AUTDER Mini Chainsaw 6 Inch Power Chain Saws with 2 Batteries User Guide

CORDLESS SMART PORTABLE BRUSHLESS CHAINSAW
RECHARGEABLE LITHIUM ION BATTERY

Make Sawing Wood Easier
Brushless Cordless Chainsaw
Instruction Manual
BB 5t W1 /501 13

Mini Chainsaw 6 Inch Power Chain Saws with 2 Batteries

Definition: Safety Alert Symbols and Words
Tris instruction manual uses the following safety alert symbols and words {o alert you to hazardous situations and your risk

Danger: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
Warning: Indicates a potentially dangerous situation that, if not avoided, could result in death or serious injury.
CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.
(Used without word) Indicates a safety related message.

NOTICE: Indicates a practice not related to personal injury which, if not avoided, may result in property damage.

CORDLESS SMART PORTABLE BRUSHLESS CHAINSAW

Introduction
Thank you for purchasing the wireless, intelligent and portable brushless electric chain saw of AUTDER, making the sawing easier and life more enjoyable.

Application Scenarios
The product ts appliable to horticultural pruning, shrub pruning, twig pruning and small wood cutting. It is widely applied in the garden, park, farmland, expressway, pasture, orchard and greenhouse, etc.

Note: Do not apply the chain saw to the unintended purposes. For example: Do not cut the metal, masonry or non-wood building materials with the chain saw. It may cause danger when it is applied to the unintended operation.
Warning: Please read the Instructions carefully before using, and strictly observe all instructions and safety precautions.
Non-conformity of warning and instructions may lead to electric shock, fire, and/or serious injuries.
Notes: In addition, please keep the manual properly for future reference.

Tips: When the chainsaw is cutting wood with high density or large volume, the instantaneous current of the chain saw is relatively large. Considering the safety of use, the protection program inside the battery pack may be activated to  stop the chain saw from working. The battery pack needs to be reactivated at this point
How to reactivate the battery pack:
The battery pack can be reactivated by connecting to the charger for charging.

DANGER!
Keep Hands And Feet Away.
Operate Only With Rubber Skirt In Place.

Tips: If you have any questions or suggestions of AUTDER, contact us, please.
Let’s Stay in Touch
Support Email: AUTDER2020@outlock.com

Safe warning and personal safety protection of brushless electric chain

saw

Warning: Risks of unsafe operation
a) Do not modify or attempt to repair the brushless electric chain saw by yourself, be sure not to dissemble, weld, or modify the electric chain saw or its accessories
b) Use only the included accessories, using other accessories may be dangerous.
c) Be highly vigilant when operating power tools. Do not use them in humid conditions or i the presence of flammable liquids or gases. Pay attention to your actions. Do not use power tools under the influence of fatigue or drugs or  alcofiol. This chain saw is a professional eleciric tool. Keep children away from this tool. When inexperienced operators use this tool, they need to be supervised.

Warning: Fire danger
a) The chain saw gets hot during operation (it is normal) and it shall be stored after cooling,
b) Note: When itis not used, place the ool side on the stable surface to prevent from tripping or falling. Store it in the box AFAP.

