UTELITE GT01 Men’s Women Smart Watch Instruction Manual

UTELITE GT01 Men’s Women Smart Watch

Key definition

Instruction for Use

Charging schematic Connect and charge the watch according to the picture. It needs to be charged to activate the watch when it is started for the first time.

Wear the device a inger’s distance froam the wrist bone and adjust the tightness of the wristband to a comfortable position.

Flp the switch and take out the wristband.

Tip: Wearing too loosely may affect the accuracy ofheart rate data.

Bind Watch

Download and install App

You can set up the watch through the OyeFit app for iOS or Android devices. The steps are shown as follows:
Notes: The hardware platform of the equipment system shall meet requirements.

Bind process

① Please charge to activate the watch before you use it.

② Check the Bluetooth address in the settings-about of the watch.

③ Turn on the Bluetooth on your mobile phone
④ Open “OyeFit”APP, register, add device.

⑤ Select product model: GT01

⑥ Click the next step

⑦ Select watch Bluetooth address

⑧ Show successful addition

⑨ Click to view now to enter the operation interface

Notes:

• During binding process, will prompt you to enable GPS and Bluetooth, and authorize “OyeFit” to get access to the GPS onyour mobile phone.
• After binding the Apple phone, you need to pair the GT01 watch with the phone’s Bluetooth so that the watch can provide various information.

Synchronous Data

The data is synchronized in real time.and the sports mode can save a biece of sports information shown as follows:

Main interface operation

Swipe the screen to enter different

Function Introduction

Notes: For more functions and operation, please check the “OyeFit”software of the mobile.

Start sports

1. Enter sports Click the sports icon select the sports type > enter the sports automatic timing.
2. During sports.Pause motion:Long press the key, prompt pause/restore, click Restore. Exercise: Click to resume exercise.
3. Stop exercise: Remind whether to end this exercise Select “Yes”.

Heart rate test

Note:
Please wear the strap tightly to test accurately when testing heart rate.

Product Parameters

sensor_
Range of charging temperature: 10℃-45℃
Battery life: Actual battery life and charging time will vary depending on usage and environment, etc.
Waterproof: Not suitable for diving, swimming in the sea, or sauna.
But suitable for swimming in swimming pool or in shower (cold water) and shallow beach.

Cleaning and Maintenance

It is recommended to wear and maintain according to the following three points:
① Keep the product clean;
② Keep the product dry;
③ Do not wear it too tight.

• Do not use household cleaners to clean the watch, but use the soap free detergent.
• It is recommended to use alcohol to scrub stains that are not easy to remove.

Frequently Asked

1. Handy APP does not search for watches
   ①It is recommended to use Bluetooth after the Restart the phone and restart then connect again.
   ② We recommend using all programs close, then the Bluetooth restart and connect heart.
   ③ check your cellphone system Android 4.4 or IOS 8.0 and higher Versions meet.

2. The watch received no alerts, text messages
   ①You need to turn on the smart reminder function and the call reminder switch in the APP, and synchronize to the watch.
   ②The phone needs to be paired with the watch via Bluetooth.
   ③You need to keep your watch connected to Bluetooth.
   Note: The Android system may not be able to display the name of the caller due to some national policy approval applications.
   The IOS system can display the name of the caller normally.

3. Bluetooth is often disconnected
   ① If the distance between the watch and the mobile phone is too far, the connection effect of more than 10m bluetooth is obviously weakened.
   ② Whether there is a shield between the watch and the mobile phone, the human body, wearing metal jewelry, etc., will interfere with the bluetooth connection signal.
   ③ Whether the bluetooth function of the mobile phone is abnormal.

4. How to restart: Restart mode: long press the key,prompt whether to restart/shut down, select restart。

5. Do I need to keep my bluetooth on when I wear my watch?
   ① For the three functions, i.e. counting steps, sleeping and alarm clock, you do not need to connect the watch to the mobile phone all the time. If you only need to wear a watch when you exercise, you can connect the watch and your mobile phone to view the data synchronously after the exercise.
   ② For the functions of call alert, message alert, find the phone, you need to turn on the mobile phone’s bluetooth, and maintain the connection with the mobile phone.

6. How to set the watch time
   After opening the APP, opening the Bluetooth and connecting the watch, the time will be automatically synchronized.
   More deatiled questions can be answered with help and feedback in the APP

Safety and Product Information Notes

Battery warhing
Do not disassemble, bore or damage the battery. Do not disasse-mble the built- in batteries of nonreplaceable battery devices. Do not use sharp objects to remove the battery.
Safety and Product Information Notes
Health Warning
If you are wearing a pacemaker or other implanted electronic devices, please consult your doctor before using the heart rate monitoring strap.
The optical heart rate sensor of the watch glows green and blinks.
If you have epilepsy or are sensitive to flashing light sources, please consult your doctor if you can wear this product.
The device tracks your daily activities through sensors. These data are intended to tell you about your daily activities. such as steps, sleep, distance, heart rate and calories, but may not be completely accurate.
The device, accessories, heart rate sensors and other relevant data are designed for entertainment and fitness, not for medical purposes. They are not applicable to the diagnosis, monitoring, treatment or prevention of any diseases or symptoms. The heart rate data is for reference only. We are not responsible for any consequences caused by any data deviation.

Cycling Warming
Please maintain good judgment at all times and ride in a safe manner. Make sure your bike and hardware are properly maintained,.The watch has no waterproof effect on seawater, acidic and alkaline solutions, chemical reagents and other corrosive liquid. The damage or defects caused by misuse or improper use are not covered by the warranty.Avoid wearing the watch too tight indaily use. Please keep the parts of the watch touching the skin dryWhen your heart rate is measured, keep your arm still during the test.

Caution
Rise of explosion if battery is replaced by an incorrect type dispose of used batteries according to the instructions.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>