TELTONIKA FMM880 Simple Small Waterproof Tracker User Guide

TELTONIKA FMM880 Simple Small Waterproof Tracker

KNOW YOUR DEVICE

PINOUT

SET UP YOUR DEVICE

HOW TO INSERT MICRO-SIM CARD AND CONNECT THE BATTERY

1. UNSCREW SCREWS
   Unscrew 6 screws counterclockwise.

2. COVER REMOVAL
   Remove the cover.

3. MICRO-SIM CARD INSERT
   Insert Micro-SIM card as shown with PIN request disabled or read our Wiki how to enter it later with Teltonika Configurator1. Make sure that Micro-SIM card cut-off corner is pointing forward to slot. wiki.teltonika- gps.com/view/Teltonika_Configurator

4. BATTERY CONNECTION
   Connect the battery as shown to device. Position the battery in place where it does not obstruct other components.

5. ATTACHING COVER BACK
   After configuration, see “PC Connection (Windows)”, attach device cover back and screw in all screws.

6. DEVICE IS READY
   Device is ready to be mounted.

PC CONNECTION (WINDOWS)

1. Power-up FMM880 with DC voltage (10 – 30 V) power supply using supplied power cable. LED’s should start blinking, see “LED indications1”.
2. Connect device to computer using Micro-USB cable or Bluetooth connection:
   • Using Micro-USB cable
   • You will need to install USB drivers, see “How to install USB drivers (Windows)2”
   • Using Bluetooth
   • FMM880 Bluetooth is enabled by default. Turn on Bluetooth on your PC, then select Add Bluetooth or other device > Bluetooth. Choose your device named – “FMM880_last_7_imei_digits”, without LE in the end. Enter default password 5555, press Connect and then select Done.
3. You are now ready to use the device on your computer.

wiki.teltonika-gps.com/view/FMC880_LED_status

HOW TO INSTALL USB DRIVERS (WINDOWS)

1. Please download COM port drivers from here1.
2. Extract and run TeltonikaCOMDriver.exe.
3. Click Next in driver installation window.
4. In the following window click Install button.
5. Setup will continue installing the driver and eventually the confirmation window will appear. Click Finish to complete the setup.

wiki.teltonika-gps.com/images/d/d0/TeltonikaCOMDriver.zip

CONFIGURATION

At first FMM880 device will have default factory settings set. These settings should be changed according to the users needs. Main configuration can be performed via Teltonika Configurator1 software. Get the latest Configurator version from here2. Configurator operates on Microsoft Windows OS and uses prerequisite MS .NET Framework. Make sure you have the correct version installed.

wiki.teltonika-gps.com/view/Teltonika_Configurator
wiki.teltonika-gps.com/view/Teltonika_Configurator_versions

MS .NET REQUIREMENTS

dotnet.microsoft.com/en-us/download/dotnet- framework/net462

Downloaded Configurator will be in compressed archive. Extract it and launch Configurator.exe. After launch software language can be changed by clicking ? in the right bottom corner.

Configuration process begins by pressing on connected device.

After connection to Configurator Status window will be displayed.

Various Status window1 tabs display information about GNSS2, GSM3, I/O4, Maintenance5 and etc. FMM880 has one user editable profile, which can be loaded and saved to the device. After any modification of configuration the changes need to be saved to device using Save to device button. Main buttons offer following functionality:

Most important configurator section is GPRS – where all your server and GPRS settings6 can be configured and Data Acquisition7 – where data acquiring parameters can be configured. More details about FMM003 configuration using Configurator can be found in our Wiki8.

1. wiki.teltonika-gps.com/view/FMM880_Status_info
2. wiki.teltonika-gps.com/view/FMM880_Status_info#GNSS_Info
3. wiki.teltonika-gps.com/view/FMM880_Status_info#GSM_Info
4. wiki.teltonika-gps.com/view/FMM880_Status_info#I.2FO_Info
5. wiki.teltonika-gps.com/view/FMM880_Status_info#Maintenance
6. wiki.teltonika-gps.com/view/FMM880_GPRS_settings
7. wiki.teltonika-gps.com/view/FMM880_Data_acquisition_settings
8. wiki.teltonika-gps.com/view/FMM880_Configuration

QUICK SMS CONFIGURATION

Default configuration has optimal parameters present to ensure best performance of track quality and data usage. Quickly set up your device by sending this SMS command to it:

Note: Before SMS text, two space symbols should be inserted.

GPRS SETTINGS:

1. 2001 – APN
2. 2002 – APN username (if there are no APN username, empty field should be left)
3. 2003 – APN password (if there are no APN password, empty field should be left)

SERVER SETTINGS:

1. 2004 – Domain
2. 2005 – Port
3. 2006 – Data sending protocol (0 – TCP, 1 – UDP)

DEFAULT CONFIGURATION SETTINGS

After successful SMS configuration, FMM880 device will synchronize time and update records to configured server. Time intervals and default I/O elements can be changed by using Teltonika Configurator1 or SMS parameters2.

1. wiki.teltonika-gps.com/view/Teltonika_Configurator
2. wiki.teltonika-gps.com/view/Template:FMB_Device_Family_Parameter_list

MOUNTING RECOMMENDATIONS

DEVICE FASTENING

• Locate the battery in your vehicle. If present remove the battery cover to access the battery.
• There is a double sided tape on the back of the device (Double sided tape on the back), use it to attach the device on the battery, so that the GNSS antenna and LEDs indicators are facing up (Example of device mounting).

CONNECTING POWER WIRE

• Device power wire is designed to be directly connected to the positive terminal fastener of the vehicle battery (Example of device mounting).

CONNECTING GROUND WIRE

• Device ground wire is designed to be directly connected to the negative terminal fastener of the vehicle battery (Example of device mounting).

1. DOUBLE SIDED TAPE ON THE BACK
2. EXAMPLE OF DEVICE MOUNTING

LED INDICATIONS

NAVIGATION LED INDICATIONS

STATUS LED INDICATIONS

BASIC CHARACTERISTICS

• wiki.teltonika-gps.com/view/FMM880_Features_settings
• wiki.teltonika-gps.com/view/FMM880_Sleep_modes#Deep_Sleep_mode
• wiki.teltonika-gps.com/view/FOTA_WEB
• wiki.teltonika-gps.com/view/Teltonika_Configurator

SAFETY INFORMATION

This message contains information on how to operate FMM003 safely. By following these requirements and recommendations, you will avoid dangerous situations. You must read these instructions carefully and follow them strictly before operating the device!

• The device uses SELV limited power source. The nominal voltage is +12 V DC. The allowed voltage range is +10…+30 V DC.
• To avoid mechanical damage, it is advised to transport the device in an impact-proof package. Before usage, the device should be placed so that its LED indicators are visible. They show the status of device operation.
• Before unmounting the device from vehicle, ignition MUST be OFF.

CERTIFICATION AND APPROVALS

• This sign on the package means that it is necessary to read the User‘s Manual before your start using the device. The full User‘s Manual version can be found in our Wiki1. wiki.teltonika-gps.com/view/FMM880
• The RoHS1 is a directive regulating the manufacture, import and distribution of Electronics and Electrical Equipment (EEE) within the EU, which bans from use of 10 different hazardous materials (to date). wiki.teltonika-gps.com/view/FMM880_RoHS

This sign on the package means that all used electronic and electric equipment should not be mixed with general household waste.

CHECK ALL CERTIFICATES
All the newest certificates may be found in our Wiki2. wiki.teltonika- gps.com/view/FMM880Certification%26_Approvals

WARRANTY

We guarantee our products 24-month warranty1 period. All batteries carry a 6-month warranty period. Post-warranty repair service for products is not provided. If a product stops operating within this specific warranty time, the product can be:

• • Repaired
  • Replaced with a new product
  • Replaced with an equivalent repaired product fulfilling the same functionality
  • Replaced with a different product fulfilling the same functionality in case of EOL for the original product

Additional agreement for an extended warranty period can be agreed upon separately.

WARRANTY DISCLAIMER

• Customers are only allowed to return products as a result of the product being defective, due to order assembly or manufacturing fault.
• Products are intended to be used by personnel with training and experience.
• Warranty does not cover defects or malfunctions caused by accidents, misuse, abuse, catastrophes, improper maintenance or inadequate installation – not following operating instructions (including failure to heed warnings) or use with equipment with which it is not intended to be used.
• Warranty does not apply to any consequential damages.
• Warranty is not applicable for supplementary product equipment (i. e. PSU, power cables, antennas) unless the accessory is defective on arrival.
• More information on what is RMA1

wiki.teltonika-gps.com/view/RMA_guidelines

References

• Download .NET Framework 4.6.2 | Free official downloads
• FMC880 LED status - Wiki Knowledge Base | Teltonika GPS
• FMM880 - Wiki Knowledge Base | Teltonika GPS
• FMM880 Certification & Approvals - Wiki Knowledge Base | Teltonika GPS
• FMM880 Configuration - Wiki Knowledge Base | Teltonika GPS
• FMM880 Data acquisition settings - Wiki Knowledge Base | Teltonika GPS
• FMM880 Features settings - Wiki Knowledge Base | Teltonika GPS
• FMM880 GPRS settings - Wiki Knowledge Base | Teltonika GPS
• FMM880 Sleep modes - Wiki Knowledge Base | Teltonika GPS
• FMM880 Status info - Wiki Knowledge Base | Teltonika GPS
• FMM880 Status info - Wiki Knowledge Base | Teltonika GPS
• FMM880 Status info - Wiki Knowledge Base | Teltonika GPS
• FMM880 Status info - Wiki Knowledge Base | Teltonika GPS

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>