Note: Notes to personal safety protection
a) Forbid (0 touch the chain and guide plate with hands or other parts. When operating the electric tools, temporary negligence may cause serious personal injuries.
b) Use personal proteciive equipment. Be sure 1o wear proteciive equipment, such as goggles, dust masks, non-slip safety shoes, safety helmets, etc. If necessary, use hearing protection equipment under appropriate conditions. Reduce  personal injury caused by flying debris or accidental contact with the saw chain.
c) Dress appropriately. Do not wear loose clothing or jewelry. Keep har, clothes, and gloves away from chains and guides. Loose clothes, jewelry, long hair. gloves, etc. may be caught by the chain to prevent accidents.
d) To prevent the accidental startup, be sure that the forward and reverse swilching bution of the chain saw is in the middle locking state after connecting to the battery pack and before carrying the electric tools:
Warning: 1 you putyour ingerson the switch o cay & power tolafter turing on the switch twil cause serious accidents.
e) Before starting the power tool, make sure that each accessory you need is firmly locked in place, otherwise, it may cause personal injury.
f) Do not extend the chain saw 100 far during operation, and always maintain the correct footing, control the chain saw on a fixed, firm, and horizontal surface. Slides or unstable surfaces (such as ladders) may cause the chain saw to lose  balance or control, resulling in personal injury.
g) When the chain saw is working. all parts of the body should be kept away from the saw chain. Before starting the chain saw, make sure that the saw chain is not touching anything. A ltle carelessness when operating the chain saw may  cause your clothes or other objects to be entangled in the chain, resulting in personal njury.
h) Always hold the handle of the chain saw with your right hand, ook for a support point with your left hand, or hold the handle of the chain saw with both hands, other operations wil increase the risk of personal injury.
i) When cutting is under tension, pay attention to the kickback of the chain saw. When the tension of cutling wood is released, the chain loaded by the chain saw may hit the operator or cause the chain saw to lose control.
j) Reasons for kickback and prevention: When the front end of the guide plate or the blade of the chain touches the object to be cut,ifitis closed during cutting or the saw chain is clamped by wood during cutting, kickback may ocour. In  some cases, the blade of the chain may cause a sudden reverse reaction when it touches the object to be cut, pushing the guide plate up and back towards the operator. Any of these reactions can cause you to lose control of the chain saw,  resuting in serious personal injury. Don’t rely solely on the safety devices builtinto the chain saw. As a chain saw user, you should take several steps to ensure that your cutling work does ot cause accidents or injuries. This can be avoided  by taking the following appropriate precautions:

1. Keep a firm grip, wrap your thumb and fingers around the chain saw handle, find a support point with your left hand, and position your body and arms [0 resist recoll. If proper precautions re taken, the recoil force can be controlled  by the operator.
2. Don’t overextend your arms, don’t exceed the height of your shouiders. This helps prevent accidents and enables better control of the chain sawin the event of an accident,
3. Only use guides and chains specified by the manufacturer. Incorrect guide plates and chains may cause the chain to break or kickback
4. Never start cutting from the tip of the wood
5. Start cutting while the chain is running
6. Always sharpen the blade of the chain correctly.
7. An appropriate amount of chain lubricant can be applied to the place where the chain is in direct contact with the guide plate
8. When pruning branches. take care to prevent the chain saw from contacting other branches.

k) Do not operate power tools in a flammable and explosive environment, such as an environment with flammable liquid, gas, or dust. Because the motor generates heat during high-speed operation, it may ignite dust or smoke and present an explosion hazard.
l) When operating power tools, keep children and bystanders away.
m) Do not expose power tools to rain or humid environment
n) If the switch cannot be opened and closed, do not use electric tools. Any power tool that cannot be controlled by a switch is ‘dangerous and must be repaired.
o) Waming: Please disconnect the battery pack of the power tool before making any adjustments, changing accessories or storing the power tool. This preventive safety measure reduces the risk of accidentally starting the power tool.
P) Be especialy careful when working on sloping ground; shaking tree trurks and branches consifutes a potential hazard
q) Clean the area to be cut, remove sand, stones. nails, wires, and other foreign objects. Foreign oblects can damage the guide .
Plato and the chain and may cause a risk of kickback:
r) Cut wood blocks individually, not in bundies or ples.
s) Chain saws cannot be used for commercial purposes
t) Dot not overioad the chain saw.
u) Keep the work area clean and wellt. Clutiered or dark areas can cause aceidents

1. Chain
2. Guide plate
3. Protective flap of chain
4. LD
5. Fixed protective cover of nut
6. Heat dissipation hole
7. Protective cover of main part
8. Starting switch
9. Forward and reverse switch button (three gears: toggle left – forward, toggle right – reverse, middle gear — lock)
10. Battery pack release button
11. Wireless battery base

Product list:

1 main part
1 x battery pack
1 x chargers
1 x chain
1 x guide plate
1 x protective flap of chain
1 x M socket wrench
1x cross screwdriver
1x instructions
1x strap
1 x lubricating oil

Operating manual of the wireless and brushless electric chain saw

Product specifications and parameters:

