Rode EPRN432O Wireless PRO User Guide
- May 15, 2024
- Rode
Table of Contents
- Rode EPRN432O Wireless PRO
- Product Information
- Product Usage Instructions
- FAQs
- Getting Started with the Wireless PRO
- Pairing Your Wireless PRO
- Battery and Charging
- Connecting an External Microphone
- Using the Windshields
- Routing Modes
- Split Mode
- Manual Input Gain
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Rode EPRN432O Wireless PRO
Product Information
Specifications
- Product Name: Wireless PRO
- Compact microphone system
- Professional features for pristine audio recording
- Rechargeable lithium-ion battery
- USB C Connector for charging
- Included smart charging case for convenience
- 7 hours of battery life when fully charged
Product Usage Instructions
Getting Started
To begin using your Wireless PRO microphone system, follow these steps:
- Turn on the Wireless PRO by pressing the power button.
- Ensure the transmitters and receiver are paired automatically or manually.
- If manual pairing is required, follow the instructions provided in the manual.
Turning on Your Wireless PRO
To turn on the Wireless PRO, press the power button located on the device.
Understanding and Navigating the Display
The Wireless PRO receiver features an LCD display for critical information display and settings navigation:
- Use the Left and Right Navigation buttons for navigation.
- Short-press for quick navigation and long-press for more options.
Pairing Your Wireless PRO
Pairing your Wireless PRO transmitters and receiver:
- Power on the devices for automatic pairing.
- If manual pairing is needed, follow the manual pairing instructions provided.
Battery and Charging
The Wireless PRO system comes with rechargeable batteries and a smart charging case:
- Each unit can be individually charged via USB C port.
- For convenience, use the included smart charging case for extended use.
- Ensure correct placement of units in the case for charging.
FAQs
- Q: How long does the battery last when fully charged?
- A: The battery provides up to 7 hours of continuous use when fully charged.
- Q: What should I do if I encounter a USB Accessories Disabled error message?
- A: If you see this error, switch to using a standard SC22 USB C cable instead of the SuperSpeed SC34 cable to resolve the issue.
2/20/24, 9:57 AM
EN US
Wireless PRO | USER GUIDE & SUPPORT | RØDE 0
Wireless PRO / USER GUIDE & SUPPORT
USER GUIDE & SUPPORT
The Wireless PRO is the most powerful compact microphone system ever, packed
full of professional features that offer ultimate flexibility when recording
pristine audio for your content. Discover everything you need to know about
using your Wireless PRO here.
Contents
Features
Receiver RX
https://rode.com/en-us/user-guides/wireless-pro
1/41
2/20/24, 9:57 AM
EN US
Wireless PRO | USER GUIDE & SUPPORT | RØDE 0
Wireless PRO / USER GUIDE & SUPPORT
1 LCD Display 2 USB C Connector 3 3.5mm TRRS Connector 4 Ø Button 5 Left Navigation Button 6 Right Navigation Button 7 Routing Mode Selector
Transmitter TX
1 Connectivity Indicator LED
https://rode.com/en-us/user-guides/wireless-pro
2/41
2/20/24, 9:57 AM
Wireless PRO | USER GUIDE & SUPPORT | RØDE
EN2 URSecording Status LED
0
3 Battery Indicator LED
Wireless PRO / USER GUIDE & SUPPORT
4 USB C Connector
5 Ø Button
6 Locking a 3.5mm TRS Input
7 In-built Microphone
8 Record Button
Getting Started with the Wireless PRO
The Wireless PRO comes with everything you need to record broadcast-grade wireless audio, including a smart charging case, pair of lavalier microphones, windshields, magnetic clips and all necessary cables for plugging into your devices. The system itself consists of a pair of transmitters and a single receiver. Each transmitter picks up audio via its built-in microphone, or an external mic such as a lavalier, which can be connected via the 3.5mm input. This audio is transmitted wirelessly to the receiver unit, which connects to your camera, smartphone, computer or other recording device either via USB or its 3.5mm output. Audio can also be recorded directly to the transmitters, giving you maximum flexibility.
Turning on Your Wireless PRO
Each transmitter and receiver unit features a Ø’ button that functions as the power button as well as performing various other functions. Simply long-press this button to power on or power off your units. By default, the Wireless PRO transmitters will automatically power down after 15 minutes if they are unpaired and not recording, but this can be disabled via RØDE Central with the Timeout’ toggle. The receiver does not power down automatically.
https://rode.com/en-us/user-guides/wireless-pro
3/41
2/20/24, 9:57 AM
EN US
Wireless PRO | USER GUIDE & SUPPORT | RØDE 0
USER GUIDE & SUPPORT
Understanding and Navigating the Display
The Wireless PRO receiver features an LCD display that shows you critical
information about your audio levels, connectivity, recording status and more.
It also allows you to navigate the system’s various settings. To navigate
these options, you use the Left and Right Navigation buttons on the receiver,
either with a short-press (less than 1 second) or long-press 1 second or
more).
These three buttons will perform different functions depending on which screen
you are currently on, but they correspond to the on-screen symbols and
settings that are physically closest to them for quick identification. For
instance, when in the output gain adjustment screen, the Left Navigation
button lowers the gain level as it is closest to the on-screen ’ symbol, while the Right Navigation button raises it as it is closest to the+’
symbol.
https://rode.com/en-us/user-guides/wireless-pro
4/41
2/20/24, 9:57 AM
EN US
Wireless PRO | USER GUIDE & SUPPORT | RØDE 0
Wireless PRO / USER GUIDE & SUPPORT
Pairing Your Wireless PRO
When you first power on your Wireless PRO, the transmitters and receiver will
automatically pair. You can also manually pair them if required.
Manual Pairing
With all your units powered on, short-press the Right Navigation button on the
receiver to cycle to the first transmitter screen and then long-press the
Right Navigation button to enter pairing mode the display will read “PAIR TX
NOW”. Shortpress the Ø button on one of your transmitters to enter pairing
mode the pairing LED on the transmitter will start quickly flashing blue
until it turns solid blue when successfully paired. Navigate to the next
transmitter page on the receiver with a short-press of the Right Navigation
button and repeat the process for your second transmitter.
To unpair a transmitter, short-press the Right Navigation button on the
receiver to cycle to the desired transmitter screen and then long-press the
Right Navigation button.
Note: You will need to manually re-pair the transmitter after doing this.
