NEO TOOLS 90-060 Electric Ceramic Heater Instruction Manual

June 12, 2024
NEO TOOLS

NEO TOOLS logo

NEO TOOLS 90-060 Electric Ceramic Heater

NEO TOOLS 90-060 Electric Ceramic Heater

NOTE: BEFORE THE EQUIPMENT IS USED FOR THE FIRST TIME, READ THIS INSTRUCTION MANUAL AND KEEP IT FOR FUTURE REFERENCE. PEOPLE WHO HAVE NOT READ THIS INSTRUCTION SHOULD NOT ASSEMBLE, LIGHT, ADJUST OR OPERATE THE UNIT

DETAILED SAFETY REGULATIONS

ATTENTION! Read carefully-The infrared heater is designed for safe operation. Nevertheless, installation, maintenance and operation of the heater can be dangerous. Observing the following procedures will reduce the risk of fire, electric shock, injury to person and keep installation time to a minimums.

  1. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
  2. WARNING: In order to avoid overheating, do not cover the heater.
  3. Children of less than 3 years should be kept away unless continuously supervised.
  4. Children aged from 3 years and less than 8 years shall only switch on/off the appliance provided that it has been placed or installed in its intended normal operating position and they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children aged from 3 years and less than 8 years shall not plug in, regulate and clean the appliance or perform user maintenance.
  5. CAUTION-some parts of this product can become very hot and cause burns. Particular attention has to be given where children and vulnerable people are present.

Introduction

  1. Depending on the power cord type this fan heater may be used only in household, warehouses and workshops, building sites or greenhouses depending. It incorporates a thermostat and a self-resetting thermal cut-out to control the heating elements. The thermostat feels the air temperature and controls the surrounding temperature. The fan motor is controlled by thermostat and it stops working when the thermostat cuts off the heating element. The self-resetting thermal cut-out will switch off the heater to ensure the safety when overheating.
  2. When using the heater for the first time, you may notice a slight emission of smoke. This is quite normal and it stops after a short time.

Technical specifications

Model 90-060 90-061
Waterproof of Class NA NA
Voltage 220-240V~ 220-240V~
required power 2000W 3000W
current 8.3-9.1A 12.5-13.6A
Setting 20/1000/2000W 7/2000/3000W
Manual reset Thermostat 65°C 65°C
Product meast (mm) 210×130×260 234×130×284
N.W.(KG) 1.45 1.47
  1. Housing of steel plate and coated by heat-resistant powder .
  2. Supplied complete with cord and plug .

Description of Control Panel

NEO TOOLS 90-060 Electric Ceramic Heater 1

Left Knob : selector with heat setting

NEO TOOLS 90-060 Electric Ceramic Heater 2

Right Knob : Thermostat dial

Special safety regulations

  1. Before use, please check the marking on the power cord. Depending on the power cord type this appliance may be used in different ambient conditions:
    Type| You can use the appliance in| Do not use in
    ---|---|---
    H05VV-F| household, warehouses and workshops, building sites or greenhouses| building sites or greenhouses
    H07RN-F| household, warehouses and workshops, building sites or greenhouses|
    H05RN-F| household, warehouses and workshops or greenhouses| building sites
    H05RR-F| household, warehouses and workshops| building sites or greenhouses

  2. When using electrical appliance basic precautions should always be followed including below:

  3. The fan heater is not suitable for use outdoors in damp weather, in bathrooms or in other wet or damp environments.

  4. Please note that the fan heater can become very hot and should, therefore, be placed at a safe distance from flammable objects such as furniture, curtains and similar.

  5. Do not cover the fan heater.

  6. The fan heater must not be located immediately below a socket outlet.

  7. Do not connect the fan heater using an on/off timer or other equipment which can automatically switch the device on.

  8. The fan heater must not be placed in rooms where flammable liquids or gases are used or stored.

  9. If an extension cord is used, it must be as short as possible and always be fully extended.

  10. You must not connect other appliances to the same mains socket as the fan heater.

  11. Do not use this fan heater in the immediate surroundings of a bath, a shower or a swimming pool.

  12. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

  13. Make sure heater is always under surveillance and keep children and animals away from it;

  14. Do not place the appliance on moving vehicles or some where easy to be tipped over.

  15. When you don’t use the appliance for a long time, unplug the appliance. Don’t leave the heater for a considerable amount of time when in use.
    Pull the plug straight out, never remove the plug by pulling on the cord.

  16. Keep the heater far from curtain or places where the air inlet can easily be blocked.

  17. The power coupler is waterproof when not in use. In order to prevent possible electric shock or leakage current ,never use the appliance with wet hand or operate the appliance when there is water on the power cord.

  18. Do not dispose of electrical appliances as unsorted municipal waste, use separate collection facilities. Contact you local government for information regarding the collection systems available. If electrical appliance are disposed of in landfills or dumps, hazardous substances can leak into the groundwater and get into the food chain, damaging your health and well-being.

  19. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

  20. Children should be supervised to ensure that they do not play with the appliance.

Using Instructions

  1. Position the fan heater so that it stands upright on a firm surface and at a safe distance from wet environments and flammable objects.
  2. Connect the fan heater to the mains.
  3. Set the thermostat knob to the MAX and let the heater operate with full power.
  4. The fan heater will switch on when the heating selector is set to one of the power settings.
  5. Once the room reaches the required temperature, heating element will stop working. Once the temperature decreased, the heating element will be working. The fan heater now starts and stops automatically and thus keeps the room temperature constant.
  6. Before switch off the heater, please turn the thermostat to MIN position and turn the switch to fan position, let the appliance cool down for two minutes then turn off the heater and pull out the plug.

