NOYAFA JMS16-V1 Air Monitor User Manual

VER:V1
User Manual

Overview

This device can detect carbon dioxide, PM2.5, TVOC, formaldehyde & temperature and humidity, Can store inspection data for 24 hours or even 30 days, and supports Chinese and English. Pls download
Tuya APP, you can view the real-time detection data of the device through the Tuya APP.

Interface button description

Product Function illustrate

1. HCHO Testing
   Equipped with the principle of semiconductor gas sensor.
   Turn on for 30S to test, the range is 0~9.999mg/m3, and the accuracy is 0.001mg/m3.

2. CO, Testing
   Equipped with non-dispersive infrared (NDIR) principle.
   Turn on the device for 1808S to test, the range is 400~5000ppm, and the accuracy is 1ppm.

3. PM2.5 Testing
   Equipped with Mie scattering principle can detect the dust particles in the air. Turn on the device for 180S to test.
   The range is 0~1000ug/m’, and the accuracy is lug/m3.

4. TVOC Detection
   Equipped with the principle of semiconductor gas sensor.
   Turn on for 1208S to test, the range is 0~9.999mg/m’, and the accuracy is 0.001mg/m’.

5. Testing Result Illustration
   The results showed: super high concentration, high concentration, slightly high concentration, good and excellent.

Operation Instructions

1. On/ Off
   When the power is more than 10%, long press the side button to turn on or turn off.

2. Calibration
   Place the device in a ventilated place indoors and outdoors, click on the “About” interface, click the “Calibrate” button, and the device will beep immediately after the calibration.
   After 10S, the device calibration is finished.

3. Air Testing
   Air testing can be performed after turn on § minutes.

4. Touch Screen Instructions
   Swipe left and right to switch between different interface displays, and tap the corresponding selected item to enter the corresponding interface setting and switching.

Parameter Description

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>