BEYONDOP MT00XH LED Desk Lamp User Manual

June 14, 2024
BEYONDOP

BEYONDOP MT00XH LED Desk Lamp

Introduction

  • Basic function: Interior lighting
  • Application: Bedroom. Study. Children’s room, etc.

Portable Lighting
Thank you for choosing this product. This desk lamp uses high-quality LED lamp beads, professional optical algorithms, and soft and comfortable lighting. and brings you a unique visual experience.

Parameter

Packing List

User’s Manual IPC, Lamp Body IPC, Lamp Base IPC, Power Adapter IPC, Accessories Package 1PC.

Product parts

Assemble

Insert the lamp pole into the lamp base, and insert the screw from the other side of the base. Tighten the screw with a screv/driver tool and the assembly is complete.

Function Description

Light-Off Delay
in the power on state, press a, the indicator light will be on the brightness of the main light will become the lowest, and the main Egfe will automatically turn off after 1 minute. Touch it again within 1 minute to cancel the let-ell delay mode, and the main light recurs to it are/nal beginners.

Human Body Sensor Switch
Touch it the indicator light will turn on, and the main light will automatically turn on when the person gradually approaches it for 1 second. Touch it again so cancel the function and the indicator left goes out.

Brightness Down

  • Touch once. Five levels of brightness reduction
  • Keep pressing Stepless dimming to the lowest brightness

Power Button

  • Touch once. Turn or/off the light.
  • Keep pressing: The indicator light is on.

Brightness Up

  • Touch once: Five levels of brightness increment
  • Keep pressing: Stepless dimming to the highest brightness

Lighting Mode
Touch it to switch between three color temperature cycles 3000K/4000K/5000K

Smart Lighting
Touch this key, the indicator light is on, and the smart light mode is enabled, the main line will automatically adjust the brightness according to the ambient light. Touch it again or touch other keys except to cancel the smart light mode.

Note:
This product function description is for reference only, please refer to the actual product. if you are still unclear, please contact us for consummation, thank you. service@beyondop.com.

Main Product Features

  1. The healthy and safe LED light source, passed the blue light harmless test.
  2. Diffuse reflection light-emitting structure, providing a comfortable lighting environment.
  3. High color rendering index, Ra: 95, CCT: 3000K/4000K/5000K.
  4. It is recommended to set the color temperature below 4000K for night use.
  5. The working state suitable for visual work is shown in the figure, the height between the light source and the workbench is 400mm, CCT: 4000K(Press this button to adjust the brightness to maximum)

Structural Rotation Diagram

  • Do not use on slopes greater than 6°
  • Angle of Rotation

Warning Map

  • Too much tilt angle may cause danger
  • Do not plug in with wet hands

Safety Warning

  • In order to prevent accidents such as lamp damage. falling, electric shock, fire, etc.. please install and use it in strict accordance with the instructions, and do not replace parts by non-professional persons.
  • Please use the power adapter included in the package or a matching, qualified adapter that meets the requirements of the rated voltage and current of the product.
  • Do not use this product in an unstable, flammable, or humid environment to avoid product damage, short-circuit, and fire accidents.
  • Do not use on slopes greater than 6°
  • Inspection and maintenance of lamps should be performed by professionals. Operation by non-professionals may cause danger.
  • Note: If the lamp does not work after connecting the power, please check whether the power switch is turned on.

Tips;

  • The surface will generate a certain amount of heat when the lamp is working. this is a normal phenomenon. The lamp has been strictly tested before leaving the factory. please use it with confidence.
  • In order to use this product safely and efficiently, please clean and inspect it regularly (once every six months). When cleaning the lamp. please cut off the power. use a soft wet cloth and then wipe it with a dry cloth. Do not clean with reagents, otherwise, it will cause discoloration or damage to the lamp.

Contact Information

Manufacturer: Zhongshan Ouliang Lighting Co. LTD

  • Address: 6th Floor, Activity Center, Building 13, Yingshui Yiju, No. 8, Jinjiang Road, Minzhong Street, Zhongshan. Guangdong. China.
  • Tel: +86 760 2383 8888
  • Web: www.beyondop.com.
  • Email: service@beyondop.com.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals