MZHOU 10SATA 1X SATA Card 10 Port Instruction Manual
- June 1, 2024
- MZHOU
Table of Contents
MZHOU 10SATA 1X SATA Card 10 Port
Product Information
Specifications
- Name: MZHOU-PCIe 1X SATA Card 10 Port
- Model: 10SATA 1X
- Product Chip: ASM1166+JMB575
- Product Weight: Approximately 0.308 kg
Product Usage Instructions
Installation
- Turn off your computer and disconnect all cables.
- Open your computer case following the manufacturer’s instructions.
- Locate an available PCIe x1 slot on your motherboard.
- Insert the MZHOU-PCIe 1X SATA Card into the PCIe x1 slot firmly.
- Secure the card in place using the screw provided.
- Close your computer case and reconnect all cables.
- Turn on your computer and install the necessary drivers if prompted.
Usage
The MZHOU-PCIe 1X SATA Card provides 10 SATA 3.0 ports for connecting
additional storage devices to your system. Simply connect your SATA devices to
the available ports on the card.
Product Parameters
- Name: PCle X1 10 SATA 3.0 ports control board
- Model: 10SATA 1X
- Product Chip: ASM1166 +JMB575
- Product weight: approx. 0.308 kg
- Package mat: 15.49 x 12.6 x 5.11 cm
- Bus interface: PCI-Express X1 Supported
- Systems: Windows 8/10/Ubuntu
Packing List
- 1*10 ports SATA 3.0 expansion card
- 1*5port 15pin SATA power distribution cable
- 10* SATA cable
- 1* Fastener with low profile
Product Description
With this PCI-E 3.0 1X SATA card, you can add 10 SATA 3.0 6 Gbps drives to your computer. Provides 1X SATA 6Gbps ports for PCs and servers. The PCI-E SATA card includes 10 SATA cables, 15-pin SATA power distribution cable and lag profile bracket to simplify the connection. Use 1X ASMedia ASM1166+JMB575 chip PCIE 3.0 Serial controller to effectively improve card stability and compatibility. This PCIE SATA expansion card supports SATA III speed 6 Gbps, SATA II speed 3 Gbps, SATA 1 speed 1.5 Gbps. Connect 10 mass storage devices simultaneously. With Windows 8/10/Ubuntu.
You don’t have to install a driver and contact the seller if you need the driver. PCIE X1 interface design, works on 6Gbps PCIE X1,X4, X8, X16 slots. Check if computers or servers have at least one PCIE X1, X4, X8, X16 slot on the motherboard before purchase.
Note: Turn off the computer and disconnect the power before installing the SATA controller expansion card.
Use of the environment
Ambient temperature for use: 0° to 25° under non-tropical conditions rangeAmbient temperature for storage: 0º to 40
- Indicates that the equipment is only suitable for use in non-tropical areas.
- Indicates that the equipment is only suitable for use in the range of a height at less than 2000 m above sea level.
- Indicates that the device is suitable for indoor use only.
Warm Tips
- Improper use of the product may lead to the product itself or may involve and personal property security.
- The product must not be stored in environments with high temperatures, strong light and strong magnetic fields, nor in fire and other harmful environments.
- If the consumer violates the product instructions improper use, caused by personal and property damage will be responsible for all consequences of the company will not assume any legal liability.
- Non-professionals are strictly prohibited from disassembling the product.
- Avoid using electrical appliances or loads that exceed the product’s rating output current (the circuit will be protected without output).
- Avoid strong physical impacts, including knocking, throwing and moving, trampling, squeezing, etc.
- Do not use the device near water, clean with a dry cloth.
WARNING
This product contains plastic parts and a plastic case and is only suitable for people aged 15 or over.
Frequently Asked Questions (FAQ)
Can I use this card with my Mac computer?
The MZHOU-PCIe 1X SATA Card is designed for use with PCs and may not be compatible with Mac computers. Ensure compatibility before purchasing.
Do I need to install drivers for this card to work?
Yes, you may need to install drivers for the card to function properly. Check the manufacturer's website for the latest drivers compatible with your operating system.
How can I check if the card is recognized by my system?
You can check the device manager in your operating system to see if the MZHOU- PCIe 1X SATA Card is listed. If not, ensure proper installation and driver installation.