HoldPeak LC-876 Cup Anemometer Instruction Manual

HoldPeak LC-876 Cup Anemometer

Cup Anemometer Operating Instructions

Dear Customer

• Thank you for purchasing this product.
• For best possible performance and safety, please follow these operating instructions carefully.

Use as Directed
This device serves exclusively to wind force meas­urement.

General precautions

• Check this device for possible damages before every use. If It shows visible damages, It may not be used anymore. Consult your dealer for necessary repairs.
• Never use this device close to Inflammable or explosive gases. fumes or dusts
• Do not try to dissemble the device.
• Do not clean this device by using chemicals, benzene or solvents.
• Avoid sudden change of temperature, as this may cause condensation inside the unit which may lead to damage.
• Do not dip the device under water.
• Do not put the device under endurance stress.
• Avoid strong magnetic fields which may appear near electric and electronic devices.
• Magnetic fields may lead to unwanted display due to the magnetic sensitivity of the WindStart.
• Use the WindStart exclusively within the specified ranges.
• Avoid both strong vibrations and mechanical stress.

Notice
The type of battery used is not rechargeable. When disposing of used batteries make sure you are in accordance with your local refuse disposal and envi­ronmental regulations.

Disclaimer of Warranty

• Damages caused by ignoring these operating instructions and also consequential damages will not be warranted.
• Alterations to specifications are subject to change without notice.

1. On/Off button; automatically switch off after app.8 days
2.  Mode button; Adjusting of wind force unit, Last adjusted unit will be saved
3. Display of force unlit; KM/H (kilometer/hour), KTS (knots), M/S(meter/second) MPH (miles per hour)
4. Display of current wind force
5. Display of maximum wind force Since power on
6. Display of average wind force since power on
7. MX=MAXIMUM AV=AVERAGE
8. Blinking: Please insert new battery
9. Display of current wind force in Beaufort scale(bargraph)
10. Battery door;
11. Battery type: Lithium CR2032,+poie to the top
12. Tripod thread (UNC 6.35×1.27)
13. Do not use excessive torque! Max. length of the screw is 5.5 mm!
14. Compass Measurement:
    Prefer an open field for measurements and hold the Wind Start upwards. There is no need to face it directly into the wind.

Technical data

• On-screen display:
  • current wind force
  • average wind force·
  • maximum wind force· Beaufort-bargraph  (” max.a days data storage)
• Wind force units (adjustable):
  • KM/H(kilometer/hour)
  • KTS (knots)
  • M/S(meter/second)
  • MPH(miles per hour)
• Measuring range:
  •  2.5 … 150KMH, 1.3 … 81 KTS
  • 0.7 .. .42M/S,1.5 … 93MPH
  • Resolution:0.1(0 … 19.9), 1(20 … 150)
  • Accuracy: typ. ± 4%, ± 1 Digit
  • Operating temp. range: -20 … +50 •c
  • Storage temp. range: -30 … +7o•c
  • Auto power off: affter app. 8days
  • Tripod thread: UNC 6.35×1 .27mm
  • Battery type:CR2032,replacable
  • Battery life: up to 1 o years
  • Size:143x63x28(39 top)mm
  • Weight:app.95 g(3.35 ounces)
  • Weatherproof
  • If display “ ” , please insert new battery

The above product pictures and contents are for reference only. in case of any discrepancy or update, please refer to the actual product without further notice.

CONTACT US
For any problem or concern, welcome to email us for prompt response.

AFTERSALES 1010@HOTMAIL.COM

P.S.
To make sure you can receive immediate solution and your requests processed quickly,

please email us with these information:

1. Order Number
2. Platform of Your Purchase
3. Full Model Number
4. Description of the Problem(Attaching videos or photos can help us troubleshoot the problems even faster)

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>