AUTDER XC0008 wireless portable Air compressor Instruction Manual
- June 5, 2024
- AUTDER
Table of Contents
AUTDER XC0008 wireless portable Air compressor
INTRODUCTION
Thank you for buying our “wireless handheld pump” which can inflate automobile tires quickly and easily. The pump also has the automatic stop function which enables the pump to stop working after reaching the tire pressure you need. And the pump is provided with additional accessories for various purposes. This product is applicable for automobiles, motorcycles, bicycles, electric vehicles, balls, and small inflatable toys. Wireless handheld pump It can also be used for checking the tire pressure gauge. Please be sure to read this manual before use and abide by all the instructions strictly. In addition, please keep the manual properly for future reference.
Packing List
- 1 x l7re pump
- 1 x Lithium battery holder
- 2x Air hose
- 1 x Gift box
- 1 x Handheld zipper bag
- 1 x User manual
- 1 X USB cable
- 2x Conical nozzle
- 1 inflation nozzle
- 4x Tire cover
- 1 x Switching valve
- 1 cigarette lighter socket (no battery version)
Technical Parameters
- Product Model: FC-368
- Product Name: Wireless digital display pump
- Input Voltage: DC 12.6v
- Working Voltage: DC 10.8v
- Maximum Current: <9A
- Battery Capacity: 260OMa
- LED Light: 8LM
- Pressure Precision: +1.5%PSI
- Flow Rate: 35,OLPM@Opsi.
- Maximum Inflation Pressure: 120PSI
- Pressure Unit: PSI, Bar, Kpa, KG/CM?
- Note: 1 PSl=0.0689476bar=6.894757kPa=0.7 kg/CM
- Length Of Power Cable (without battery package): 4m+10mm
- Working Environment Temperature: -20C-50 C/ -4 P -122 F
- Voltage Detection: The real-time voltage of the current battery can be displayed by pressing “+” and “-” at the same time.
- Installation Speed: In the case of a built-in battery fully charged, it takes about 2min for a bicycle to be inflated, about 3min for a motorcycle, and about 6min for 195/60/R14 tire of an automobile.
Battery Indicator
Charge The Battery
- Take the battery out from the wireless handheld air pump: Pull out the battery cover while pressing the battery unit button.
- Users can find the USB cable, insert the USB port into the USB charger and connect the other end of the USB cable to the charger port of the battery.
- During battery charging, the LED indicator will be red. After the battery is full of electricity, the LED indicator on the charger will turn blue. It takes 8-5h for charging the battery fully.
Battery Connection And Disassembly:
- Please ensure that the outside of the wireless handheld air pump is clean.
- Before connecting the air pump, the battery should be dry. Users should insert the battery into the base of the wireless handheld air pump and push the battery until it is stuck firmly.
- Users should press the battery unit button before taking the battery out, and then remove the battery from the base of the wireless handheld air pump.
Service Period:
- When using the wireless handheld pump outdoors, please ensure that no sand has entered the ventilating grill.
- Please ensure that the wireless handheld air pump connects to the inflating article correctly and only uses the provided air hose and accessories.
- Please be sure to check the maximum pressure of articles before inflation.
Use Of Cigarette Lighter Adapter:
- Untie the cable before use of the adapter.
- If you have installed the lithium battery unit, please take it out at first, and then insert the cigarette lighter adapter base into the wireless handheld pump until a “click” sound is heard, and finally insert the other end of the cigarette lighter adapter into the interface of the cigarette lighter of the automobile.
- Please start the automobile before using the adapter.
Safety Precautions
Warning
- Children are forbidden to use the air pump! Please place the air pump in a place that cannot be accessed by children.
- Please do not insert the air pump into the mouth, ear, or eye of human beings or animals. Please do not play with the air pump as a toy.
- Please do not use the air plump in environments nearby Tlammabie and explosive fluids and gases (e.g. petrol station).
- During inflation, high-pressure gases will generate heat. lo ensure well the operation, after the air pump, runs for a consecutive 16min, the ar pump should stop working for 15-2Omin to make the air pump cool down before it is reused to prolong its service life.
- If there Is any abnormal sound or the temperature is too high during dilation, please tum oft the machine to make it cool down for at least Consecutive 1bmin,
- After the pump is used, the initiation hose and the Connector may be very hot, so please do not be scalded when disassembling the hose,
- When using the product, please protect it from rain, water, falling, or impact
- If the product is not used for a long time, it must be saved in a dry place. It is suggested that it should be changed every 3-6 months,
- Please be sure that the air pump has been fully charged before use please charge it only using the attained charger or cable,
- Please clean the housing with a soft cloth after every time of use.
- Please abide by all the safety instructions and clean the product regularly to extend the service life of the product
- Please disconnect the extemal charger on thunderstorm days to prevent damage to the product from thunder strikes. lease keep the product away from the heat source and keep good ventilation, do not place the product in a sign-temperature environment or throw it into the fire, in case of exploSIon. Please pay attention to water tightness during storage, transportation, and operation.
EU-REPRESENTATIVE
BellaCooool GmbH
- ADD: PETTENKOFERSTRABE 18,10247, BERLIN, GERMANY
MANUFACTURER
- SHENZHEN CHENG TECHNOLOGY CO. LTD
- 6F, YIKANG BUSINESS BUILDING, 33 HUARONG ROAD, DALANG STREET, LONGHUA DISTRICT, SHENZHEN.
- GUANG DONG, CHINA.
- MADE IN CHINA
- Model: FC-368
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>