Product size: 6.1°4.517.1Inches /1551 15°435mm
Product weight: 2.76Pounds/1.25kg
Product material: Nylon, TPU, ABS (fireproof ), siicone
No-load current: <5A, working curren of printed circuit board = 70mA sleeping current = fmA.
Chain: 1/4.043’40E
Chain speed: 6M/S.
Guide plate size: 6 inch Plus
Battery pack: 20Ah
LED floodiight: 10LM
Input voltage: 21V 1A
USB output voltage: 5V/2.1A
Rated voliage: 21V
Rated power: 550W
Over-temperature protection: When the temperature exceeds 120°C, the brushless eleciric chain saw will automatically shut down and can continue to work after Gooling down.

Operation of the wireless and brushless electric chain saw:

Note: The battery pack s not ully charged when taken out of the carton, please fully charge it before using it.
warning: To reduce e sk of serious personal njury,please cisconnect the power and turm of the device before making adjusiments or disassembling/nsialling accessories
Danger: Unexpected sart may cause serious personal injury.

Installation accessories

1.1 Instal the protective flap of the chain
a. Cyiinder nuts and fastening screws are installed s shown n the figure (Figure A).
b. The end o the spring s inserted into the small hole of the main body as shown in the figure and then rotated 90° to fix it (Figure 8),
c. Tighten screws. (Figure C)
1.2 How to install the chain
1.2.1 Install the chain into the guide plate first, and the middle guide testh just it nto the guide groove of the guide plate (as shown in Figure D). When the chain saw is rotating forward, the chain rotates counterclockwise. Note: The  blade of the chain should be forward (Figure E).
Note: There is a screw device on the chain saw to adust the tightness of the chain (Figure F)
1.2.2 When installing the guide plate, please ensure that the screw for adjusting the tightness of the chain fits into the positioning adjustment hole at the end of the guide plate.
a After alignment and installation, (Figure 1)
1.3 How to adjust the tightness of chain
1.3.1 The adjustment standard is to it up the chain in the middle of the guide plate by hand, wilhout exposed guide teelh (Figure J).
1.3.2 When lightening s needed, please adjust the tightening scren (cross screwdiver) clackwise to ighien the chain. When Yo need o loosen f, adjust the ightening screw (oross screwdiiver) counterclockvise to oosen the chain.
NOTE: Screw for tightness adjustment(Figure K)
1.3.3 Note: The new chain will be stretched early in use. Please check and adjust to the proper tension frequently, because the loose chain is easy to derail, causing the chain and guide plate to wear out quickly.
1.3.4 The rightmost chain must be attached to the sprocket (Figure M). After installation, please check again.
1.4 Install the chain saw protective cover
1.4.1 Please install the accessories in order (Figure N).
1.4.2 Please tighten the M6 nut with a socket wrench, and then put on the nut to tighten the protective cover. Without a socket wrench, the nut tightening protective cover can also be used temporarily. (Figure O)
Warning: Insert the bty pack only ator the product s fully instaled, and make sure that overy accessory you need is firmly locked in place. Otherwise, it may cause personal injury. (Figure P)

Installing and removing the battery pack.

Note: For best results, please make sure that the battery pack is fully charged, find the battery pack, press the battery pack power button, and see if it shows full power.

a) Install the battery pack on the bottom of the electric chain saw, align the battery pack with the guide rails in the battery port of the electric chain saw, press the release button, and then slide it into the port (as shown in Figure R) until  the battery pack is firmly locked It’s tight, and you can hear a “click” to ensure that the wireless battery pack will not come off. (Figure S).
b) To remove the wireless battery pack from the electric chain saw, press the release button, and then forcefully pull the battery pack out of the tool handle.
Note: The electric chain saw will not charge the battery while it is working .

Power on and how to use

3.1) After the power is turned on, the LED light on the chain saw will temporarily light up. When the equipment is not running, the electric chain saw will enter sleep mode after 2 minutes.
3.2) If you need to use it, please make sure that all accessories are firmly locked in place and the battery pack is locked before starting the chain saw.
3.3) Before turning on the chain saw switch, the chain saw forward and reverse switch button has three gears: toggle left-forward (figure T), move right- reverse (figure U), middle gear- Locked (Figure V), the default is the middle gear- locked state (Figure V). The normal use state is: toggle to the left- forward (Figure T).