Cleaning and Maintenance

  1. Before cleaning the appliance, disconnect it from the socket and let it cool down. The enclosure is easily to get dirty, wipe it often with soft sponge.
    For every dirty parts, wipe with a sponge dipped in <50°C water and mild detergent, then dry the heater enclosure with clean cloth. Be careful not to let the water enter the appliance inner. Don’t splash water onto the heater, never use solvent like gasoline etc. to clean the heater, in order to protect the enclosure.

  2. Clean the cord and plug, dry and pack it in a plastic bag.

  3. When you store the heater, let it cool down first, keep it dry. Then cover it with a plastic bag, put in a packing box and store it in a dry, ventilated place.

Trouble shooting

You can solve many common problems easily, saving you the cost of a possible service call. Try the suggestions below to see if you can solve the problem before calling the service center.

Problem Possible cause Treatment

The heater does not operate, even when    it is plugged in and the switch, thermostat are switched on.| The plug is loose, bad connection| Pull out the plug, check the connection of the plug and

socket. Then connect again.

No power in socket outlet Insert the plug in a| proper socket
The appliance didn’t heat up, or only

ventilator worked

| The switch was not put at heating setting| Turn the switch to heat setting

The thermostat operated

| Turn the thermostat and listen if there is open/close voice. If there is no click and the thermostat is not damaged, the heater will automatic switch on when the appliance cooled down

Manual reset cut-out operated

| Turn the heater off and inspect the blockage of inlet or outlet. Disconnect the plug and wait at least 10

minutes for the protection system to reset before attempting to restart the heater.

Abnormal noise| The appliance is not stands upright| Put the heater on a level surface

Disposal
Waste electrical production should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or retailer for recycling advice.

Environmental Protection

Modelidentifier(s):90-060

Item| Symbol| Value| Unit| Item| Unit
Heat output| Type of heat input, for electric storage local space heaters only (select one)
Nominalheat output| Pnom2.0k| WManualh| eat char| ge control withintegratedthermostat [yes]|
Minimumheat output

(indicative)

| Pmin| 1.1| kW| Manualheat charge control with roomand/or outdoor

temperaturefeedback

| [no]
Maximumcontinuous heat

output

| Pmax| 2.0| kW| Electronic heat charge control with roomand/or outdoor

temperaturefeedback

| [no]
Auxiliary electricity consumption| Fanassistedheat output| [no]
At nominal heat output| elmaxN/A| kW             Typ| e of he| at output/room temperature control (select one)
---|---|---|---|---
At minimum heat output| elminN/A| kW             Si| n| gle stage heat outputandno room temperature control| [no]
In standby modeelSBN/AW| Two or mor| e manual st| a| ges, no room temperature control| [no]
 |  |  |  | With mechanic thermostat room temperature control| [yes]
 |  |  |  | With electronic room temperature control| [no]
 |  |  |  | Electronic room temperature control plusdaytimer| [no]
 |  |  |  | Electronic room temperature control plus week timer| [no]
 |  |  |  | Other control options (multiple selections possible)
 |  |  |  | Room temperature control, with presencedetection[no]|
 |  |  |  | Room temperature control, with openwindow detection[no]|
 |  |  |  | Withdistancecontrol option| [no]
 |  |  |  | Withadaptivestart control| [no]
 |  |  |  | With working time limitation| [no]
 |  |  |  | With black bulb sensor| [no]
Contact details:| Grupa TopexS p.zo. o. S p. k. Ul.Po graniczna2/4,02-285Warszawa
Remark:

For electric local space heaters, themeasured seasonal space heating energy efficiencyηscannot be worse than the declared value at

the nominal heat output of the unit.

Modelidentifier (s):90-061

Item| Symbol| Value| Unit| Item| Unit
Heat output| Type of heat input, for electric storage local space heaters only (select one)
Nominalheat

output

| Pnom3.0kWMa| nualheat char| ge control with| integratedthermostat [yes]|
Minimumheat output (indicative)| Pmin2.0kW|  |  | Manualheat charge control with roomand/or outdoor

temperaturefeedback

| [no]
Maximum

continuous heat output

| ****

Pmax3.0kW

|  |  | Electronic heat charge control with roomand/or outdoor

temperaturefeedback

| **** [no]
Auxiliary electricity consumption| Fanassistedheat output| [no]
At nominal heat output| elmaxN/AkW| Type o| f heatoutput/r| oomtemperature control (select one)
At minimum heat output| elminN/AkW| Single| stage heat ou| tputandno room temperature control [no]|
In standby modeelSB| N/AW| Two or more| manual sta| ges, no room temperature control| [no]
 |  |  |  | With mechanic thermostat room temperature control| [yes]
 |  |  |  | With electronic room temperature control| [no]
 |  |  |  | Electronic room temperature control plusda y timer| [no]
 |  |  |  | Electronic room temperature control plus week timer| [no]
 |  |  |  | Other control options (multiple selections possible)
 |  |  |  | Room temperature control, with presencedetection[no]|
 |  |  |  | Room temperature control, with openwindow detection| [no]
 |  |  |  | Withdistancecontrol option| [no]
 |  |  |  | Withada ptivestart control| [no]
 |  |  |  | With working time limitation| [no]
 |  |  |  | With black bulb sensor| [no]
Contactdetails:Grupa| TopexSp.zo. o. Sp. k. Ul.Pograniczna2/4,02-285Warszawa
Remark:

For electric local space heaters, themeasuredseasonal space heating energy efficiencyηscannot be worse than thedeclared valueat the nominal heat output of theunit.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals