RODE Pro II Digital Audio Mixer User Guide

: June 1, 2024
: Rode

Table of Contents

RODE Pro II Digital Audio Mixer
QUICK START GUIDE
RADIATION EXPOSURE STATEMENT
EU COMPLIANCE STATEMENT
POWER SUPPLY UNIT SPECIFICATIONS:
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

RODE Pro II Digital Audio Mixer

Specifications

Inputs: XLR
Outputs: 1/4-inch
Controls: Faders, Knobs
Compliance: FCC Part 15, ICES-003

Product Usage Instructions

Connect your microphones to the XLR inputs on the rear.
Adjust the corresponding faders to increase or decrease the input level.
Connect your headphones to the 1/4-inch outputs on the rear.
Adjust the corresponding knobs to increase or decrease the headphone volume.

German

No specific instructions provided.

QUICK START GUIDE

Connect the included power supply to your RØDECaster Pro II, press the adjacent red power button and follow the start-up walkthrough
Connect your microphones to the XLR inputs on the rear and adjust the corresponding faders to increase or decrease input level
Connect your headphones to the 1/4-inch outputs on the rear and adjust the corresponding knobs to increase or decrease headphone volume
View the online user guide for more information on how to master your RØDECaster Pro II

Download RØDE Central to customise SMART Pads, transfer recordings, configure settings and update firmware for your RØDECaster Pro II: rode.com/apps/rode- central

The device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

This device may not cause harmful interference, and
This device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of more of the following measures:

Reorient or relocate the receiving antenna
increase the separation between the equipment and receiver
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
Consult the dealer or an experienced radio/TV technician for help

This equipment complies with FCC radiation exposure limits set forth in an uncontrolled environment.
Changes or modifications not expressly approved by RØDE could void the user’s authority to operate the equipment.

For USA: The frequency stability of all transmission frequencies of U-NII-1, U-NII 2A, U- NII 2C and U-NII-3 meets the requirements of 47 CFR FCC Part15.407(g), and the manufacturer declares that their transmission is maintained at Band U-NII-1, U-NII 2A, U-NII 2C and U-NII-3.

For Canada: The frequency stability of all transmission frequencies of U-NII-1, U-NII
2A, U- NII 2C and U-NII-3 meets the 47 CFR FCC Part15.407(g) requirements, and the manufacturer states that their transmissions remain within the U-NII-1, U-NII 2A, U-NII 2C and U-NII-3 bands.
Pour le Canada: La stabilité de fréquence de toutes les fréquences de transmission de U- NII-1, U-NII 2A, U-NII 2C et U-NII-3 est conforme aux exigences 47 CFR FCC Part15.407(g), et le fabricant déclare que leurs transmissions restent dans les bandes U-NII-1, U-NII 2A, U-NII 2C et U- NII-3.

CAN ICES-3 (B) / NMB-3 (B)
This Class B digital apparatus complies with Canadian ICES-003
(Cet appareil numérique de la Classe B conforme à la norme NMB-003 du Canada)
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:

This device may not cause interference
This device must accept any interference, including interference that may cause undesired operation of the device.

RADIATION EXPOSURE STATEMENT

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment shall be installed and operated with minimum distance 20cm between the radiator & body.

Radio Frequency Exposure Statement for Canada
The device has been evaluated to meet general RF exposure requirements. The device can be used in mobile exposure conditions. The minimum separation distance is 20cm.

EU COMPLIANCE STATEMENT

Operating Frequency Range	The maximum RF Output Power
Bluetooth 2402-2480 MHz	3.68 dBm (BR/EDR)

4.59 dBm (BLE) EIRP

CAUTION
The RØDECaster Pro II has been designed to be used with the provided power supply, as use the provided power supply only.

Stop using the power supply unit and any cables if:

There is any damage to the charging port, power connector or power cord
The power supply unit is exposed to excessive moisture, or liquids is spilled into the power supply unit
The power supply unit enclosure is broken