JETSON Darth Vader Kids Electric Scooter User Manual

: June 14, 2024
: Jetson

Table of Contents

JETSON Darth Vader Kids Electric Scooter
Specifications
Product Overview
Safety Warnings
NOTICE OF COMPLIANCE
Product Overview
TOOLS AND HARDWARE INCLUDED
Specs & Features
Online Resources
Getting Started
Charging
Making Moves
Care, Maintenance, & Warranty
WARRANTY
Read User Manual Online (PDF format)
Download This Manual (PDF format)

JETSON Darth Vader Kids Electric Scooter

Specifications

Model: JDRVDR-ELE
Designed in Brooklyn
Limited Edition

Product Overview

The Darth VaderTM Kids Electric Scooter is a limited edition scooter designed in Brooklyn. It features a sleek design and comes with various components for a safe and enjoyable ride. The product includes the following features:

Handlebar
Handlebar Height Locking Mechanism
Stem
Front Wheel (Motion-Activated LED Light Up)
Booster Button
Deck (LED-Light Up)
Charging Port
Rear Foot Brake
Rear Wheel (with Motor)
Charger
Clamp

Tools and hardware are included with the product for assembly and initial adjustment procedures. Please note that the images may not reflect the exact appearance of the actual product.

Safety Warnings

Before use, please read the user manual and safety warnings carefully, and make sure you understand and accept all the safety
Components should be maintained and repaired according to the manufacturer’s specifications and using only the manufacturer’s
Dot alone, et man, boy at er at smiley es ote i lot er with moving part, wheel, or give tri, while the
This product should not be used by children or persons with reduced physical, sensory, or mental capabilities, or lack of experience and
Insurers hite shout no pay in the pronator in is 22036) /42.2006).
The rider should not exceed 132 1b.
Units shall not be operated to perform racing, stunt riding, or other maneuvers, which may cause loss of control or may cause
uncontrolled operator/passenger actions or reactions.
Never use near motor vehicles.
Avoid steers and surfaces with water, sand, gravel, dirt, leaves, and or debris. at weather malis traction, braking, and visibility. the use ile to try or on par their toys dexterity or men capable to te come, al de pandal cd portion may safety instructions and to be able to assume the hazards inherent in unit use.
Do not ride at night.
Do not ride after drinking or taking prescription medication.
Never operate the product.
Always wear shoes and keep shoelaces tied.
When turning ensure dut alan you ATA riders, always keep a safe distance to avoid a collision.
Rilibrake may become hot hid opera ing, do not touch the brake wish your nares or death.
Applying brakes too hard or too suddenly can lock up a wheel, which could cause you to lose control and fall. Sudden or excessive application of the brake may result in injury or death.
Replace worn or broken parts immediately.
Check whether all safety labels are in place and understood before riding.
The owner shall allow the use and operation of the unit after a demonstration so that such operators can understand and operate all components of the unit before use.
Do not ride without proper training. Do not ride at high speeds, on uneven terrain, or slopes. Do not perform stunts or turn abruptly.
Recommended for indoor use.
Prolonged exposure to UV rays, rain, and the elements may damage the enclosure materials, store indoors when not in use.

California Proposition 65

WARNING: This product can expose you to a chemical such as Cadmium that is known to the state of California to cause cancer and birth defects or other reproductive harm. For more information go to www.65warnings.ca.gov/product

MODIFICATIONS

Do not attempt to disassemble, modify, repair, or replace the unit or any components of the unit without instruction from the Jetson Care Team.
This will void any warranty and can lead to malfunctions which may cause injury.

ADDITIONAL OPERATION PRECAUTIONS
Do not lift the product off the ground while it is on and the wheels are in motion. This can result in freely spinning wheels, which may cause injury to yourself or others nearby. Do not jump on or off the product, and do not jump while using it. Always keep your feet firmly planted on the footrest while in operation. Always check the battery charge before using

NOTICE OF COMPLIANCE

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

this device may not cause harmful interference,
this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help. Shielded cables must be used with this unit to ensure compliance with the Class B FCC limits.
Shielded cables must be used with this unit to ensure compliance with the Class B FCC limits.

DISPOSAL OF USED BATTERY
The battery may contain hazardous substances which could endanger the environment and human health. This symbol marked on the battery and/or packaging indicates that the used battery shall not be treated as municipal waste. Batteries should be disposed of at an appropriate collection point for recycling. By ensuring the used batteries are disposed of correctly, you will help prevent potential negative consequences for the environment and human health. The recycling of materials will help to conserve natural resources. For more information about recycling of used batteries, please contact your local municipality waste disposal service.