Pairing in RØDE Central
With your Wireless PRO receiver connected to a computer running RØDE Central
(learn more about RØDE Central here), you can see if transmitters are
currently paired to your receiver in the top-right section of the app. If a
transmitter isn’t paired, turn it on, short-press its Ø button, and then click
`pair’ in the app. Here, you can also unpair your transmitters.
https://rode.com/en-us/user-guides/wireless-pro
5/41
2/20/24, 9:57 AM
Wireless PRO | USER GUIDE & SUPPORT | RØDE
EN US
0
Wireless PRO / USER GUIDE & SUPPORT
Battery and Charging
The receiver and transmitters each contain a rechargeable lithium-ion battery capable of up to seven 7 hours of use when fully charged. You can charge each transmitter and receiver individually via the unit’s USB C port using computer or other USB charging device, but it’s much more convenient to use the included smart charging case.
Charge Case
The included charge case can store more than two full recharges for the whole
system (two transmitters and one receiver) for extended use. To recharge your
Wireless PRO, simply place all three units in the case, ensuring the receiver
is placed in the slot marked `RX’ and that the USB C port for each unit lines
up with the USB C connections in the case.
When the charging case isn’t connected to power, its LED will be solid blue
when the case is charging any of the units placed inside of it. Pressing the
button next to the LED will display the internal battery’s status. This will
be solid green when it has a healthy charge, amber when low, red when very
low, and flashing red when critical. If the charging case runs out of battery,
you can top it up while simultaneously charging your mounted transmitters and
receivers by connecting the case to a power source via USB C.
https://rode.com/en-us/user-guides/wireless-pro
6/41
2/20/24, 9:57 AM
Wireless PRO | USER GUIDE & SUPPORT | RØDE
EN US
0
Wireless PRO / USER GUIDE & SUPPORT
Note: When the charge case is connected to certain computers (including some
Intel-based MacBooks) you may see an error
message that says “USB Accessories Disabled. Unplug the accessory using too
much power to re-enable USB devices”. This is
because these computers are not compatible with simultaneous high-speed data
transfer and fast charging. If you see this error, use the standard SC22 USB C
cable instead of the SuperSpeed SC34 cable.
Battery Level Indicators
The display on the Wireless PRO receiver will show you the battery level of
each transmitter as well as the receiver itself, on the left of the home
screen. Each transmitter features a dedicated battery level LED indicator.
When the battery is getting low, this LED will change from green to amber, and
from amber to red when it is very low. The LED will flash red when the battery
level is critical. When charging, this LED will flash green until it turns
solid green when fully charged.
https://rode.com/en-us/user-guides/wireless-pro
7/41
2/20/24, 9:57 AM
EN US
Wireless PRO | USER GUIDE & SUPPORT | RØDE 0
Wireless PRO / USER GUIDE & SUPPORT
Attaching or Mounting Your Wireless PRO
Both the Wireless PRO’s transmitters and receiver feature an integrated clip.
These can be used to attach the transmitter units to clothing and other items,
and slot the receiver into the cold shoe mount of a camera or similar device
to firmly secure it in place.
MagClip GO
The Wireless PRO comes with two MagClip GO accessories included in the box,
one for each transmitter. You can use this attachment for more flexibility
when attaching a Wireless PRO transmitter to clothing. Simply slide the
MagClip GO clip (the larger component) over the Wireless PRO clip to attach
it, place the transmitter where you wish on clothing, and use the magnet
(smaller component) on the other side of the clothing to secure it in place.
You can also use the MagClip GO to attach the receiver unit to magnetic
surfaces, such as MagSafe-equipped iPhones.
https://rode.com/en-us/user-guides/wireless-pro
8/41
2/20/24, 9:57 AM
Wireless PRO | USER GUIDE & SUPPORT | RØDE
EN US
0
Wireless PRO / USER GUIDE & SUPPORT
Connecting an External Microphone
Alongside the built-in microphones, the Wireless PRO transmitters also feature
3.5mm inputs for connecting external microphones such as the included Lavalier
II microphones and RØDE VideoMics. When you connect an external microphone, it
will replace the built-in mic as the input source.
Locking Connectors
The 3.5mm inputs on the two transmitters feature locking threads for
microphones that feature locking connectors, such as the included Lavalier II.
This allows you to securely attach your microphone so it can’t be accidentally
unplugged while in use. Simply insert the microphone’s 3.5mm jack then twist
the golden locking ring clockwise to secure the cable in place. Reverse the
process to disconnect.
VideoMics and Other 3.5mm Audio Sources
You can connect any microphone or audio source that features a 3.5mm TRS
output to the Wireless PRO, including oncamera shotgun microphones such as the
VideoMic NTG. Plug-in power will be provided if needed.
https://rode.com/en-us/user-guides/wireless-pro
9/41
2/20/24, 9:57 AM
Wireless PRO | USER GUIDE & SUPPORT | RØDE
EN US
0
Wireless PRO / USER GUIDE & SUPPORT
Connecting Your Wireless PRO to a Camera
You can connect the Wireless PRO’s receiver via the 3.5mm TRS output using the
included TRS to TRS cable, or via USB using the included USB C to USB C cable,
if your camera has a USB audio input. Simply connect one end of the cable into
the Wireless PRO receiver and the other end to your camera’s audio input.
If you are using the 3.5mm output, first ensure the output gain mode is set to
Manual’, which is the default setting. To do this, press the Right Navigation button until you cycle through to the Gain Mode screen, and then press the Left Navigation button to cycle through the options until you haveManual’
(indicated by the level’ icon). You can also use theCamera Preset’ gain
mode (indicated by the camera icon) see the `Camera Preset’ section for more
information.
Plug-in Power Detect
By default, the Wireless PRO receiver will automatically power on or off when
the camera it’s connected to also powers on or off, as long as the receiver
detects power. You can disable this setting via RØDE Central.
https://rode.com/en-us/user-guides/wireless-pro
10/41
2/20/24, 9:57 AM
EN US
Wireless PRO | USER GUIDE & SUPPORT | RØDE 0
Wireless PRO / USER GUIDE & SUPPORT
Connecting Your Wireless PRO to a Smartphone
To connect the Wireless PRO to a smartphone or tablet, connect the receiver
using the included USB C to Lightning cable or USB C to USB C cable, depending
on what connection type your device has.
https://rode.com/en-us/user-guides/wireless-pro
11/41
2/20/24, 9:57 AM
EN US
Wireless PRO | USER GUIDE & SUPPORT | RØDE 0
Wireless PRO / USER GUIDE & SUPPORT
Connecting Your Wireless PRO to a Computer
You can also connect the Wireless PRO to a computer and use it as a wireless
audio interface. To do this, simply connect the receiver to your computer’s
USB port using the supplied USB C to USB C cable, then go to your audio
settings and select “Wireless PRO RX” as your input device. You will also need
to do the same in any audio software you are using. If your computer only
features a USB A port, use a USB C to USB A cable like the SC18.
Connecting to a computer is also how you export on-board recordings from the
transmitters, adjust settings, and charge the units. To do this, place both
transmitters and the receiver into the charge case and use the included
SuperSpeed USB C cable to connect the case to your computer. This will allow
for the fastest possible transfer rates and will charge your case and Wireless
PRO units. See the Configuring Wireless PRO with RØDE Central’ andOn-Board
Recording and 32-bit Float’ sections for more information.
Note: Simultaneous use of the 3.5mm analog and USB C digital outputs is not
recommended depending on which
devices you’re recording to and how they are powered, a ground loop may occur
that can produce digital noise in your signal.
https://rode.com/en-us/user-guides/wireless-pro
12/41
2/20/24, 9:57 AM
Wireless PRO | USER GUIDE & SUPPORT | RØDE
EN US
0
Wireless PRO / USER GUIDE & SUPPORT
Connecting Headphones or Headsets to the Receiver
The 3.5mm TRRS connection on the Wireless PRO receiver is super versatile and
able to connect to a number of different audio input and output devices, such
as headphones and microphones.
When the 3.5mm output is not being used to connect the receiver to a camera
(such as when you’re using the USB C output or only using the transmitters’
on-board recording function), you can connect headphones like the NTH 100 for
monitoring your audio, or a headset like the NTH 100M. Connecting a headset
allows you to both monitor your audio as well as record your voice via the
headset microphone for more information on how this third channel of audio
RX Mic) is routed, please see the Audio Routing’ section. Before plugging your headphones or headset into the receiver, ensure the output gain mode is set to either “Headphones” or “Headset”. To do this, press the Right Navigation button until you cycle through to the Gain Mode screen, and then press the Left Navigation button to cycle through the options until you have eitherheadphones’ or `headset’ displayed, and then press the Right
Navigation button to select the mode. Once selected, you can adjust the
headphone output level by pressing the Left Navigation button from the
Wireless PRO’s home screen, and then use the Left and Right Navigation buttons
to adjust the volume.
Note: The Wireless PRO features a high-power headphone amplifier with enough
output for high-impedance headphones
that require a lot of volume.
https://rode.com/en-us/user-guides/wireless-pro
13/41
2/20/24, 9:57 AM
Wireless PRO | USER GUIDE & SUPPORT | RØDE
EN US
0
Wireless PRO / USER GUIDE & SUPPORT
Using the Windshields
The Wireless PRO’s transmitters feature high-quality in-built omnidirectional
condenser microphones. These are sensitive microphones that are designed to
pick up sound from all around in great detail. When recording outdoors or in
windy environments, it’s recommended you use the supplied furry windshields to
help protect the capsules and reduce any wind or background noise in your
recording.
The Wireless PRO comes with three furry windshields. These have been designed
to ensure an extremely strong connection and will not fall off your
transmitters, even with vigorous use. To attach them securely, align the two
white dots on the windshield with the black dots on the transmitter, then push
the windshield down and twist to lock it in place. Reverse the process to
remove them.
https://rode.com/en-us/user-guides/wireless-pro
14/41
2/20/24, 9:57 AM
Wireless PRO | USER GUIDE & SUPPORT | RØDE
EN US
0
Wireless PRO / USER GUIDE & SUPPORT
Routing Modes
The Wireless PRO is capable of recording three different audio sources at the
same time two transmitters, and a headset mic RX Mic). The receiver outputs
a stereo signal from both its USB C and 3.5mm connections, giving you two
discrete audio channels to work with, and these can be routed to the output in
a number of different ways.
Note: The routing menu is also where you will see timecode configuration
options. This is covered in depth in our ‘Using
Timecode with the Wireless PRO’ section.
Merged, Split and Safety Channel Modes
By default, the Wireless PRO will be in Merged mode. To switch between Merged
and Split mode, press and hold both the Left and Right Navigation buttons at
the same time to enter the routing menu. Here you can cycle through the
available modes by short-pressing the Left Navigation button and select your
desired mode with the Right Navigation button.
Merged Mode
https://rode.com/en-us/user-guides/wireless-pro
15/41
2/20/24, 9:57 AM
Wireless PRO | USER GUIDE & SUPPORT | RØDE
InEMNeUrgSed mode, the two transmitters (and RX Mic, if it is being used) are combined into a single summed output. This is 0 great if you’re using the Wireless PRO in a live presentation setup, or only using one transmitter and want the audio to be WirelesrsePcRoOrde/d oUnStoERbGoUtIhDEc&haSUnPnPeOlsRTof your recording device.
Split Mode
In Split mode, each transmitter’s output is recorded onto separate channels (left and right) on the Wireless PRO’s output. This means each channel can be processed individually in post-production, which is great for two-person interviews and other recording scenarios where you need to be able to edit and mix each sound source independently. If you are using a headset microphone connected to the receiver’s 3.5mm connection RX Mic), the audio from the transmitters will be merged onto the output’s left channel and the RX Mic will be routed to the right channel. See the below table for more information on Split mode routing.
Safety Channel Mode
When Safety Channel mode is activated, the Wireless PRO will also output a
second channel of audio 10dB lower than the main channel. This is useful in
case your sound source gets very loud unexpectedly and your audio clips, as
having this second channel means you will have a clean backup of your
recording. The safety channel is indicated by the blue shield icon and is only
available in merged mode. When activated, all of your inputs (both
transmitters and RX Mic) will be merged to the left channel and the safety
channel will be output to the right channel.
https://rode.com/en-us/user-guides/wireless-pro
How Split Mode is Routed
16/41
2/20/24, 9:57 AM
Wireless PRO | USER GUIDE & SUPPORT | RØDE
WheEnNinUSSplit mode, the stereo Left/Right) output will be configured differently depending on which inputs are being used and 0 which transmitters are actively paired. Below is a table showing each possible output mode in Split mode, depending on which WireltersasnPsRmOitte/r TUXSE1RoGrUTIDXE2& SyUoPuPOhRaTve connected, as well as a headset or lavalier microphone connected to the receiver RX Mic).
Transmitters
RX Mic
Left Channel Output
Right Channel Output
2
No
TX1
TX2
2 1
Yes No
TX1 TX2 TX1 (if on)
RX Mic
TX2 (if on)
1
Yes
TX1 or TX2
RX Mic
0
Yes
None
RX Mic
Adjusting Gain Modes and Gain Levels
The Wireless PRO receiver’s 3.5mm output is incredibly flexible and able to
connect to a number of different devices. To allow for this, there are several
different gain modes available, and these modes will affect how you set your
gain levels.
