BEYONDOP B0BZYKBLQ4 LED Smart Bulb User Manual
- June 14, 2024
- BEYONDOP
Table of Contents
BEYONDOP B0BZYKBLQ4 LED Smart Bulb User Manual
Download and install the APP
Scan the QR code or search “Smart Life” in the APP Marketplace to download
and install the APP
Smart Life
https://smartapp.tuya.com/smartlife
Log in APP
There are 4 ways to log in to the Smart Life APP:
- Quick login: Click the “Quick Login” and Agree the “User Agreement and Privacy and Policy” to log in
- Try Now: Click the “Try Now” and “Continue” the tips to log in.
- Log in with Password: Click “Register” to sign up a new account with your mobile phone number & verification code,then you can log in with a verification code or a password you set.
- Sign in with your social media account.
Add Device
Before adding device in APP, please make sure that the bulb has been screwed
into the
lamp and the power is connected. Turn on the bulb for the first time, the
brightness of the bulb is in the gradient state, you can “Add Device” on the
APP.
- Click the “Add Device” button to turn on WiFi and Bluetooth. Please select 2.4GHz WiFi and enter the correct WiFi password.
- Wait for connection processing, and click “Done” after connection successfully
Note: Only WLAN 2.4GHz WiFi, Android™4.1 and iOS 8.0 and above are supported. 5G WiFi is not supported.
Tips
- At first, ensure that the Bluetooth and local network permissions of “SmartLife”APPare enabled. For the first time, only WiFi and Bluetooth can be used to connect to the bulb. The bulb state will be slow blinking or gradually changing, and then it will best eady on. (The connection process may take several minutes. Please be patient.)
- After the first successful connection between the Smart Life APP and the bulb,you can control the lamps anytime and anywhere in the new WiFi environment and mobile data traffic environment
Instruction for Use
After the APP is successfully connected to the bulb, click the bulb light
name on the APP interface to enter the operation interface. There are 4 menus
available at the bottom bar of the APP:
- Home menu: You can switch the lamp on and off, choose your preferred color, choose the color temperature under white light, bookmark your favorite color, and customize the brightness. ②Scene menu: Provides 8 lighting colors for common scenes
- Music menu: 3 music rhythm modes are provided. The lights will follow the rhythm of the music played by the microphone of the mobile phone.
- Setting menu: You can adjust the Schedule, Do not disturb, Default Light, Remote Control functions, the APP provides the corresponding instructions
Share Device
After logging in Smart Life APP, click the name of the bulb to enter the
operation interface, and click “… “in the upper right corner”, find “Share
Device” under the menu “others” and select “Add Sharing”. According to the
operation instructions in the APP, you can share this bulb with other accounts
to control the bulb. You only need to input a mobile phone number to share the
bulb, and the number of objects to share is not limited. However, only mobile
phone numbers registered with Smart Life APP can be shared. Third-party
registered accounts cannot connect to Amazon echo temporarily
Create Group
After entering Smart Life, click the name of the bulb to enter the operation
interface, and click “… “in the upper right corner, find “Create Group” under
others, and select multiple smart bulbs to create groups. The smart bulb
groups can be used for synchronization, color change, scene mode selection,
and timing. (Only the same type of bulb)
Connect with Amazon Echo and Google Home
It supports connecting with Amazon Alexa, Echo, Google Assistant and Google
Home with bulbs to control color, light brightness, and turn on / off
Note：
- 1.When connecting the bulb, please ensure that:
- The bulb is normally energized and the light is turned on;
- The mobile phone should be as close to the bulb as possible;
- If the bulb has connected to another phone, you can just reset it and connect it again.
- If multiple bulbs are controlled independently, the distance between bulb sand bulbs should be avoided to prevent signal interference.
- If the APP fails to connect the bulbs many times, the bulbs can be reset and connected again. The specific steps are as follows:
Turn the bulb off and on, then turn it off and on again, switch it on and off for 3times,and then turn it on again. The bulb will enter a gradual state, and the reset of the bulb has been completed at this time. (the interval between turning on and off the lamp is about 2 seconds.)
If you have any questions, please contact us: service@beyondop.com
Manufacturer: Zhongshan Ouliang Lighting Co., LTD
Address: 6th Floor, Activity Center, Building 13, Yingshui Yiju, No. 8,
JunjingRoad,Minzhong Street, Zhongshan , Guangdong , China
Tel: 86 755 8890 0979
Email: service@beyondop.com
Web: www.beyondop.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>