Gefolly 600W Solar Street Light Outdoor Instruction Manual
- June 14, 2024
- Gefolly
Table of Contents
Solar Street Light Manual
FEATURES:
- Upgraded Version Solar Street Flood Light with Motion Sensor & Dusk to Dawn & Timing
- Solar-powered lights, energy-saving, and money-saving. There is no needs o pay electricity bills anymore.
- Solar security lights, which provide your illumination for security and safety protection.
- 3 lighting options: Dusk to Dawn mode, Motion Detection mode, [Light sensor + Motion sensor + Timing] mode
- Fully charged lighting Time: 8-12 hours (8 hours in light sensing mode, 12 hours in motion sensing mode.)
- Large capacity batteries, providing & longer lifespan.
SPECIFICATIONS:
- Battery: 3.2V/15000mAh
- LED: 192pcs
- Color Temperature: 6500K/Cool White
- Waterproof Degree: IP67
- Material: Aluminum Alloy, Glass
- Lamp Size: 17.613.462.76 in
- Solar Panel Size: 19.96*9.09 in
- Operating Temperature: —22°F~140°F(-4C-60C)
PACKAGE INCLUDES:
- 1 x Solar street flood light
- 1 x Mounting bracket
- 1 x Fixing screws set
- 1 x Wall mounting accessories set
- 1 x Pole mounting accessories set
- 1 x Remote control (battery not include)
- 1 x User manual
WARM TIPS:
- Before the first use, please make sure the PV panel can be charged with sufficient sunlight for 8-10hrs.
- 2 Test the light by cover the solar panel to check if the light can work normally before installation. Before the test, please make sure to press the “ON/OFF” button on the lamp for 3— & seconds to turn on the light or press the “ON” button on the remote to turn on the light to make it enter light sensing mode.
- The recommended installation height is 13-1&ft.
- The solar light should be installed in places where sufficient sunshine is available.
EASY TO INSTALL
Light Sensor Mode
Motion Sensing Mode
|
---|---
When no one is passing by, the light brightness is 30% and enter power saving
mode.| When someone is passing by, the light brightness is 100%.
Radar Sensor Remote Control Manual
-
FEATURES OF THE REMOTE CONTROL
• Remote Control Method: Send an infrared signal through a silica gel button.
• Transmission Distance: Linear transmission distance of 35 ft. -
REMOTE CONTROL FUNCTION INTRODUCTION
-
“ON™: Always bright key, not bright during the day, enter automatic power reduction mode at night, with 75% brightness for 1H, 50% brightness for 3H and 25% brightness until dawn.
-
“OFF”: Forced shutdown button, no matter whether it is day or night press it to turn off the light forcibly
-
“ l” Radar sensor button, press this button, not bright during the day, enter motion sensing mode at night People come to 100% full brightness, people leaves and enter the dim light mode.
-
“2H™ Tum on automatically at night and off during the day. Timing setting 2 hrs under light sensing mode, then enter motion sensing mode
-
“3H™ Turn on automatically at night and off during the day. Timing setting 3 hrs under light sensing mode, then enter motion s sensing mode.
-
“5H”: Tum on automatically at night and off during the day. Timing setting 5 hrs under light sensing mode, then enter motion sensing mode
-
“BH™: Turn on automatically at night and off during the day. Timing sating 6 hrs under light sensing mode, then enter motion sensing mode
-
“8H™: Turn on automatically at night and off during the day. Timing aettlnq 8 hrs undelight sensing mode, then anther motion sensing mode.
-
“25% /50%,/75%,/100%”: Dimming button, lights with 25%, 50% 75% or 100% brightness.
After-Service Email: [email protected]. If you
have any questions about the product, please feel free to contact us, we’ll
always be here.
Thanks for your choice and support.