nexvoo N110 USB Video Bar

nexvoo N110 USB Video Bar

Package Includes

1. One View N110
   

2. Power adapter

3. Wall mounting bracket

4. 5m USB-C cable

5. Wall mounting hardware

6. Remote control

7. User Maunal

One View N110 Introduction

1. 4K HDR Camera
2. LED indicators
3. Base brackel
4. Kensington lock
5. USB-A, for connecting exteral extension devices
6. Blustooth key
7. USB-C, for connecting PG computers
8. Power Key

LED indicator status

| The green LED indicator is on when the camera is turn on
---|---
The green LED indicator blinks when the device is searching for the remote control
The green LED indicator blinks for 3 seconds when the device is connected to the remote control
The green LED indicator blinks for 3 seconds when the Al function isturned on
| The red LED indicator is off when the camera is tum off
The red LED indicator blinks when the microphone is muted
“The red LED indicator blinks for 3 seconds when the Al function is tumed off

‘The actual color of LED indicator may be slightly different and shal prevail

Connection with Bluetooth remote control

• N110 will automatically perform Bluetooth search after power-on. If the remote control s found, the pairing connection will be automatically performed.
• If the remote control is not found within 5 minutes, the search will be stopped. Please short press the Bluetooth button of the device to restart the search
• If N110 has been paired with the remote control, you can press the Bluetooth button for 3 seconds to delete the pairing information.After deleting the pairing information, you can pair and connect with the new remote control,
• IF NT10 has been paired but failed to connect with the remote control successfully, short press the Bluetooth bunion to make the device search for the remote control again,

Remote Control Features

The following figure and table identify the functions of the keys on the remote control.

1. Mute
2. Camera Preset 1
3. Camera Preset 2
4. Pan and Tilt
5. Volume up/down
6. Zoom infout
7. Al Switch
8. Bluetooth

LED indicator status

| The red LED indicator lights for 3 seconds when the remote control isturned on
---|---
The red LED indicator lights for 3 seconds when long press Bluetooth key to clear pairing information
The red LED lights up for 3 seconds when the remote control is connected
The red LED indicator lights for 3 seconds when long press preset 1 and 2 to save the successful lens position

Connection with N110

• The powered on remote control will be automatically paired with the One View NT10. If its not paired successfully, please short press the Bluetooth button of One View N110 and remote control o pair and connect again.
• If the remote control is paired, you can press the Bluetooth button for 3 seconds to delete the pairing information. After deleting the pairing information,the remote can be paired with the new N110 again.
• The remote control s paired but not connected o the N110. After 1 minute, it enters the. sleep state. Please press any key o wake up the remote control and reconnect it
• The remote control can only be paired and connected by one N110.

Advanced Al Technologies

Advanced Al technologies includes Auto Framing and Speaker Tracking funct ns The Auto Framing is based on participants’ face detection, realizing real-time detection and position tracking of everyone in the meeting, and can automatically adjust the camera according to the number of participants and changes in position, s that the screen covers all participants and their position. Besides, based on the Auto Framing function, the device adds a speaker tracking function, In a meeting the camera lens can be individually focused on the speaker giving the speaker the best close-up shot of a single person.
You can turn off or turn on by Al switch button through Remote Control.

Placement

We recommend placing the camera as close to eye level as possible.

You can get the best performance.

1. Placement on table:
   Place on a table or shelf near the monitor.

2. Mount on the wall:
   a. Attach bracket to the wall.
   Please use the screws which are in the box or appropriate type of screws for your wall type.
   
   b. Attach the camera to the bracket.
   

3. Place on or under display:
   Adjust the equipment angle to make all participants in the picture when Al is off.
   

Please contact us to choose Nexvoo optional accessory

Connection

Connecting One View N110 is the same whether you plan on using a dedicated PC or Mac in the f00m, o your team members bring a laptop to the room 10 fun the meeing.

This is normal setup step as below, may have a litte different depends on your device.

1. Plug N110 into power.
   

2. Connect the USB-C cable from N110 to your PC or Mac.
   

3. If you need to cast a screen, please connect your PC computer or Mac to the display via HDMI or RGB cable
   

4. Diagram of all connections.
   

5. Enter your software settings, then find audio and video equipment. Select Nexvoo N110 as the default device and dlick “Save

Starting A Video Call

After installing One View N110 and ensuring it is the default device in your video conferencing application, simply start the application in the normal manner and enjoy the benefits of improved audio and video.

Please go to wwwnexv00.com if you want to learn more.