Gain Modes
To change modes, press the Right Navigation button until you’re on the Gain
Mode screen, press the Left Navigation button to cycle through the options,
and press the Right Navigation button to select your preference. The different
gain modes are:
Manual
This is the default mode and is tailored to provide cameras and other similar
devices with the appropriate gain level to capture clear recordings at a
reasonable volume level. You can adjust this gain level in 3dB increments (see
the ‘Adjusting Output Gain Levels’ section for more information).
Camera Preset
With this mode selected, you can cycle between any of the camera presets you
have loaded into your Wireless PRO. For more information on loading camera
presets, see the ‘Configuring Camera Presets in RØDE Central’ section.
Headphones
The Wireless PRO receiver has a dedicated headphone amplifier that you can
activate by changing the gain mode to Headphones’. This increases the output level to be suitable for monitoring audio. Note: The headphones output gain level will default to a low value to ensure it’s always at a safe level for listening. You will likely need to increase the level to be able to hear your audio clearly. Headset Just like the headphones output, theHeadset’ gain mode utilises the
headphone amplifier, but also allows you to capture your headset microphone’s
audio.
You can plug any microphone, such as a lavalier, into the RX Mic input on the
receiver. However, as this is a TRRS connection, you must use a microphone
with a TRRS connector such as the SmartLav+, a TRS to TRRS adaptor such as the
SC4, or a TRS to TRRS cable as the SC7.
Note: You will need to use the USB output to record the headset microphone’s
audio, as the 3.5mm output is used to plug
in the headset. See the `Audio Routing’ section for more information on this
mode and how the RX Mic audio is routed.
https://rode.com/en-us/user-guides/wireless-pro
17/41
2/20/24, 9:57 AM
Wireless PRO | USER GUIDE & SUPPORT | RØDE
EN US
0
Wireless PRO / USER GUIDE & SUPPORT
Adjusting Output Gain Levels
You can increase or decrease the output gain of the receiver’s 3.5mm output in
the gain adjustment screen, allowing you to adjust the level of the audio
being sent to your camera, headset, headphones or other device.
To access the gain adjustment screen, press the Left Navigation button on the
receiver while on the home screen. When in this screen, the Left Navigation
button decreases the output gain level, while the Right Navigation button
increases it. If you’re in Camera Preset mode, the Left and Right Navigation
buttons will cycle through the different loaded camera presets.
Note: This gain adjustment doesn’t affect the Wireless PRO’s digital USB
output.
https://rode.com/en-us/user-guides/wireless-pro
18/41
2/20/24, 9:57 AM
EN US
Wireless PRO | USER GUIDE & SUPPORT | RØDE 0
Wireless PRO / USER GUIDE & SUPPORT
GainAssist and Input Gain
The Wireless PRO features intelligent GainAssist technology, which
automatically controls the microphone levels to ensure they are perfectly
balanced. There are two different GainAssist modes available, Auto and
Dynamic, and you can also turn it off to allow for granular control over your
input gain (see next section). Each transmitter’s input (whether it’s the
built-in mic or an external mic like the Lavalier II can have different modes
selected, as can the headset mic RX Mic).
Changing GainAssist Settings
To configure the GainAssist mode, press the Right Navigation button until you
arrive at the screen for the transmitter you wish to adjust. Short-press the
Left Navigation button to cycle between Auto and Dynamic modes, or long-press
it to toggle GainAssist on or off.
Auto
The Auto GainAssist mode will give you a smoother, more consistent sound,
which can be better in a recording scenario like an interview where your audio
levels are jumping around a lot.
Dynamic
https://rode.com/en-us/user-guides/wireless-pro
19/41
2/20/24, 9:57 AM
Wireless PRO | USER GUIDE & SUPPORT | RØDE
TEhNe DUySnamic GainAssist mode balances your audio while maintaining dynamics, resulting in a more “natural” sound. This 0 can be better in a controlled recording environment where the sound you’re recording is more even.
Wireless PRO / USER GUIDE & SUPPORT
Note: GainAssist does not apply to on-board recordings.
Manual Input Gain
If you have the GainAssist setting disabled for your transmitters or RX Mic,
you’re able to manually adjust the input gain for the built-in mic or
connected external mic.
To disable GainAssist, long-press the Left Navigation button when in your
desired transmitter screen until AUTO or DYNAMIC is replaced by a dB level. In
the same screen, you can set the input gain level by short-pressing the Left
Navigation button, and then adjusting the gain up or down (in 1dB increments)
with the Left and Right Navigation buttons.
https://rode.com/en-us/user-guides/wireless-pro
20/41
2/20/24, 9:57 AM
EN US
Wireless PRO | USER GUIDE & SUPPORT | RØDE 0
Wireless PRO / USER GUIDE & SUPPORT
Configuring Wireless PRO With RØDE Central
RØDE Central is an easy-to-use companion app for the Wireless PRO, available
on Mac and Windows for desktop and iOS and Android for mobile. It allows you
to configure all Wireless PRO settings, access on-board recordings (desktop
only), pair and unpair your transmitters and receiver, and update firmware.
Download Now
fi Con guring Routing Modes in RØDE Central
With your Wireless PRO receiver connected to your computer or phone, you can
select between all of the available routing modes (as well as timecode modes,
if enabled) by clicking the `Routing’ menu. See the ‘Routing Modes’ section
for more information.
https://rode.com/en-us/user-guides/wireless-pro
21/41
2/20/24, 9:57 AM
Wireless PRO | USER GUIDE & SUPPORT | RØDE
EN US
0
Wireless PRO / USER GUIDE & SUPPORT
fi Con guring Camera Presets in RØDE Central
In RØDE Central, you can select from a list of presets for a wide range a
popular camera models. These presets automatically set the gain levels of your
Wireless PRO’s output to best match the camera you’re using it with.
To access these presets, connect your Wireless PRO receiver to your computer
and open RØDE Central (desktop). Click Gain Mode’ and select ‘Preset’ with the camera icon. Now you can click the next button labelledPreset’, click
the +’ button, and select the manufacturer and model of camera you are using. On the next screen, you’ll find a link to a guide on setting up your camera’s audio settings for optimal use with the Wireless PRO. Once you’ve followed these instructions, clickAdd’ to load the preset onto your Wireless PRO.
Repeat the process to add other presets (up to 10 for any other cameras you’ll
be using with your Wireless PRO.
https://rode.com/en-us/user-guides/wireless-pro
22/41
2/20/24, 9:57 AM
EN US
Wireless PRO | USER GUIDE & SUPPORT | RØDE 0
WirelesSs PeROlec/tinUgSERaGC UIDaEm & SeUPrPaORPT reset on Your Receiver
With your camera presets loaded and your Wireless PRO in the Camera Preset
gain mode, you can cycle through your saved presets by pressing the Left
Navigation button on the receiver while on the home screen, and then using the
Left and Right Navigation buttons.
Along with any camera and custom presets you have saved, there will also be a ‘RØDE’ option that acts as a default preset. The gain level of this preset can be adjusted within the RØDE Central desktop app by clicking the three dots next to RØDE in the preset list.
Pro Tip
You can also create your own presets by selecting `Custom’ from the list of
manufacturers. Here, you’ll be able to give your preset a label (that will
show up on your Wireless PRO receiver display), set its gain level, and give
it a description for easy selection within RØDE Central.
fi Con guring Backlight and LED Dimming
https://rode.com/en-us/user-guides/wireless-pro
23/41
2/20/24, 9:57 AM
Wireless PRO | USER GUIDE & SUPPORT | RØDE
TEhNe WUiSreless PRO receiver’s screen features a backlight that you can set
to automatically dim after 10 seconds of inactivity. 0 To enable this, connect
your receiver to a computer or phone, open RØDE Central, then toggle the Dim Backlight)’ setting WirelestsoPRAOuto/’. ToUgSgElReGiUt
ItDoE`&OSffU’PtPoOdRTisable automatic dimming.
You can also adjust the transmitter’s LED brightness if you want a more
discreet aesthetic. With your transmitter(s) connected to a phone or computer
running RØDE Central, click the LEDs’ toggle to switch betweenBright’ and
`Dim’.
fi Con guring the Ø Button
Both the transmitters and receiver feature a Ø button, which when long-pressed
functions as a power on and off for that unit, but you can also configure each
button to perform a variety of short-press functions.
Receiver RX Marker places a marker in the on-board recordings of both
transmitters. Record starts or stops on-board recording for both
transmitters simultaneously.
Transmitter TX Marker places a marker in the on-board recording of just the
transmitter on which you press the button. Mute mutes the signal being sent
from the transmitter to the receiver (but doesn’t affect on-board recording).
Note: If a transmitter is unpaired, short-pressing the Ø button will enter
pairing mode.
https://rode.com/en-us/user-guides/wireless-pro
24/41
2/20/24, 9:57 AM
Wireless PRO | USER GUIDE & SUPPORT | RØDE
EN US
0
Wireless PRO / USER GUIDE & SUPPORT
High-Pass Filters
The Wireless PRO features a two-stage high-pass filter for each of its
transmitters. A high-pass filter, also known as a `lowcut’, removes lower
frequencies in an audio signal, which can be useful for adding clarity to your
audio and helping to tame any rumble caused by wind noise.
With your transmitter connected to RØDE Central, you can toggle the filter
between 75Hz, 100Hz and off for each transmitter. These filters apply to both
the transmitter’s in-built microphone and any connected external microphone,
such as the included Lavalier II.
https://rode.com/en-us/user-guides/wireless-pro
25/41
2/20/24, 9:57 AM
Wireless PRO | USER GUIDE & SUPPORT | RØDE
EN US Updating Wireless PRO Firmware with RØDE Central
0
WirelesTsoPRuOpda/te tUhSeERfiGrmUIDwEa&reSUoPnPOyRoTur Wireless PRO, place the receiver and both transmitters in the charge case, connect it to your computer or phone, and open RØDE Central. If a new firmware version is available for your Wireless PRO or the charge
case, you will be prompted to update. Simply click `Update All’ to begin the process and follow the prompts.
Note: The Wireless PRO transmitters and receiver will need to have at least
15% battery to initiate the update process. The
charge case firmware can’t be updated using the mobile version of Central.
On-Board Recording and 32-bit Float
Both of the Wireless PRO’s transmitters feature an on-board recording
function, each capable of recording over 40 hours of 32-bit float audio from
the in-built microphone or any external mic connected to its 3.5mm input. This
means that if your wireless signal momentarily drops out or your camera audio
clips, you’ll always have clean backup audio available. You could also use the
on-board recordings as your primary audio source if you prefer not to record
onto your camera.
Note: GainAssist does not apply to on-board recordings.
What is 32-bit Float Audio?
The Wireless PRO’s transmitters capture their on-board recordings in a 32-bit
float file format. Audio files with a 32-bit float bit depth are able to
represent a very wide range of volume levels without the issues that are
typically associated with recording very loud or quiet audio.
Your recording will not distort or clip when capturing loud sounds, even if it
goes above 0dB, and the 32-bit float format boasts incredible clarity to allow
you to boost quieter recordings in post-production without introducing noise.
This means you just get great audio every time, with no need to set the gain
or adjust settings.
Note: 32-bit float only applies to the Wireless PRO’s on-board recordings,
which means that these benefits won’t apply to
audio recorded onto your camera.
On-board Recording Modes
https://rode.com/en-us/user-guides/wireless-pro
26/41
2/20/24, 9:57 AM
Wireless PRO | USER GUIDE & SUPPORT | RØDE
TEhNereUaSre two different modes for recording on your Wireless PRO transmitters that you can configure using RØDE Central 0 Manual and Always.
Wireless PRO / USER GUIDE & SUPPORT
Manual: In this mode, on-board recordings are started and stopped when you
press the record button on the transmitter.
Always: In this mode, on-board recordings will always be running if the
transmitter is powered on, even if it’s not paired or
connected to a receiver.
You can also press the receiver’s Ø button to start and stop recording on your transmitters when it’s in ‘Record’ mode (see the ‘Configuring the Ø Button’ section for more information).
Note: For transmitters in ‘Manual’ recording mode, using the receiver’s Ø
button will start or stop recording, just as the
transmitter’s dedicated record button does. But for transmitters in ‘Always’
recording mode, pressing the receiver’s Ø button will start a new recording.
How to Export On-board Recordings
There are two methods for exporting your on-board recordings onto your
computer from your Wireless PRO transmitters. You can either quickly copy the
files from the transmitters (direct export) directly or use RØDE Central.
While it’s faster to directly export your recordings to your desktop, using
RØDE Central gives you access to placed markers along with a variety of export
options, such as the ability to normalise your audio and change its file
format, sample rate, bit depth and loudness.
https://rode.com/en-us/user-guides/wireless-pro
27/41
2/20/24, 9:57 AM
Wireless PRO | USER GUIDE & SUPPORT | RØDE
DEiNreUcSt WAV Export
0
WirelesTsoPReOxpo/rt rUeScEoRrdGiUnIDgEs&dSirUePcPtOlyR,Tstart by placing your Wireless PRO in its charge case and connecting the case to your computer using the included SuperSpeed USB C cable. Your Wireless PRO transmitter(s) will show up as a removeable
device on your computer, just as any other hard drive or USB storage device would. Here, you can quickly copy your recorded files to your computer.
Note: When exporting recordings using this method, your files will be saved in
their original 32-bit float WAV format (see
the `How to Adjust or Normalise 32-bit Float Files’ section for more
information).
Exporting On-board Recordings Using RØDE Central
To export recordings via RØDE Central, place your Wireless PRO in its charge
case and connect the case to your computer using the included SuperSpeed USB C
cable. Open RØDE Central and click on the transmitter TX from the left-hand
side that you wish to export audio from. Your recordings will be listed
chronologically in the left-hand column from newest to oldest.
Click on a recording and you’ll see its waveform data, as well as information
on any audio dropouts or markers (more on that shortly) in the timeline at the
top of the software. In the bottom-right corner you’ll see a number of export
settings for your selected recording(s), which you can adjust before clicking
the export button.
Note: See the `Batch Export and Export Selection’ section to learn how to
export multiple recordings or portions of
recordings simultaneously.
https://rode.com/en-us/user-guides/wireless-pro
28/41
2/20/24, 9:57 AM
Wireless PRO | USER GUIDE & SUPPORT | RØDE
EN US
0
Wireless PRO / USER GUIDE & SUPPORT
How to Adjust or Normalise 32-bit Float Files
Normalising audio is a process that adjusts the volume level of your entire
recording so that its loudest point sits at a particular volume level
(typically, at or below 0dB, to avoid clipping or distortion). Most editing
software can normalise your audio using an automatic function.
There are two ways you can normalise your 32-bit float audio files if the
audio is too quiet or has clipped: within RØDE Central or within your editing
software.
Using RØDE Central
When exporting using RØDE Central, select “Custom” from the first dropdown
menu in the export settings, and then choose “24 bits PCM” from the ‘Bit
Depth’ dropdown and then click `Export’ this will automatically normalise
your 32-bit float files and export them as 24-bit files, ready for use.
Using Your Editing Software
Whether you’ve directly copied your recordings from the Wireless PRO
transmitters or exported them as 32-bit float files from RØDE Central, you’ll
need to normalise them in your editing software. Once imported into your
software, you can simply adjust the volume of the audio clip or use your
software’s normalise function to raise or lower your recording’s volume.
32-bit Float Compatible Video and Audio Software
DaVinci Resolve Adobe Premiere Pro Final Cut Pro Reaper Ableton Live Adobe
Audition Audacity Pro Tools
https://rode.com/en-us/user-guides/wireless-pro
29/41
2/20/24, 9:57 AM
Wireless PRO | USER GUIDE & SUPPORT | RØDE
EN US
0
Wireless PRO / USER GUIDE & SUPPORT
Markers
The waveform will display any marker drops in the recording. These signify
user markers that you have manually dropped (green markers), dropouts (red
markers) and dropout regions (red sections). This is useful for pinpointing
exactly what section of audio you need to export.
If a recording includes any manually placed markers, it will have a dropdown
arrow beside the filename clicking this arrow shows each section as its own
`chapter’ allowing you to quickly navigate to, and select sections of your
larger file.
Markers: You can manually drop a marker in your recording at any time via the
receiver or transmitters (see the
‘Configuring the Ø Button’ section for more information). User markers are
displayed as green flags in RØDE Central. In addition to appearing in the
waveform, user markers are indexed in a drop-down menu under each recording.
Click a marker to jump to that section of the recording.
Dropouts: If the quality of the wireless signal between a transmitter and the
receiver falls below the acceptable range
during recording, a marker will be automatically dropped into the internal
recording to signify a signal dropout. These are displayed as red flags.
Dropout Regions: If several dropouts occur within 10 seconds of each other,
this will be displayed as a dropout region
rather than multiple marker lines clumped together.
https://rode.com/en-us/user-guides/wireless-pro
30/41
2/20/24, 9:57 AM
Wireless PRO | USER GUIDE & SUPPORT | RØDE
EN US
0
Wireless PRO / USER GUIDE & SUPPORT
Batch Export and Export Selection
In addition to being able to export individual recordings, you can export
multiple files simultaneously by checking the box next to any recording and
clicking Export Selection.’ You can also export a specific section of a recording by right-clicking and dragging the selection tool anywhere on the waveform to highlight the region you need, then clickingExport Selection’. You can also export a section
between two markers by clicking the dropdown arrow next to a recording that
contains markers, selecting one of its markers, and then clicking `Export
Selection’.
https://rode.com/en-us/user-guides/wireless-pro
31/41
2/20/24, 9:57 AM
Wireless PRO | USER GUIDE & SUPPORT | RØDE
DEeNleUtSing Your Recordings
0
WirelesWs PhReOn s/toraUgSeERinGUaIDtrEa&nSsUmPiPtOteRrTis full, new recordings will begin overwriting the oldest recordings. After a recording session, it’s a good idea to export all of your audio then delete the files from the Wireless PRO to ensure you don’t lose any audio you haven’t saved.
Clicking the transmitter settings cog in RØDE Central will allow you to see how much storage space you have left and mass delete all recordings on the transmitter.
Note: You cannot individually delete recordings.
Using Timecode with the Wireless PRO
Timecode is a media synchronisation system that is designed to perfectly
synchronise all your audio and video recordings. Not only does timecode save
you time in the editing process, especially when working on shoots using
multiple cameras and audio recorders, but it also becomes a single source of
truth for referencing specific scenes, moments or timestamps within your
project.
Timecode essentially works by labelling every clip with the exact time it
starts. These timings are frame-accurate, which means clips can be perfectly
aligned down to a fraction of a second, even if your devices started or
stopped recording at different times.
How Timecode Works with the Wireless PRO
The Wireless PRO uses the SMPTE Society of Motion Picture and Television
Engineers) timecode standard with LTC encoding Linear Timecode), which is the
most widely used format today. The Wireless PRO receiver acts as the Source’ in a timecode setup, meaning that timecode is generated by the Wireless PRO and is received by otherSync’ devices, such as cameras and audio recorders.
The Wireless PRO outputs timecode information as an audio signal. If your camera accepts timecode, it will record this data into your video files directly, but if it doesn’t then you can still record this audio timecode signal into your camera’s mic or aux input just like you would a microphone this audio is then later recognised as timecode in your editing software.
The Wireless PRO receiver RX will automatically send timecode to the transmitters TX , so the recordings on your transmitters will have timecode baked into them and be perfectly synchronised, but you need to record the timecode onto your camera(s) so that your video files also have this sync information.
https://rode.com/en-us/user-guides/wireless-pro
32/41
2/20/24, 9:57 AM
EN US
Wireless PRO | USER GUIDE & SUPPORT | RØDE 0
Wireless PRO / USER GUIDE & SUPPORT
Enabling Timecode
To enable timecode for your Wireless PRO, connect the receiver RX to your
computer or phone and open RØDE Central. In Central, click “Wireless PRO RX”
in the left-hand menu, toggle the Timecode’ setting on and click on the Timecode Modes’ menu. Here you’ll see a list of the available timecode modes
(explained in detail below) click the “Show Mode on Wireless PRO” toggle
(“Show on RX” on mobile) for any mode you wish to have access to on your
Wireless PRO system and then click Apply’. Once the timecode modes you wish to use have been added to your Wireless PRO, you can select them on the receiver by pressing-and-holding the Left and Right Navigation buttons, cycling through the modes with the Left Navigation button until your desired mode is displayed on-screen, and then pressing the Right Navigation button toset’ this mode.
Note: For the Wireless PRO to actively generate timecode, the receiver RX must
be powered on. If the receiver powers
off, unpairs, or falls out of range, the timecode on the transmitters will
continue to `free run’ until they detect the receiver once more, at which
point they’ll seamlessly re-sync. In order for the on-board recordings to
contain timecode information, timecode needs to first be enabled using RØDE
Central, and the recordings need to be started whilst the transmitters are
paired to the receiver.
https://rode.com/en-us/user-guides/wireless-pro
33/41
2/20/24, 9:57 AM
EN US
Wireless PRO | USER GUIDE & SUPPORT | RØDE 0
Wireless PRO / USER GUIDE & SUPPORT
Timecode Mode 1 (3.5mm and USB, Merged)
This is most likely the mode that will suit your setup. In Mode 1, the audio
signal from both transmitters will be summed and sent to the receiver output’s
left channel, and the timecode signal will be sent to the receiver output’s
right channel (via both the 3.5mm and USB outputs). This means your camera
will receive timecode information on the right channel and audio on the left
channel. Use this mode when recording timecode as audio to a camera or device
that doesn’t accept timecode.
Timecode Mode 2 (USB with Headset, Split)
https://rode.com/en-us/user-guides/wireless-pro
34/41
2/20/24, 9:57 AM
Wireless PRO | USER GUIDE & SUPPORT | RØDE
MEoNdeU2Sis for when you have a headset connected to the receiver’s 3.5mm TRRS output and you want to capture audio
0
from both transmitters and the headset microphone on separate channels. In this mode, the headset mic audio will be sent
WirelesvsiPaRUO SB/in tUhSeERleGfUtIDcEha&nSnUePlP,OaRnTd the right channel will contain the timecode information. Each transmitter will capture audio
as on-board recordings, and all three input sources will be summed and sent to the receiver’s 3.5mm output so you can
monitor all sources in your headset.
Timecode Mode 3 (USB with Headset, Merged)
Mode 3 works identically to Mode 2, except the audio sent to the left channel
of the USB output will be a summed output of all three microphones TX1, TX2
and your headset microphone) rather than just the headset microphone.
https://rode.com/en-us/user-guides/wireless-pro
35/41
2/20/24, 9:57 AM
Wireless PRO | USER GUIDE & SUPPORT | RØDE
EN US Timecode Mode 4 (USB with Headphones, Merged)
0
WirelesMs PoRdOe 4/is tUhSeERsaGmUIDeEa&sSMUPoPdOeRT3, except that it is optimised monitoring with headphones instead of a headset (i.e. there is no headset microphone input). The USB output contains a summed output from both transmitters TX1 and TX2 on the left channel, and the timecode information on the right channel. This leaves the receiver’s 3.5mm output available to connect headphones for monitoring your audio.
Timecode Mode 5 (Timecode Only / Jam Sync)
Mode 5 will exclusively send a timecode signal on both left and right
channels of both the USB and 3.5mm TRRS outputs on your receiver. Use this
mode with cameras or devices that accept timecode.
This mode also allows you to use the Wireless PRO as the source’ clock to sync multiple cameras or other equipment to each other. This is achieved by jam syncing’, which is the process of temporarily connecting the Wireless PRO
receiver to each of your devices in order to sync the internal timecode
generator of each device.
It’s worth noting that using the jam sync method can result in very minor
fluctuations in the synchronisation between your devices over time (referred
to as `drift’) as their internal generators aren’t perfectly matched. As such,
we recommend performing a jam sync about every four 4 hours, or whenever you
power cycle your cameras, to ensure accurate syncing.
Important Note: Mode 5 outputs a very loud timecode signal that complies with
the SMPTE standard, so it’s important that you don’t connect headphones to the
Wireless PRO receiver or monitor this signal via your camera while in this
mode. With that said, if your camera isn’t recognising the timecode signal
sent to it, try raising the output gain level on the Wireless PRO receiver
some cameras only detect very loud timecode signals.
https://rode.com/en-us/user-guides/wireless-pro
36/41
2/20/24, 9:57 AM
Wireless PRO | USER GUIDE & SUPPORT | RØDE
EN US
0
Wireless PRO / USER GUIDE & SUPPORT
Frame Rate
Before you record with timecode, it’s important to establish the frame rate
you’ll be shooting your project at and set the timecode to match it. This
forms the foundation for how your timecode keeps track of time, and if it
doesn’t match your footage, it will fall out of sync or fail to sync in the
first place.
If your selected frame rate is higher than those available in the below list,
select the option that divides perfectly into your project’s frame rate (e.g.
when shooting in 47.96fps, choose 23.98fps).
23.98 fps 24 fps 25 fps 29.97 DF Drop Frame)
29.97
30 fps
Note: Some cameras offer a 29.97 frame rate without specifying if it’s drop
frame in this case, check the camera’s
documentation to determine which format it is.
https://rode.com/en-us/user-guides/wireless-pro
37/41
2/20/24, 9:57 AM
EN US
Wireless PRO | USER GUIDE & SUPPORT | RØDE 0
Wireless PRO / USER GUIDE & SUPPORT
Real Time
You can choose to generate the Wireless PRO’s timecode in real time’ or as a continuous’ mode in which you select the start point. Real time mode reflects
the actual time in your region (determined by the Clock and Device Time’ section in RØDE Central) and will be displayed as 24-hour time with seconds and frames in the format HH MM SS FF. For instance, “14 34 42 12” represents 2 34pm, 42 seconds, and 12 frames. If you disable real time, the Wireless PRO’s timecode will instead start continuously counting up from a particular moment, which is established by hitting theReset’ button in RØDE Central.
Connecting Your Wireless PRO to a Device That Accepts Timecode
If your camera accepts timecode, it will be able to interpret the timecode
signal sent to it from the Wireless PRO and insert this information into your
recordings as metadata. For these cameras, use Timecode Mode 5 to ensure the
timecode signal is delivered loud and clear.
