HAGOR 8417 BL Full Motion Instruction Manual
- June 13, 2024
- HAGOR
Table of Contents
HAGOR 8417 BL Full Motion
Product Information
Product Name: BL Full Motion 200 – I
Model Number: Art.-Nr.: 8417
Language: German (DE)
Caution : Technical devices are of considerable value. Handle the components carefully during installation and protect them if necessary. Secure the installation area to prevent injuries and material damage. Check if the included materials are suitable for the installation site and replace them if necessary. If you have any doubts or questions about the installation, contact us or other trained specialists.
Scope of Delivery
- M4X12MM Screws (A1) – 4x
- M5X12MM Screws (A2) – 4x
- M6X12MM Screws (A3) – 4x
- M8X16MM Screws (A4) – 4x
- Washer (A5) – 4x
- B1 Screws – 3x
- B2 Screws – 3x
- B3 Screws – 3x
- TV Plate
- Wall Plate
- Safety Bolt
Product Usage Instructions
- Identify the type of wall you will be installing the product on. It can be either a concrete or brick wall (Beton- oder Ziegelwand) or a wood stud wall (Leichtbauwand).
- If you have a concrete or brick wall, use screws B1, B2, and B3 to secure the TV plate and wall plate at the desired location. Use a safety bolt to further secure the installation.
- If you have a wood stud wall, use screws B1 and B3 to secure the TV plate and wall plate at the desired location. Use a safety bolt to further secure the installation.
- When using screws A1 or A2, make sure to use the washer A5. Screws A3 and A4 do not require the washer.
- If the supplied screws do not fit, you will need to replace them with suitable screws that fit the specific requirements of your installation.
Caution!
- Technical devices are of considerable value. You should therefore handle the components carefully during installation and protect them if necessary.
- If necessary, the installation area should also be secured. Falling parts can cause injuries and material damage.
- The materials included in the scope of delivery may not be suitable for the special conditions at the installation site. Please check this in advance and replace it with suitable materials if necessary.
- If you are unsure about the installation of the product or have any questions, please contact us or other trained specialists.
Scope of delivery
INSTALLATION
- When using A1 or A2, please use the washer A5.
- This is not intended for screws A3 and A4.
- If the supplied screws selection does not fit they have to be replaced in the field.
HAGOR Products GmbH | Oberbecksener Straße 97 | D-32547 Bad Oeynhausen | Telefon: +49(0)57 31-7 55 07-0 | Mail: hagor@hagor.de
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>