Guangdong Chuangpu Technology HCP007 Smart LED Strip Light User Manual

**Guangdong ** Smart LED strip Lights
User Manual

Please read this manual carefully before using the product, and keep if for records properly.

Distribution network disruption:

1. When the light is powered on press and hold Won remote control or use the button and Keep a toe for about 5-10 seconds until the red light flashes and then realize it click the app to add the product and the light mode will be restored after the connection is successful.
   

How to connect one set of light strips?

How to connect two sets of light strips?

Please don’t connect two sots of LED strip lights in series directly

installation

STEP I Connect the IR Receiver to STEP 2 Arrow to Arrow or Buckle to the Power Adapter Buckle

STEP 3: Tear off the plastic on the adhesive tape and stick the strip to any smooth, dean, and dry places.
please make sure the surface is smooth, dry, and clean DON NOT sticks the led strip on the surface, such ad knotted: wool fabrics, dust wall, rough plaStiC surface. frosted glass

Step 4: Paste the LED strip. then Press the entire LED strip (you could Fix it with a buckle)
STEP5 : Install finished. Use the IR remoter or APP to operate the lights.
Please pull out the transparent film Make sure from the bottom of the remote The battery is properly powered.
The remoter must aim at the emitter while operating. (Please view the detailed instruction on Remote controller and APP controller User Manual)

caveat

Do not con to the power supply before installation.

please spread out the light strip before connecting the power supply.
DIY LED strip

Hew to cut LED strip

1. Please cut through the LED strip Mark the line above 2
2. Low voltage LED step Every 3 LEDs can be cut once.

Download and install “Gvvoo Home” APP

|
---|---
https://a.smart321.com/comgvvoohome| https://a.smart321.com/comgvvoohome

Scan OR code to download APP or search “Gyvoc• Home on Google Play or APP store Download it.
This APP supports Android 4.3 and above I IOS 8.0 and above.
APP Operation
Click the Gvvoo Home APP icon

How to connect a smart device to the APP

1. After opening the app will ask You to register your device. enter Your phone number or Email address choose you Country of residence. If you choose a phone number You will receive a text registration Code. If you choose to email. You can create a password.
2. After creating an account. please log into the application with your username and password.

Connection method 1

When connecting the product. please keep the phone and the product at Click “Gwoo Home page’ within 15 meters The icon “+” in the upper right corner selects “Auto-Discovery”. Wait for 3-6 seconds to search for products. After the search is successful, the product will automatically pop up. Then click Next to connect

important hint
When the first user successfully connects to the product, If the second user needs to connect to the product, The first user must remove the device from the phone. New user to the re-configure network. click -Gwoo home page” The icon “4.” in the upper right corner selects “Auto Discovery’ and waits for 3-6 seconds to search for products After the search is successful the product will automatically pop up, and then click Next to connect

Connection method 2

When connecting the product, the phone and the product Please keep within 15 meters Click the icon “+” in the upper right corner of “Gvvoo Home page’ Select “LED light strip”, Then select the number HCP20111 to connect

important hint

When the first user successfully connects to the product, If the second user needs to connect to the product. The first user must remove the device from the phone. New user to the re-configure network, click “Gvvoo home page’ The icon “+” in the upper right corner selects ‘Auto-Discovery and waits for 3-6 seconds to search for products. After the search is successful, the product will automatically pop up. and then dick Next to conned

1. Music mode
4 effects The light will follow the music The rhythm changes. Enjoy every Rhythm beating
2. Color mode
16 million colors. choose your Favorite color Life is not monotonous
3. Scene mode
Eight scene effects The light is selected The scene changes.
4. Time timing
Control the light specified Time on and off Select week, then select On and off time.
5.DIY mode
With the autonomous control, customize your exclusive lighting. The first step is to name your lights. The second step is to choose your favorite color and add up to 10 colors. The third step is to select the light bounce mode. Do you want to apply lighting under the fourth step? Complete the setting.

Product parameter

Product Name: Smart LED strip light
Input Voltage: AC85V 26W
Working Temperature: -20°C – 45°C
LED Type : 5050 RGB
Output Voltag e: DC 12V
Model : HCP20111
Manufacturer: Guangdong Chuangpu Technology Co.. Ltd. Address: Fenggang Town, Dongguan City. Guangdong Province 3rd Floor. No. 20 Yinxi Road. Wuhan Village

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution : Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
RF Exposure Information
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>