Web Management

You can configure the Nervous One View USB video bar on the Web management.
You can configure the following settings on the Web management.

• View device information
• Remote control configuration
• Camera Tracking
• System update & reset
• Change password
• Restore defaul settings

Note: Web management only supports Windows system.

Network configuration

1. After One V iew is connected to the power supply, it will automatically tum on, and connect One View to your computer via USB. The computer will automatically install One View USB Audio, USB Camera and Remote NDIS drivers, then open the computer device manager to view the installed USB devices. (Set Windows 10 system as example).
   

2. Select [Computer’s Control Panel – Network and Internet – View Network Status and Tasks – Change Adapter Settings], you can see the Ethernet with the device name *Remote NDIS based Internet Sharing Device”, right-click the Ethernet, select “Properties”, and open [Network-Internet Protocol Version 4(TCP/ IPv4)], then manually configure the IP address.

   • IP address: 172.16.110.7

   • subset mask: 255.255.0.0

   • Default gateway: 172.16.255.255
     

   • Click OK to save configuration

Login Web management

1. Start the browser, enter http://172.16.110.6 to open the login interface of the OneView Web management platform.
2. Enter the username and password, click “Sign in” to login to the web management platform. (Default usemame: Admin, Password: 123456)
   Note: Some browsers may not be fully compatible. It is recommended to use Chrome/Firefox/Microsoft Edge browser etc.

View device information

You can view the basic information for your One View USB device through Web.
Management platform.

Procedure

1. Login to the web management platform through a browser.
2. In the Dashboard section, view the basic information for your OneView USB device.

Remote control configuration

You can clear the paired remote control in Bluetooth Settings menu through the web. management platform.

Procedure

1. Login to the web management platform through a browser.
2. Go to General Settings – Bluetooth Settings.
3. Click “Clear Remote Control” button to clear the paired remote control, then you can pair and connect a new remote control.

Camera tracking

You can set the Al technology of the device in the Camera Tracking menu through the web management platform.

Procedure

1. Login to the web management platform through a browser.
2. Go to General Settings — Camera Tracking
3. Control the One View USB device through the following functions:

device will enable Auto Framing and Speaker Tracking functions
Tracking Speed| Tracking speed setting refers to how long the speaker continues to speak, the screen will automatically track the speaker and focus on the speaker.You can set Fast/Normal/Slow, the default is Fast.
Return to the Panorama Screen regularly during Tracking| The default is on. After this function is turned on, the system will return to the panoramic screen regularly according to the time set in the “Return Time” item. If it is turned off, the screen will not be returned to the panoramic screen regularly during tracking, it will continue to focus on the speaker until it is no longer speaking.
Return Time| Return time refers to when the screen is tracked and focused on the speaker, how long the speaker has not spoken or keeps speaking will automatically return to the panoramic screen.you can set 15s/30s/45s/60s, the default is 30 seconds.

Update the One View USB Device

You can update the firmware of the One View USB device through Web Management platform.

Procedure

1. Login to the web management platform through a browser.
2. Go to System Settings – Firmware Update.
3. Firmware update includes MCU update and system update.

• MCU update
  Click or drag the firmware file with the format of .bin to the firmware import area, then click “Update” button to start the MCU update.

• System update
  Click or drag the firmware file with the format of .img to the firmware import area, then click “Update” button to start the system update.
  Note: Make sure your computer doesn’t enter sleep mode during the firmware update.
  Otherwise, the update may fail.

Change Your Password

Nervous recommends that you change your device’s password from the default for security reasons.

Procedure

1. Login to the web management platform through a browser.
2. Go to System Settings — Change Password
3. Enter your Current Password.
4. Enter a new password in New Password and Confimm Password fields.
5. Click Save.

Restore Default Settings

You can erase all configuration and restore the One View USB video bar default setting through Web Management platform.

The default settings to be cleared include but are not limited to:

• Password
• Remote control presets
• Camera Tracking
• Audio settings
• Bluetooth settings

Procedure

1. Open the login interface of the Web management platform.
2. Click Restore Default Settings.
3. Enter the comect SN number of the device.
4. Click OK to restore default settings.

Regulatory Notices

1. Operating Ambient Temperatures
   Operating temperature: +32 to 104°F (0 to 40°C)
   Storage temperature: -13 to +160°F (-25 to +70°C)
   Relative humidity: 5% to 80%, non-condensing

2. Warranty
   Our product warranty i imited only f the unitsef, when used normally in accordanc vith the operating constructor and the system snvironmort. Wo are notlable for damage orlss resuling from the use of ths product,orfor any caim from a third party. We are ot abl for problems wth Nexvoo device arsing fom the use of s product we are not bl fo financial damages, ost profits, claims from third parties, etc., arising from the use of tis product.

