E-Flite EFLU32050 UMX Conscendo Glider Instruction Manual

June 14, 2024
E-flite

E-Flite EFLU32050 UMX Conscendo Glider

E-Flite-EFLU32050-UMX-Conscendo

UMXTM Conscendo

Specifications

  • Dimensions: 802mm x 524mm

  • ESC: DSMX (SPMA3197)

  • Moteur: Servo

  • Transmitter: DX6e DXS 2.4GHz (SPMR1010)

  • Flight Battery: Li-Po 30C 300mAh 11.1V 3S (SPMX3003SJ30)

  • Battery Charger: Compatible with LiPo 3S battery
    SPMX3002S30

  • Low Voltage Cutoff (LVC) feature

Product Usage Instructions

Registration

This product is intended for users aged 14 and above. It is not
a toy.

Powering On the Aircraft

  1. Open the battery hatch by lifting it up.
  2. Ensure the aircraft is in a wind-sheltered area for 5 seconds to allow the aircraft to initialize.
  3. Connect the flight battery to the ESC (Electronic Speed Controller) following the correct polarity.
  4. If the aircraft is in SAFE mode, a LED indicator will show that SAFE mode is active. If in AS3X mode, the LED indicator will be above 25%.

Wing Installation

  1. Open the battery hatch by lifting it up.
  2. Push the throttle stick forward. The elevator will lower, causing the aircraft to descend.

Control Surface Direction Test

  1. Activate the throttle cut function.
  2. Connect the flight battery.
  3. Push the elevator stick forward. The elevator will lower, causing the aircraft to descend.
  4. Check the direction of the rudder and ailerons to ensure they are moving correctly.

Centering Controls
Before flying, ensure all control surfaces are centered. Adjust the control rods if necessary.

Manual Launch
The aircraft can be manually launched by hand. Ensure a firm grip on the fuselage and give it a gentle toss forward.

Flight Mode
This aircraft has two flight modes: SAFE Select and AS3X. Ensure you are familiar with the differences between these modes before flying.

FAQ

Q: What is the minimum age requirement for using this product?
A: This product is intended for users aged 14 and above. It is not a toy.

Q: How do I install the wings?
A: To install the wings, open the battery hatch and push the throttle stick forward. The elevator will lower, causing the aircraft to descend.

Q: How do I test the direction of the control surfaces?
A: Activate the throttle cut function, connect the flight battery, and push the elevator stick forward. Check the direction of the rudder and ailerons to ensure proper movement.

Scan the QR code and select the Manuals and Support quick links from the product page for the most up-to-date manual information.

©2023 Horizon Hobby, LLC. E-flite, AS3X, UMX, DSM, DSM2, DSMX, ModelMatch, Bind-N-Fly, the Bind-N-Fly logo and the Horizon Hobby logo are trademarks or registered trademarks of Horizon Hobby, LLC.
The Spektrum trademark is used with permission of Bachmann Industries, Inc. and are used under license by Horizon Hobby, LLC.
All other trademarks, service marks and logos are property of their respective owners. US 8,672,726 US 9,056,667 US 9,753,457. US 10,078,329. US 9,930,567. US 10,419,970. Other patents pending.
http://www.horizonhobby.com/

Created 09/23

EFLU32050

551754

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals