nexvoo N710 Conference Microphone Speaker User Manual
- June 3, 2024
- nexvoo
Table of Contents
nexvoo N710 Conference Microphone Speaker
Please read and keep this instruction carefully before using the product
Product Instruction
NEXVOO Conference Microphone Speaker is a smart conference microphone speaker
designed for office people, pickup, amplification, recording and subtitles. It
can realize 360°sound pickup, intelligent noise reduction, recording and
transfer writing and other functions. It solves the pain points of meetings,
such as inaudible remote call, noisy environ-ment, and difficult to organize
meeting minutes, so that users can enjoy a clear, stable and smooth remote
call experience anytime and anywhere.
Applicable scene: teleconference, online learning, media interviews, business
negotiation, etc.
List of accessories
Bottons and lights instruction
Instructions for use
Connection
The initial Bluetooth name of the device is “N710 ” (that is, the last
four serial at the bottom of the product).
＊Bluetooth connection
- Mobile Bluetooth connection
After the device is turned on, long press the (Bluetooth icon) Bluetooth button for 2 seconds. After the Bluetooth indicator flashes, turn on the Bluetooth function of the mobile phone and search the Bluetooth device “N710 *
-
- *” for matching connectionï¼›Or turn on the NFC function of the mobile phone at the same time, and touch the NFC logo area of the device for Bluetooth connection. The Bluetooth indicator light is always on, so that the connection is successful.
- Computer Bluetooth connection
After the device is turned on, long press the (Bluetooth icon) Bluetooth button for 2 seconds. After the Bluetooth indicator flashes, open the Bluetooth monitoring setting page of the computer system and select the device for matching connection.
The Bluetooth indicator light is always on, so that the connection is successful.
USB connection
After the device is turned on, connect the device to the computer via USB
cable. After hearing the prompt sound, the connection is successful.
NOTE: The current version does not support OTG cable directly connected mobile
phone.
Charging instructions
- When the USB data cable is used to connect the computer, the device will enter the charging state no matter it is turned on or not.
- If consumers use a power adapter for power supply, they should buy a matching power adapter that can obtain CE certification and meet the standard requirements.
NOTE: Before first using the device, it is recommended to charge for 1 hour to ensure sufficient power.
Basic parameters
| Product name | Conference microphone speaker |
|---|---|
| Model | N710 |
| Size | 112.5mm112.5mm35.4mm |
| Bluetooth | Bluetooth v5.1 |
| Pickup radius | 4m |
| Microphone | Four omnidirectional simulated MEMS |
| Speaker | 5w |
| Battery capacity | 2000mAh |
| Charge | 5V 2A Type-C interface |
FAQ
| Description | Handling advice |
|---|
The volume is not synchronized when the phone is connected with Bluetooth
| 1. Verify that the phone supports Bluetooth sound synchronization. Some Android / Hongmeng phones do not support volume synchronization.
2. Check whether the mobile phone is turned on for volume synchronization. Some mobile phone models need to open the volume set permission in the system Settings.
When the device is connected to the phone with Bluetooth, the phone / message is not ringing from the device| 1. Check whether the mobile phone call volume is turned on, or whether the volume is too low.
2. Check that the device can speak normally.
3. Check whether the mobile phone call input and output device is the device.
There is no sound when the device connected to the Windows computer via Bluetooth.
| 1. Recommend that the speakers select a native device with the word “stereo” for playing music.
2. Recommend that during calling or meeting, the speaker selects a native device with the word “hand free”.
| Description | Handling advice |
|---|
There is no sound when the device connected to the ZOOM /Teams etc APP on computer via Bluetooth.| 1. Check that the microphone and speakers of the call software are properly connected to the device.
2. Check whether the computer audio drive is normal. Recommend to restart the computer and try again.
The device does not respond when connected to the computer with the USB.
| 1. Check whether the device is in Bluetooth connection. Please disconnect the Bluetooth connection first, and then use USB cable to connect the device.
2. Check whether the USB data cable is
damaged.
3. Restart the device and try it again.
F@ CE: RoHS
Nexvoo, Inc.
-
Asia office:
No.56-58, North 5F, Huoju Plaza, Huoju Road, Huli district Xiamen city, Fujian province China support@nexvoo.com -
USA office:
9325 Uptown Drive, Suite 900 IN 46256 Indianapolis USA support@nexvoo.com -
EMEA office:
Poort van Midden Gelderland Rood 22 6666 LT Heteren The Netherlands info@nexvoo.eu
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>