Boneco P130 Air Purifier Instructions
- June 5, 2024
- BONECO
Table of Contents
TRADITION SINCE
+A SWISS COMPANY
P130
MANUAL Read and save these instructions
INSTRUCTIONS FOR USE
Always observe all safety notes (included separately in delivery).
TECHNICAL DATA
*TECHNICAL DATA
**
| Mains voltage | 230 V ~ 50 Hz |
|---|---|
| Power consumption | Standby: 0.5 W |
Min – Max: 5 – 9 W
Operation noise level| 48 dB(A)
CADR| 60 m 3 / h
Dimensions L × W × H| 162 × 162 × 276 mm
Weight (empty)| 1.15 kg
- at 230 V ~ 50 Hz
INTRODUCTION
Thank you for purchasing the BONECO P130 air purifier. With UV light and filtration to clean the air, the BONECO P130 air purifier will greatly improve the quality of the air in your home, office, or other environments. Once you’ve experienced the purity of BONECO P130 air, visit us at our website to find out more ways to improve the quality of your air and your life with our premium products and upgrades. Please be sure to read the following instructions carefully to ensure optimal performance and safety.
SCOPE OF DELIVERY
OVERVIEW AND PART NAMES
- BONECO P130
- Filter & Prefilter
- Bottom Cover
STARTING UP
SYMBOLS AND DISPLAYS
| Power Button | Switch the appliance on and off |
|---|---|
| Fan Level / Filter Reset Button | Tapping once switches the fan levels L |
and H
Hold for 3 sec. to reset the filter light
CLEANING AND MAINTENANCE
CARE INSTRUCTIONS
Do not use alcohol or corrosive cleaning agents for cleaning.
Always unplug the appliance from the power outlet before cleaning.
FILTER COMPARTMENT
Use a soft, damp cloth to clean the exterior.
-
Place your device upside down.
-
Turn the bottom cover anti-clockwise until it unlocks.
-
Remove the filter.
-
Use a dry soft towel to clean the filter compartment.
-
Place the filter back in the device and lock the bottom cover.
CLEANING THE FILTER AND PRE-FILTER
After removing the combination Filter and Pre-Filter from the device it can be
cleaned with a vacuum cleaner and/or with a dry soft towel.
REPLACING THE FILTER
The filter should be replaced after the filter light turns on. After replacing
the filter press the Reset Filter button for 3 seconds to reset the filter
reminder.
www.boneco.com
BONECO is a registered trademark of BONECO AG, Switzerland
BONECO AG, Espenstrasse 85, 9443 Widnau, Switzerland
80640-01