Explanation Of The Symbols DC

• Symbol is the DC voltage symbol.
• WEEE Warning symbol

To avoid the potential effects on the environment and human health as a result of the presence of hazardous substances in electrical and electronic equipment, end users of electrical and electronic equipment should understand the meaning of the crossed-out wheeled bin symbol
Do not dispose of WEEE as unsorted municipal waste and have to collect such WEEE separately.

Restriction Of Hazardous Substances Directive (ROHS)

‘This device complies with the requirements of the EU ROHS Direcive.
Statements of compliance can be obtained by contacting [email protected].

Safety Instructions

Save these instructons. Read these safety insiructions before uss!

General Requirements

• Before you install and use the device, read the safety instructions carefully and observe the station during operation.
• During the process of storage, transportation, and operation, please always keep the device dry and dlean, avoid collision and rash.
• Please attempt not to dismantle the device by yourself. In case of any discrepancy, please contact the appointed maintenance center to raper.
• Please refer to the relevant laws and statutes while using the device. Legal rights of others should be respected as well.

Environmental Requirements

• Place the device at a well-ventilated place. Do not expose the device under direct sunlight.
• Keep the device dry and free of dusts.
• Do not place the device on or near any inflammable o fire-vuinerable object, such as rubber-made materials.
• Keep the device away from any heat source or bare fire, such as a candle or an electric heater.

Operating Requirements

• Do notleta child operate the device without guidance. – Do notlet a chid play with the device or any accessory in case of accidental swallowing. Please use the accessories provided or authorized by the manufacturer oy.
• Please use the provided surge profection power socket only.
• Before plugging or unplugging any cable, make sure that your hands are completely dry.
• Do not spill liquid of any kind on the product or use the equipment near water, for example, near a bathtub, washbow,Kichen sink, wet, and basement or near a swimiming pol.
• During a thunderstorm, stop using the device and disconnect it power supply and USB connecton ine o avoid lighting sire.
• If the device is left unused for a rather long time, disconnect it from the power supply and unplug the power plug. When there is smoke emittd from the device, or some abnorma noise or smel, isconnect the device from the power supply, and unplug the power plug immediately.
• Contact the specified maintenance center for repair.
• Do not insert any object into equipment slots that is not part of the product or auxiliary product.
• Befors connecting a cable, connect the grounding cabl of the device frst.
• Do not disconnect the grounding cable ntil you disconnect al other cables.

Cleaning Requirements

• Before cleaning the device, disconnect it from the power supply.
• Use a piece of soft, dry and anti-static cloth to clean the device.
• Keep the power plug clean and dry.

Contact your dealer or authorized service facilty for any further questions.

FCC Caution

This device complies with part 15 of the FCC Rules. Operation is subject to the following two. conditions:

1. This device may not cause harmful interference, and
2. this device must acoept any interference recsived, including interference that may cause undesied operaton.

Any Changes or modifications ot expressly approved by the party responsible for compliance could void the user’s authority o operate the equipment

Note: This equipment has been tested and found to comply with te limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference n a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference o radio communications. However, ther s no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user s encouraged to ty to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help,

RF warning for Portable device

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Copyright

Except where expressly stated otherwise, no use should be made of the Documentation Software, Hosted Service, or hardware provided by Nexvoo.
All content the documentation, Hosted Service, and the product provided by Nexvoo including the selection, arrangement and design of the content is owned either by Nexvoo or its licensors and is protected by copyright, and other intellectual property laws including the sui generis rights relating to the protection of databases. You may not modify, copy, reproduce, republish, upload, post, transmit or distribute in any way any content, in whole or in part, including any code and software unless expressly authorized by Nexvoo.
Unauthorized reproduction, transmission, dissemination, storage, and or use without the express written consent of Nexvoo can be a criminal, as well as a civil offense.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

No.56-58, North 5F, Huoju Plaza, Huoju Road, Huli district Xiamen city, Fujian province China
[email protected]
USA office: 9325 Uptown Drive, Suite 900 IN 46256 Indianapolis USA [email protected]
EMEA office: Poort van Midden Gelderland Rood 22 6666 LT Heteren The Netherlands [email protected]

Symbols

Documents / Resources

| nexvoo N110 USB Video Bar [pdf]
N110 USB Video Bar, N110, USB Video Bar, Video Bar, Bar
---|---

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>