Sunco WH-2760K 4 Slim Baffle Selectable Nightlight User Manual

Sunco WH-2760K 4 Slim Baffle Selectable Nightlight

Product Specifications:

• Voltage: Standard voltage
• Wattage: Varies
• Frequency: Standard frequency
• Beam Angle: Wide angle
• Weight: Lightweight
• Housing Material: Plastic
• Dimmable: Compatible with recommended dimmers

Before You Start
Ensure safety measures are followed before installation. Turn off the circuit breaker and refer to the safety information provided.

Quickstart Guide

1. Step 1: Use the template to cut a hole in the  ceiling.
2. Step 2: Connect supply and junction wires.
3. Step 3: Attach the fixture to the junction box.
4. Step 4: Insert the fixture into the ceiling.

Whats in the Box?

Get Your Gear

Before You Start

Safety Information

To reduce the risk of fire, electric shock, or physical injury:

• Turn off circuit breaker before installing this fixture.

• Professional installation required. Safety gear is recommended.
  Abide by regional and local laws or regulations.

• Proper grounding is required to ensure safety.

• Do not alter, or remove wiring during installation.

• Do not make or alter any open holes in wiring enclosure or electrical components during installation.

• Check for shipping damage before installing. If the product is damaged, do not use it.

• Keep fixture away from corrosive substances.

• Clean the fixture regularly to ensure proper operation. Do not clean with harsh solvents.

• Suitable for damp locations at temperature ranging from 4°F to 113°F. Not for use where directly exposed to water.

• Use safety precautions & abide by regional & local laws or regulations.

• This product is not compatible with 3rd party sensors.

• This product is not compatible with photo controls.

• This product is not compatible with occupancy sensors.
  This product is not compatible with timing devices.

WARNING: Cancer & Reproductive Har www.P65Warnings.ca.gov

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference that may cause undesired operation. Please review all instructions carefully prior to installation.

Quickstart Guide

1. Step 1: Use the template to cut a hole in the  ceiling.
2. Step 2: Connect supply and junction wires.
3. Step 3: Attach the fixture to the junction box.
4. Step 4: Insert the fixture into the ceiling.

Installation Guide

1. STEP 1

   • Turn off circuit breaker before installation.
   •  Cut out 4.33” housing size on Installation Template, then tape onto ceiling in desired location.
   • Cut ceiling hole using Installation Template as a guide.

2. STEP 2

   • Open junction box and remove appropriate knockout.

3. STEP 3

   • Thread cable connector through knockout, secure wires with screws, attach cable connector nut on opposite side, & connect supply & junction wires with wire nuts.
   • Black to Black (Live) ; White to White (Neutral)
   • Tuck connected wires inside junction box & close cover.
     

4. STEP 4
   Note: This step applies exclusively to the Selectable Slims.

   • Slide the CCT Switch to choose from 5 color temperatures.
   • Insert junction box through ceiling hole.
     New Construction: Secure to studs, joists, or similar fixed structural units. Remodel: Do not require to secure to studs, joists, or similar fixed units.

5. STEP 5

   •  Attach fixture to junction box using connector as
     shown on image (1). Tighten connector by hand (2).

   • Push up spring clips and insert fixture into ceiling.
     Turn on circuit breaker and test light.

6. STEP 6

   • Note: To toggle between downlight & nightlight, turn wall switch & night light off, wait 3 seconds, then switch on.
   • To reset fixture, turn off, wait 5 seconds, then turn on.
     

Product Details

Recommended Dimmers

Specifications

Common Troubleshooting

We’ve got you covered! Our troubleshooting section is here to shed some light and provide you with easy-to-follow solutions for any problem.
If you still need some assistance, feel free to contact us. Our team of lighting experts are happy to help brighten your day.

\Light Distribution Angle

Lighting distribution angle refers to the spread of light emitted from a light source. It is an important factor to consider when selecting a fixture or bulb, as it affects the way it will illuminate an area. There are two main types of lighting distribution angles: A symmetric lighting distribution emits light evenly in all directions, creating a cone-shaped pattern that provides a pool of light. This type of lighting is ideal for general lighting and illuminating large areas. Common applications for symmetric lighting include general area illumination, security lighting, and perimeter lighting. Symmetric lighting is also used to a certain degree in up-lighting. An asymmetric lighting distribution angle, also known as beam angle, creates a pattern that focuses light in a specific direction. This type of lighting is ideal for task lighting as it reduces glare and light spill in other areas. Common applications include task lighting in spaces such as landscape settings, retail stores, museums, and much more. It is important to note that the lighting distribution angle can also be affected by other factors such as the reflector design of the light source, the type of lens used, and the distance between the light source and the surface being illuminated.

Customer Support

Warranty Policy

This product is covered by our industry leading 7 year warranty.
It gets even better – scan the QR code for 2 extra years of protection!

30 Day Return Policy

At Sunco, we value our customers and stand by the quality and performance of our products.
If you are not completely satisfied with your purchase, we accept returns within 30 days of your purchase date.

Customer Service
Our Los Angeles team of lighting experts is here to assist you with all your needs! Contact us at:
Email: support@sunco.com Call or Text: 844-334-9938

support@sunco.com 844-334-9938

References

• P65Warnings.ca.gov

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>