ANKER A1271 Power Bank User Guide

: June 14, 2024
: Anker

Table of Contents

Using Your Power Core
Specifications
IMPORTANT SAFETY INSTRUCTIONS
FCC Statement
IC Statement
Customer Service
Read User Manual Online (PDF format)
Download This Manual (PDF format)

ANKER A1271 Power Bank User Guide

Using Your Power Core

Check the power level
Charge your phone or tablet
No Lightning cable included.
Recharge your Power Core

When your Power Core is fully charged, the LED indicators will turn off.

To give your Power Core the fastest, safest recharge, use an Anker® USB charger.

Specifications

Capacity: 20100 mAh/72.36 Wh
Input: 5V-2A
Output: 5 V-4.8 A
Size: 168 x 62 x 22 mm/6.5 x 2.4 × 0.9 in KG
Weight: 359 g/12.7 oz

IMPORTANT SAFETY INSTRUCTIONS

When using this product, basic precautions should always be followed, including the following.

Store product in a cool and dry place.
Do not store the product in hot or humid environment,
Use of a power supply or charger not recommended or sold. by the product manufacturer may result in a risk of fire or injury to persons,
Operating temperature should be between O C to 35 C
Do not disassemble the product. Take it to a qualified service person when service or repair is required, Incorrect reassembly may result in a risk of fire or injury to persons.
If the product is not used for long periods of time, you should change and discharge once every three months,
When charging a device, the product may feel warm, this is a normal operating condition and should not be cause for concern.
In normal conditions, the battery performance will decline over several years,
Do not dispose of the product in heat or fire.
Do not clean the product with harmful chemicals or detergents.
Misuse, dropping or excessive force may cause product damage.
When disposing of secondary cells or batteries, keep cells on batteries of different electrochemical systems separate from each other. Before disposal, cover the battery connector with electrical insulating tape.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation,

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation, This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna,
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio / TV technician for help.

The following importer is the responsible party

Company Name: Fantasia Trading LLC
Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764
Telephone: 1-800-988-7973

IC Statement

When using this product, basic precautions should always be followed, including the following:
This device complies with Industry Canada license-ICES-003. Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device.

Declaration of Conformity Hereby , Anker Innovations Limited declares that this product is in compliance with Directives 2014/35/EU, 2014/30/EU & 2011/65/EU, The full text of the EU declaration of conformity is available at the following internet address:
https://www.anker.com

GB Declaration of Conformity Hereby,

Anker Innovations Limited declares that this product is in compliance with Electromagnetic Compatibility Regulations 2016

& The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012. The full text of the GB declaration of conformity is available at the following internet address: https://www.anker.com.

Anker Innovations Deutschland GmbH | Georg-Muche-Strasse
3, 80807 Munich, Germany
Anker Technology (UK) Limited | GNR8, 49 Clarendon Road, Watford, Hertfordshire, WD17 1HP, United Kingdom Anker Innovations Limited Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong

CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS (when product contain battery)