3.4) Note: When the chain is stuck in the middle of the wood during use, the reverse mode can be activated to make the chain saw separate from the stuck object.
3.5) Note: The chain saw start switch has its own speed regulation and automatic braking functions, which can better protect the personal safety of the operator.

1. Autobrake: Press the starting switch, the chain saw will work immediately. Release the switch completely, the chain saw will stop immediately.
2. Speed adjustment: According to the strength of the operator pressing the start switch, the running speed of the chain saw is controlled. The lighter the pressing force, the slower the chain saw runs, and the heavier the pressure, the  faster the chain saw running speed. (Figure W)

Note: One key to wake up the battery pack: Press the battery pack power button to display the power level of the wireless\ battery pack. (Figure Y)

1. Check the real-time power.

2. Activate the USB output to supply power to other electronic products. Output voltage: 5V 2.1A
   

3. Batery capacity display level o the wireless batery base:
   Battery Capacity
   Display Level| Remaining Capacity| Current Voltage| Current State of Indicator Lamps| Remark
   ---|---|---|---|---
   <25%| <16.5V| One lamp flashes| Please Charge
   25%| 165-17.5V| | Please Charge
   50%| 17.6-18.5V| | Please Charge
   75%| 18.6-19V| | Can be charged
   100%| >19V| | Full energy

4. When the charger detects that the battery packis oo hot or 00 cold, it will automaically start the hot/cold group delay and suspend charging unti the battery pack reaches an appropriate temperature, the charger wil automaticaly  switch 1o the charging mode. This function ensures the maximum service lfe of the battery pack

5. Longest lfe and best performance can be obtained if the battery pack s charged when the air temperature is between 65 °F and 75 °F (18 °~ 24 °C). DO NOT charge when the battery pack is below +40 °F (+4.5 °C), or above +104 °F  (+40 C).
   This s important and will prevent serious damage 1o the battery pack

6. The charger and battery pack may becorme warm to the touch while charging. This is a normal condition, and does ot indicate a problem

7. To faciltate the cooling of the wireless battery base, please avoid putting the charger or the wireless battery base in a warm or wet environment

Storage recommendations of electric chainsaw

1. It is best to store the electric chain saw in a cool and dry place, away from direct sunlight and overheating or cold.
2. In order to ensure the service life of the equipment and prevent its degradation, please store it in a fully charged state
3. When not in use, charge and discharge the battery. Do not turn on the power switch when storing.
4. If the product is not used for a long term, please fully charge the battery pack every 3 months to ensure the maximum service life of the battery pack.
5. Store idle power tools out of the reach of children. Do not let people who are unfamiliar with power tools or those who are not familiar with these instructions operate power tools. Power tools are dangerous in the hands of untrained  users.

Cleaning and maintenance of brushless electric chain saw

1. The charger and wireless battery pack are not repairable
2. Keep knives sharp and clean correctly. Before any maintenance or cleaning of the power tool, please remove the battery from the power tool and store the battery in a safe place. Wear hand protection when touching the chain blades.  Touching the blade with bare hands increases the risk of injury.
3. It must be cleaned and maintained regularly. Check whether the moving parts are misaligned or blocked, whether the parts are broken, and any other conditions that may affect the operation of the power tool. If damaged, repair the  power tool before  use. Many accidents are caused by poorly maintained power tools. This ensures the long-term reliable operation of the power tool.
4. Clean the chain carefully after each use. Wipe the chain with lubricating oil and spray it with a metal protective spray.
5. After continuous operation, please remove the dust and other debris on the electric chain saw.

MANUFACTURER:
SHENZHEN CHENGUO TECHNOLOGY GO, LTD
6. YIKANG BUSINESS BUILDING, 33 HUARONG ROAD,
DALANG STREET, LONGHUA DISTRICT, SHENZHEN,
‘GUANG DONG, CHINA.
MADE IN CHINA
Model:AD 806

If you have any questions or comments of this or any
AUTDER t0ol, please contact us.
Let’s Stay in Touch.
Support Email: AUTDER2020@outiook.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>