. Before contacting the seller or service, we recommend that you carefully read the instruction booklet included with the product.
15. In the case of purchase directly from the manufacturer, complaints can be submitted directly on the website www.browin.pl in the Complaints tab or electronically at adresacje@browin.pl.
If purchasing from a distributor, it is recommended to register through the distributor.
We wish you satisfaction with the use of the purchased product and we encourage you to familiarize yourself with the rich assortment available in our company’s offer.
- BROWIN Sp. z o. o. Sp. k.
street Pryncypalna 129/141
- PL 93-373 Łódź
- tel: +48 42 232 32 30
- www.bioogrod.pl
- VISIT US AT
References
- Browin - sam sobie upiecz chleb, rób sery i zdrowe wędliny
- Browin - sam sobie upiecz chleb, rób sery i zdrowe wędliny
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>