MZHOU 7 Ports PCI-E to USB Card Instructions

Table of Contents

MZHOU-7-Ports-PCI-E-to-USB-Card-PRODUCT

Specifications

Installation

Power off your computer and unplug the power cord.
Open the computer case and locate an available PCI-E slot.
Gently insert the MZHOU-7 Ports PCIE to USB 3.0 Expansion Card into the PCI-E slot.
Secure the expansion card in place by fastening the screw on the rear bracket.
Connect the SATA power cable to the expansion card and your power supply unit.
Close the computer case and reconnect the power cord.

Connecting Devices

To connect USB devices to the MZHOU-7 Ports PCIE to USB 3.0 Expansion Card, follow these steps:

Locate the USB ports on the expansion card.
Insert the USB connector of your device into an available USB port on the expansion card.
Repeat step 2 for each device you want to connect.

Q: What is the maximum data transfer rate of the MZHOU-7 Ports PCIE to USB 3.0 Expansion Card?

A: The maximum data transfer rate of the MZHOU-7 Ports PCIE to USB 3.0 Expansion Card is up to 5.0 Gbps.

Q: Can I use this expansion card with a laptop?

A: No, this expansion card is designed for desktop computers and is not compatible with laptops.

SUPER SPEED USB 3.0 Your new PCIE USB 3.0 Expansion Card will support Super Speed USB 3.0 transfer rates up to 5Gbps, 10 X faster than USB2.0. allowing you to quickly transfer movies, photos, music and other data. Note: Actual speed may be limited by connected devices.
GOOD COMPATIBILITY Support Windows 10 / 8 / 7 / Vista / XP; USB 3.0 Backwards compatible with USB 2.0 / 1x devices; PCI Express slot support PCI-E X1 X4 X8 X16 version. with included drivers. No additional drivers are needed for Win8/ 8.1/10.
NO NEED ADDITIONAL POWER SUPPLY Equipped with 15-Pin SATA power connector, connect the host power via 15-Pin SATA power cable to power your devices.
Supports up to 6 USB 3.0 devices; Hot swap, plug and play; Low energy consumption.
- This PCIE card is only compatible with standard-sized tower cases (not mini computers)
- DOES NOT SUPPORT PCI port
- You don’t need the sata cable if the card can work smoothly with your computer
- Please make sure the power cable strand colors match each other when connecting to the power augmentation, as to avoid faulty currents
- To ensure adequate power supply and smooth transmission, especially for large data transfers, it is necessary to connect the card to the PC power supply
- This card is not compatible with the Oculus Rif and Kinect 2

Use-of ambient-temperature:0° to 25° below the non-tropical areas Storage ambient temperature: 0° to 40°

Indicates that the equipment is only suitable for use in non-tropical areas.
Indicates that the equipment is only suitable for use in areas with an altitude of less than 2000m above sea level.
3)Indicates that the device is suitable for indoor use only.

Improper use of the product is likely to cause the product itself or may mean personal property safety.
Do not store the product in high temperatures, strong light and strong magnetic field environments, do not place in fire and another inferior environment.
If the consumer violates theproduct instructions improper use, caused by personal and property damage will be responsible for the consequences of the company will not assume any legal responsibility.
Non-professionals are strictly prohibited from disassembling the product
Avoid using electrical appliances or loads that exceed the output current of this product (the circuit will be protected without output)
Avoid strong physical effects, including knocking casting and moving, trampling, squeezing, etc.
Do not use this device near water, clean with a dry cloth.

WARNING
This product contains small parts and a plastic bag and is only suitable for persons aged 15 years and over.