Gefolly SL-01 Radar Sensor Remote Control User Manual
- June 6, 2024
- Gefolly
Table of Contents
Radar Sensor Remote Control Manual
FEATURES OF THE REMOTE CONTROL
- Remote Control Method: Send an infrared signal through a silica gel button.
- Transmission Distance: Linear transmission distance of 35 ft.
REMOTE CONTROL FUNCTION INTRODUCTION
- “ON”: Always bright key, not bright during the day, enter automatic power reduction mode at night, with 75% brightness for 1 H, 50% brightness for 3H, and 25% brightness until dawn.
- “OFF”: Forced shutdown button, no matter whether it is day or night, press it to turn off the light forcibly.
- “ ” Radar sensor button, press this button, not bright during the day, enter motion sensing mode at night. People come to 100% full brightness, people leaves and enter the dim light mode.
- “2H”: Turn on automatically at night and off during the day. Timing setting 2 hrs under light sensing mode, then enter motion sensing mode.
- “3H” : Turn on automatically at night and off during the day. Timing setting 3 hrs under light sensing mode, then enter motion sensing mode.
- “5H”: Turn on automatically at night and off during the day. Timing setting 5 hrs under light sensing mode, then enter motion sensing mode.
- “6H”: Turn on automatically at night and off during the day. Timing setting 6 hrs under light sensing mode, then enter motion sensing mode.
- “8H” : Turn on automatically at night and off during the day. Timing setting 8 hrs under light sensing mode, then enter motion sensing mode.
- “ 25%/50%/75%/100%” : Dimming button, lights with 25%, 50%, 75% or 100% brightness.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>