RODE NT1 Studio Condenser Microphone Instruction Manual
- May 15, 2024
- Rode
Table of Contents
RODE NT1 Studio Condenser Microphone
Specifications
Acoustic & Electrical Specifications
- Acoustic Principle: Pressure gradient
- Active Electronics: JFET impedance converter with bipolar output buffer
- Capsule: 1.00
- Polar Pattern: Cardioid
- Address Type: Side
- Frequency Range: 20Hz – 20kHz
- Output Impedance: 100
- Maximum SPL: 142 dB SPL
- Equivalent Noise (A-Weighted): 4dBA
- Sensitivity: -32 dB re 1 Volt/Pascal (25 mV @ 94 dB SPL) +/- 2 dB @ 1 kHz
- Analogue Power Requirements: Via XLR: P48
- Analogue Output Connection: 3-pin XLR
Digital Specifications
- Digital Power Requirements: Via USB: 5V
- Digital Output Connection: USB-C
- Bit Depth: 24-bit / 32-bit floating point
- Sampling Rate (kHz): 48 / 96 / 192
- Processing: APHEX digital signal processing (only available at 48kHz sample rate)
- Minimum OS Requirements: Windows 10, Mac OS 10.15
Mechanical Specifications
- Weight (grams): 308g
- Dimensions (millimetres): Length: 52mm, Width: 52mm, Height: 189mm
- Included Accessories: Check rode.com for details
Product Usage Instructions
Connecting the Microphone
To connect the microphone, use the provided XLR cable or USB-C cable depending on your preferred connectivity. Ensure the device you are connecting to meets the minimum OS requirements.
Setting Up Analog Connection
If using the XLR connection, make sure to provide phantom power (P48) to the microphone. Connect the XLR cable to the microphone’s output and your recording device’s input.
Setting Up Digital Connection
If opting for USB connection, plug the USB-C cable into the microphone and your computer. Make sure the sampling rate and bit depth are configured correctly in your recording software.
Frequently Asked Questions
Q: What is the warranty period for this product?
A: The product comes with a 10-year warranty. For further details, refer to the warranty information provided.
Q: What is the polar pattern of this microphone?
A: The microphone has a cardioid polar pattern.
Q: What are the minimum operating system requirements for digital connection?
A: The minimum OS requirements for digital connection are Windows 10 and Mac OS 10.15.
The NT1 5th Generation fuses the classic sound signature of the legendary RØDE NT1 with cutting-edge, next-generation technology. It features RØDE’s groundbreaking Dual Connect output, offering both XLR and USB connectivity for connecting to an audio interface, mixer or console, and other audio equipment, or directly to a computer for plug-and-play recording. It features a professional-grade audio interface built in, with RØDE’s ultra-low-noise, high-gain Revolution Preamp™, high-resolution (up to 192kHz) A/D conversion, and advanced digital signal processing for recording pristine, studio-quality audio. It also features a 32-bit float digital output for recording everything from a whisper to the loudest drummer with no chance of clipping and no need to set complex gain controls. These revolutionary features complement the warm silky character, extended frequency response, extremely low self-noise, and high SPL handling that the NT1 is renowned for, making the NT1 5th Generation the ultimate studio microphone for a wide variety of recording applications. up to the max SPL handling capability of the microphone
- Large-diaphragm (1-inch) gold-sputtered condenser capsule
- Extended frequency response
- Exceptionally low self-noise (4dBA)
- High sensitivity and high SPL handling
- Dual Connect output – XLR and USB connectivity
- Ultra-low-noise, high-gain Revolution Preamp™
- 32-bit float digital output
- High-resolution (192kHz) A/D conversion
- On-board DSP for advanced APHEX® audio processing, including a compressor, noise gate, high-pass filter, and Aural Exciter™ and Big Bottom™ effects
- Studio-grade shock mount and pop filter, XLR and USB cables included
- Available in black and silver
- Designed and made in RØDE’s precision manufacturing facilities in Sydney, Australia
ACOUSTIC & ELECTRICAL SPECIFICATIONS
ACOUSTIC & ELECTRICAL SPECIFICATIONS
Acoustic Principle: Pressure gradient
Active Electronics:| JFET impedance converter with bipolar output buffer
Capsule:| 1.00”
Polar Pattern:| Cardioid
Address Type:| Side
Frequency Range:| 20Hz – 20kHz
Output Impedance:| 100Ω
Maximum SPL:| 142 dB SPL
Equivalent Noise (A-Weighted):| 4dBA
Sensitivity:| -32 dB re 1 Volt/Pascal (25 mV @ 94 dB SPL) +/- 2 dB
@ 1 kHz
Analogue Power Requirements:| Via XLR: P48
Analogue Output 3-pin XLR
Connection:
DIGITAL SPECIFICATIONS
Digital Power Via USB: 5V
Requirements:
Digital Output Connection:| USB-C
Bit Depth:| 24-bit / 32-bit floating point
Sampling Rate (kHz):| 48 / 96 / 192
Processing:| APHEX digital signal processing (only available at 48kHz sample
rate)
Minimum OS Requirements:| Windows 10
Mac OS 10.15
MECHANICAL SPECIFICATIONS
MECHANICAL SPECIFICATIONS
Weight (grams): 308
Dimensions Length: 52
(millimetres): Width: 52
Height: 189
Included Accessories: • SM6 Shock mount &
pop filter
• SC29 – 3m USB-C Cable
• 6m XLR Cable
• Dust Cover
RØDE Software RØDE Central
Compatibility: RØDE Connect RØDE UNIFY
POLAR PATTERN
FREQUENCY RESPONSE