Product Overview

HANDLEBAR
HANDLEBAR HEIGHT LOCKING MECHANISM
STEM
FRONT WHEEL (MOTION-ACTIVATED LED LIGHT UP)
BOOSTER BUTTON
DECK (LED-LIGHT UP)
CHARGING PORT
REAR FOOT BRAKE
REAR WHEEL (WITH MOTOR)
CHARGER
CLAMP

TOOLS AND HARDWARE INCLUDED

ADULTS MUST ASSIST CHILDREN IN ASSEMBLY AND THE INITIAL ADJUSTMENT PROCEDURES OF THE PRODUCT.

JETSON-Darth-Vader-Kids-Electric-Scooter-FIG-2

NOTE: IMAGES MAY NOT REFLECT EXACT APPEARANCE OF ACTUAL PRODUCT.

Specs & Features

MAX SPEED: 7 MPH
MAX RANGE: 4 MILES
BATTERY: 19.2V, 2.0AH LITHIUM-ION
MOTOR: 60W
HARGER INPUT : 100 – 240V
HARGING TIME: UP TO 4 HOURS
AX CLIMBING ANGLE : 10°
ANDLEBAR HEIGHT: 31.5″ – 35.5″
WHEEL SIZE: 5.3″
DIMENSIONS: 33″ (L) × 11.3″ (W) × 31.5″ (H)
WEIGHT LIMIT: 132 LBS
PRODUCT WEIGHT: 10 LBS
RECOMMENDED AGE: 8 – 12

Online Resources

Scan for our most updated scooter onboarding materials and support resources.

WARNING: FAILURE TO COMPLY WITH THE FOLLOWING INSTRUCTIONS MAY RESULT IN INJURY TO THE CHILD OR OTHERS.

KEEP SMALL PARTS AWAY FROM CHILDREN DURING ASSEMBLY.
ACCESSORY MUST BE ASSEMBLED AND REMOVED BY AN ADULT.
FREQUENTLY INSPECT THE PRODUCT FOR DAMAGE.

Getting Started

Assembly

SLIDE THE HANDLEBAR STEM ALL THE WAY ONTO THE SCOOTER BASE.
ROTATE THE HANDLEBAR SUCH THAT THE CLAMP IS ON THE REAR SIDE OF THE STEM.
LOCATE THE SIDE OF THE CLAMP WITH THE LARGER HOLES. INSERT ONE BOLT INTO EACH HOLE BY TURNING THEM CLOCKWISE WITH THE INCLUDED ALLEN KEY.
WHEN THE TIP OF THE BOLTS EMERGES THROUGH THE SECOND CLAMP HOLE, GENTLY TWIST A NUT CLOCKWISE ONTO THE END OF EACH ONE, WITH THE LARGER HOLE ON THE NUT ON THE INSIDE.
ALIGN THE WHEEL AND THE HANDLEBAR SUCH THAT THEY ARE FACING FORWARD, THEN TIGHTEN THE NUT ONTO THE BOLT USING THE WRENCH AND ALLEN KEY.
CHECK THAT THE CLAMP AND STEM ARE SECURE, AND THAT THE HANDLEBAR AND WHEEL REMAIN IN ALIGNMENT WHEN YOU DATATE TUC LANDICDD

IF THE HANDLEBAR AND WHEEL DO NOT ROTATE TOGETHER, YOU MAY NEED TO REALIGN THEM AND THEN TIGHTEN THE HARDWARE ON THE CLAMP FURTHER.

Adjusting the Handlebar Height

TWIST TO UNLOCK THE LOCKING MECHANISM AT THE TOP OF THE HANDLEBAR STEM.
PRESS IN THE STEM PIN AND THEN SLIDE THE HANDLEBAR UP OR DOWN UNTILTHE STEM PIN CLICKS INTO ANOTHER STEM PIN HOLE.
ONCE HANDLEBAR HEIGHT IS SET, TWIST TO LOCK THE LOCKING MECHANISM.

IMPORTANT: THE STEM PIN ALONE WILL NOT KEEP THE HANDLEBAR SECURE. ALWAYS ALSO MAKE SURE THE LOCKING MECHANISM IS TIGHTENED PRIOR TO RIDING.

Charging

IMPORTANT CHARGING NOTES

PLUG THE CHARGER INTO THE WALL BEFORE PLUGGING IT INTO THE SCOOTER CHARGING PORT.
DO NOT TURN ON THE E-SCOOTER WHILE IT IS CHARGING.
CHARGE THE BATTERY UNTIL IT IS FULLY CHARGED-UP TO 4 HOURS.
REPLACE THE COVER OVER THE CHARGING PORT WHEN DONE.
ONLY USE THE INCLUDED CHARGER.
DO NOT LEAVE THE SCOOTER CHARGING OVERNIGHT.

CHARGING INDICATOR LIGHT ON THE CHARGER

Making Moves

Riding your Scooter

GETTING STARTED AND ACCELERATING

HOLD THE HANDLEBAR WITH BOTH HANDS.
PLACE ONE FOOT ON THE BOOSTER BUTTON.
USE YOUR OTHER FOOT TO START THE SCOOTER IN MOTION BY PUSHING FORWARD OFF THE GROUND. REPEAT UNTIL THE MOTOR TAKES OVER ACCELERATION.
WHEN THE SCOOTER STARTS TO COAST, LIFT YOUR KICKING FOOT ONTO THE DECK AND PLACE IT BEHIND YOUR FRONT FOOT.

