RODE STREAMERX Audio Interface and Video Streaming Console User Guide

RODE STREAMERX Audio Interface and Video Streaming Console

FRONT PANEL

1. Mic volume control/source selector

2. Headphone volume control/mute button

3. Mic mute button

4. Video cut button

5. Phantom power/mic input indicators

6. Four SMART pads with bank switch buttons
   BACK PANEL

7. Power input

8. USB inputs

9. HDMI thru

10. HDMI in

11. 3.5mm headphone output

12. ¼-inch headphone output

13. Neutrik® combo jack

14. P48 phantom power on/off

POWERING THE UNIT ON AND OFF

• To turn the unit on, simply connect to a power source (SV, 3A required) using the included power supply or by connecting to a computer using the included USB cable
• To turn the unit off, simply disconnect it from the power source

CONNECTING A MICROPHONE AND HEADPHONES

• Plug any XLR microphone into the Neutrik® combo jack at the back of the unit
• If your microphone requires phantom power, press the P48 switch on the back of the unit
• Press the mic gain control to select the analog input as the audio source (LED will turn purple)
• Connect headphones to the ¼-inch or 3.5mm input on the back of the unit (note: ensure mic level is down before connecting headphones to avoid sudden loud noises
• Ensure mic and headphones are turned up to a comfortable level before recording

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>