Many of these cameras feature dedicated timecode ports, in which case you will
need to use an adaptor to connect your Wireless PRO receiver’s 3.5mm output to
whichever proprietary format your camera uses. Be sure to use a high-quality
adaptor to avoid issues.
If your camera isn’t recognising the timecode signal sent to it, ensure your
Wireless PRO is running the latest firmware and is set to Timecode Mode 5, and
try raising the output gain level on the receiver.
We have created walkthrough guides (linked below) for a number of popular
cameras and devices that accept timecode natively. Any camera or device that
accepts the SMPTE standard format will work with the Wireless PRO
https://rode.com/en-us/user-guides/wireless-pro
38/41
2/20/24, 9:57 AM
Wireless PRO | USER GUIDE & SUPPORT | RØDE
EN US
0
Wireless PRO / USER GUIDE & SUPPORT
Arri Alexa Mini LF Arri Alexa 35 Blackmagic Ursa Mini Pro 12K Blackmagic Pocket Cinema Camera 4K Blackmagic Pocket Cinema Camera 6K Blackmagic Pocket 6K Pro Canon EOS R5 Canon EOS R5C Canon EOS C70 Canon EOS C300 Mk II Canon EOS C300 Mk III Canon EOS C500 Mk II Deity TC 1 RED KOMODO 6K RED KOMODO X Sony A7S III Sony FX3 Sony FX30
- These cameras don’t accept timecode but you can still follow the linked guide to record timecode information as audio.
https://rode.com/en-us/user-guides/wireless-pro
39/41
2/20/24, 9:57 AM
Wireless PRO | USER GUIDE & SUPPORT | RØDE
EN US Connecting Your Wireless PRO to a Device That Doesn’t Accept Timecode
0
WirelesIsfPyRoOur c/amUeSrEaRmGUoIdDeEl&dSoUePsPnO’RtTaccept timecode natively, such as the Sony A7s III, Canon EOS R5 or Panasonic Lumix GH5, you’ll need to record the timecode information as audio into its mic input, in the same way you would record any microphone audio.
For this, use the included SC2 3.5mm-to-3.5mm cable alongside Timecode Mode 1 on the Wireless PRO. If you’re recording audio via USB, to a smartphone for instance, use Timecode Mode 2, 3 or 4. You can view the below guides on how to synchronise your footage in post-production.
Syncing Your Video and Audio in Your Editing Software
The process for syncing your video and audio files in your editing software
will vary depending on whether your camera recognises timecode or not. If it
doesn’t, you’ll need to rely on editing software to interpret the audio
timecode information and apply it to the video file’s metadata. Unfortunately,
neither Premiere Pro nor Final Cut Pro can do this, so you’ll need to first
use software that does (we recommend DaVinci Resolve) to line up the files on
your timeline, and then bring this timeline data into your preferred software
we’ve prepared guides for these cases:
DaVinci Resolve https://rode.com/en-us/user-guides/wireless-pro
40/41
2/20/24, 9:57 AM
EN US
WirelesFs iPnRaOl C/ut PUrSoER GUIDE & SUPPORT
Premiere Pro
Wireless PRO | USER GUIDE & SUPPORT | RØDE
Download 0
Download
Download
A Note on Timecode Limitations
Cameras and other recording devices differ in how they handle internal video
and audio file synchronisation, as well as in how they accept timecode, and
this can have some consequences for timecode syncing.
While the Wireless PRO system is perfectly synchronised internally between the
receiver and transmitters, there’s a small chance that your video and audio
may be out of sync by a tiny amount depending on a wide range of variables in
the other equipment you’re using (this disparity could measure 1 or 2 frames
in extreme cases).
Even with this in mind, it is still significantly quicker to use timecode to
synchronise your files and then adjust them by a frame or two. We recommend
you record a clap that’s visible and audible on all of your video and audio
recording equipment. Once you’ve synchronised your files using timecode, this
can be used as a reference point for nudging your video or audio if it’s
needed.
Products
Microphones Headphones Interfaces and Mixers Accessories Apps Apparel
Support
Contact RØDE Service Centre Warranty Where to Buy Authorised Dealers
Company
About RØDE News and Info Job Opportunities
Account
Create Account
Subscribe to our latest news and offers
Subscribe
Privacy Policy | Terms & Conditions
© 2024 RØDE All Rights Reserved.
https://rode.com/en-us/user-guides/wireless-pro
41/41
References
- Audio & video pros (by RØDE)
- Login • Instagram
- RØDE Microphones | Premium Microphones & Audio Equipment
- Syncing the Deity TC-1 With Wireless PRO Timecode | RØDE
- Using Timecode on the Arri Alexa 35 and Mini LF With Wireless PRO | RØDE
- Using Timecode on the Blackmagic Pocket 4K, 6K and 6K Pro With Wireless PRO | RØDE
- Using Timecode on the Blackmagic Ursa Mini Pro 12K With Wireless PRO | RØDE
- Using Timecode on the Canon C300 Mark III and C500 Mark II With Wireless PRO | RØDE
- Using Timecode on the Canon C300 Mark II With Wireless PRO | RØDE
- Using Timecode on the Canon C70 With Wireless PRO | RØDE
- Using Timecode on the Canon EOS R5 With Wireless PRO | RØDE
- Using Timecode on the Canon EOS R5C With Wireless PRO | RØDE
- Using Timecode on the RED KOMODO 6K and KOMODO X With Wireless PRO | RØDE
- Using Timecode on the Sony A7S III With Wireless PRO | RØDE
- Using Timecode on the Sony FX3 and FX30 With Wireless PRO | RØDE
- RØDE SC18 | 1.5m USB-C to USB-A Cable | RØDE
- RØDE SC4 | 3.5mm TRS to TRRS Adaptor | RØDE
- RØDE SC7 | 3.5mm TRS to TRRS Patch Cable | RØDE
- MagClip GO | Magnetic Clip for Wireless GO | RØDE
- About RØDE | RØDE Microphones
- Job & Opportunities
- RØDE Microphones
- RØDE Microphones | Privacy Policy
- RØDE Microphones | Terms of Use
- Microphone Accessories | RØDE Microphones
- RØDE Audio Software | RØDE Microphones
- RØDE NTH-100 Professional Over-Ear Headphones
- Studio Interfaces and Mixers | RØDE Microphones
- Microphones | RØDE Microphones
- RØDE Authorised Dealers
- RØDE Microphones | Contact Us
- Where To Buy | RØDE Microphones
- Wireless PRO | USER GUIDE & SUPPORT | RØDE
- Wireless PRO | USER GUIDE & SUPPORT | RØDE
- NTH-100 | Professional Over-Ear Headphones | RØDE
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>