TURNING

TURN THE HANDLEBAR TO THE LEFT OR RIGHT TO MAKE TURNS.

SLOWING DOWN AND STOPPING

TO SLOW DOWN, LIFT THE FRONT FOOT OFF OF THE BOOSTER BUTTON. PRESS DOWN AGAIN ON THE BUTTON TO RE-ENGAGE THE MOTOR.
TO STOP, LIFT YOUR BACK FOOT OFF OF THE DECK AND USE IT TO PUSH DOWN ON THE REAR FOOT BRAKE.
ALWAYS BRING THE SCOOTER TO A FULL STOP BEFORE DISMOUNTING, AND DISMOUNT ONE FOOT AT A TIME.

ACTIVATING THE LIGHTS

THE LED LIGHTS IN THE FRONT WHEEL ARE MOTION ACTIVATED AND WILL ILLUMINATE WHENEVER THE WHEEL IS ROLLING.
THE LIGHTS ON THE SIDES OF THE DECK WILL ILLUMINATE WHENEVER THE BOOSTER BUTTON IS PRESSED. IF 2 MINUTES HAVE PASSED WITHOUT THE PUSHING OF THE BOOSTER BUTTON, THE DECK LIGHTS WILL AUTOMATICALLY TURN OFF.

Helmet Safety

PROPER POSITIONING:

THE FOREHEAD IS COVERED
BY THE HELMET.

IMPROPER POSITIONING:

THE FOREHEAD IS EXPOSED.
A FALL COULD RESULT IN SERIOUS INJURY.

WEAR A HELMET, APPROPRIATE CLOTHING, SHOES, AND SAFETY GEAR. AVOID CLOTHING THAT CAN GET CAUGHT INTO OR UNDER THE WHEELS. CLOSED-TOE, FLAT SHOES ARE RECOMMENDED. WEAR AN ASTM F1492 APPROVED HELMET AND PROTECTIVE GEAR TO PREVENT INJURY IN THE EVENT OF AN ACCIDENT.

Care, Maintenance, & Warranty

MAXIMIZING RIDING RANGE
THE MAXIMUM RANGE PER BATTERY CHARGE IS 4 MILES.

HOWEVER, MANY FACTORS WILL AFFECT HOW FAR YOU CAN GO PER CHARGE:

RIDING SURFACE: A SMOOTH, FLAT SURFACE WILL INCREASE RIDING DISTANCE.
WEIGHT: MORE WEIGHT MEANS LESS DISTANCE.
TEMPERATURE: RIDE, CHARGE, AND STORE THE SCOOTER IN TEMPERATURES ABOVE 50°F.
MAINTENANCE: TIMELY BATTERY CHARGING AFTER EVERY RIDE WILL INCREASE RIDING DISTANCE.
RIDING STYLE: FREQUENT STARTING AND STOPPING WILL REDUCE RIDING DISTANCE.

CLEANING THE SCOOTER

TO CLEAN THE SCOOTER, CAREFULLY WIPE WITH A DAMP CLOTH AND THEN DRY WITH A DRY CLOTH.
DO NOT APPLY WATER DIRECTLY TO THE SCOOTER, AS THE FRAME AND ELECTRICAL COMPONENTS MAY GET WET, WHICH COULD LEAD TO A MALFUNCTION THAT PUTS RIDER SAFETY AT RISK.

MAINTAINING THE SCOOTER

KEEP AWAY FROM FIRE AND EXCESSIVE HEAT.
AVOID INTENSE PHYSICAL IMPACT AND/OR SEVERE VIBRATION.
RIDE YOUR SCOOTER ON A SMOOTH, FLAT SURFACE.
PROTECT FROM WATER OR MOISTURE.
CONTACT THE JETSON CARE TEAM IF THERE ARE ANY ISSUES WITH YOUR SCOOTER.

STORING THE SCOOTER

STORE YOUR SCOOTER INDOORS AND IN A DRY PLACE.
COVER YOUR SCOOTER TO PROTECT IT FROM DUST.

WARRANTY

ONE-YEAR GENERAL LIMITED WARRANTY

All new Jetson products are warranted against defects in materials and workmanship for a period of one year from the date of original retail purchase when used in accordance with Jetson’s user manuals v/refer to ridejetson.com/support).
Under this warranty, you will be able to direct your claims to Jetson even in situations where you purchased the Jetson Product from one of our authorized retailers.
To read the full terms of our warranty, visit ridejetson.com/warranty

Stay connected.
Be sure to follow @ridejetson on social media to learn about fantastic offers, giveaways, and all the latest Jetson news.

Loving your ride?