ILLUXTRON HV-FD Downlights Instruction Manual

: June 15, 2024
: ILLUXTRON

Table of Contents

SYMBOL EXPLANATION
SAFETY INSTRUCTIONS
ENERGY CLASS
Models
DIMMER COMPATIBILITY
DIMENSIONS
Customer Support
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

ILLUXTRON HV-FD Downlights

ILLUXTRON HV-FD Downlights

SYMBOL EXPLANATION

Symbol Protection class I: the fi tting has an earthing connection. The earth wire (yellow/green) has to be connected to the clip marked with Symbol .

Symbol Protection class II : the fi tting is double insulated and must not be connected to an Earth.

Protection class III : the fitting is only suitable for very low voltage supply.

Symbol This fitting should only be installed indoors

Only when the product is installed in a closed ceiling may it be exposed to water splashes, and only on its front side. (IP20/IP44: Strada 75 and Fido 98. IP20/IP65: Linea 75/120, Fabio 75 and Fluxe 75.)

The lighting fitting – as well as all other products from the collection – is designed, produced and tested in accordance with the strictest European safety standards (EN 60.598).

Disposal of your old product: Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. When this crossed-out wheeled bin symbol is attached to a product it means the product is covered by the European Directive 2002/96/EC. Please inform yourself about the local separate collection system for electrical and electronic products.

The fitting is suitable for fi xing to normal fl ammable surfaces. Recessed luminaires can under no circumstances be covered with insulation material or other similar materials.

SAFETY INSTRUCTIONS

If in doubt, consult a qualified electrician or contact your retail outlet. Ensure that you always install the fi tting to the relevant regulations.

ENERGY CLASS

These products contains a light source of energy effi ciency class:
G (2200-3000K) / F (2700K/3000K) / G (4000K)

Models

Fluxe 75
Fluxe 90
Linea 75
Linea 120
Strada 75
Strada 90
Fido 98
Fido 108
Fabio 75

= Available colors | Also available with (WS) wire springs.

DIMMER COMPATIBILITY

Please check our website/catalogue/datasheets for the latest HV dimmer recommendation list and more information.

DIMENSIONS

75 HV-FD (IP20/IP44 + IP20/IP65)
Hole size / Springs
CS (concrete) springs

WS (wire) springs

90 HV-FD (IP20)
Hole size / Springs
CS (concrete) springs

WS (wire) springs

Dimension
Double terminals for looping

120 HV-FD (IP20/IP65)
Hole size / Springs
GS (gyproc) springs

WS (wire) springs

120-165 mm : For plasterboard ceilings or similar harder materials
120-145 mm : For soft ceiling tiles. We recommend using a wooden plate or a ceiling ring on the reverse side of the tile