BLIIOT 08045496 Wireless Outdoor Strobe Siren User Manual
- June 13, 2024
- BLIIOT
Table of Contents
The User Manual of Wireless Outdoor Strobe Siren
Product Overview
The wireless outdoor siren is an accessory of smart alarm system.
It is an extremely powerful 115dB outdoor siren and could work for 36 months
standby by 3xD(LR20) dry cells. Mounting it on the outside of the house can
show potential burglars that your house is alarm-proof.
It is easy to set up and reliable. With core microprocessor and tamper device,
it will alarm and push notifications will be showed in the App when it is
tampered.
The middle indicator will light up once in 15 seconds in the event of low
battery and push notification will be sent to the APP.
Specifications
| • Power Supply | DC12V lA |
|---|---|
| • Battery | 3x D(LR20) dry cells |
| • Transmission Distance | Up to 1000m without obstacle |
| • Standby Current | sllOpA |
| • Working Current | s400mA |
| • Siren Volume | 115dB@30cm |
| • Lens Color | Red/Blue |
| • Working Temperature | -20°C-60°C |
| • Humidity | 90%rh(non-condensing) |
| • IP Grade | IP54 |
| • Bubble Level | Yes |
| • Tamper Device | Supported |
| • Prompt Light and Tone Adjustment | Supported |
| • Battery Standby Time | 36 Months |
| • Housing Material | PC+ABS+Anti-UV |
| • Weight | 765.9g(battery not included) 1185g(battery included) |
| • Dimension | 277.5x233x75mm (LxWxH)(±0.1mm) |
Appearances
Pairing with main panel by App
- Install the batteries and turn on the siren. Make sure the indicator is flashing, otherwise please reset it.
- Scan the QR code on the siren with APP.;
- The pairing result can be confirmed in App and the siren will beep twice.
*Test: You can also press “Test” button in App to check whether the siren is paired successfully or not.
Settings
Lighting Effects(Configurable)
| Working Status | Home Arm | Arm | Disarm | SOS |
|---|---|---|---|---|
| Lighting Position | Right | Left | Both | Both |
| Lighting Modes | Flash/OFF | Flash/OFF | Flash/OFF | Flash Sharply/OFF |
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment o and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>