DAXYS V9M 1200lm Head Light User Manual

: June 11, 2024
: DAXYS

Table of Contents

V9M 1200lm Head Light
- Daxys Head Light
WARNING
Read User Manual Online (PDF format)
Download This Manual (PDF format)

V9M 1200lm Head Light

Daxys Head Light

User Manual

Model: Daxys Head Light

WARNING

Please charge the product at the environmental temperature
from 5 to 40 degrees Celsius;
Please check whether the charging line is good before charging;
When charging, please use the 5V USB power adapter;
Please pull the charging plug out after charging;
Please do not charge, discharge or store in the hot environment,
otherwise it will accelerate the aging of the battery; Please store
the fully charged headlights in a cool and dry place;
After the correct charge, if the battery usage time is shorter and
shorter, it means that the rechargeable battery has reached the
effective service life. Please replace the battery at the local
maintenance point and properly dispose of the waste
rechargeable battery according to local regulations;
This product should be charged once every 3 months without
use, so as not to cause damage to the battery and resulting in
unusable condition;
Please do not stare at the light when it is just turned on to avoid
damaging the eyesight.
After the light is used for long time, please do not touch the light
to avoid getting scald.
Children are forbidden to use without adults’ supervision.

1. PACKAGE LIST

2. INSTALLATION

1 Mount the bracket to the handlebar as below picture, and tighten the nut.

2 Slide the bottom of the light into the bracket. When you hear
a “click” sound, the installation is complete. Please adjust
the light angle.

light angle

Light Angle Adjustment

Loosen the nut slightly to move the bracket. Adjust the
light angle so it does not hit directly into the oncoming
traffic and then tighten the nut firmly to fix the bracket.
Adjust the light with the 360 degree adjustable bracket
to your desired angle.

Warranty Card

1. Purchase date is defined in accordance with the invoice or
receipt made by retailer.
2. Under the following circumstances, where returns are not
covered under warranty we offer a paid repair service.

AII damages caused by subjective factors, such as using under
abnormal conditions or against the user manual.
User’s independent repairing and modifying or other
unauthorised maintenance.
Damages caused by improper shipping.
3. Daxys is irresponsible for any damages caused by the
following improper uses.
Hidden safety factors or incidents caused by user’s improper
operation or other accidents.
Hidden safety factors or incidents caused by irresistible
factors.
Damages or accidents or injuries caused by user’s
independent operation against the manual or, using other
materials on the product which causes malfunction.
4. The right of modification and interpretation on the above
terms is held.

3. CHARGING

Open the rubber plug at the bottom of the headlight and insert
the USB-C cable to connect to the charging device for charging.
Charging Status: Red indicator light flashes when charging,
and blue indicator light is on after it is fully charged.
Note: The USB-C cable must be plugged in place to charge
normally.

4. OPERATION AND FUNCTION

Working Mode	Running Time
Ultra High Steady 1200lm	≈1.5 hrs
High Steady 600lm	≈3.0 hrs
Medium Steady 300lm	≈7 hrs
Low Steady 100lm	≈14 hrs
Breathe 100-50lm	≈22 hrs
Daytime Flash	≈28 hrs

1. Power On/Off: Long press the button for 0.75s.
2. Modes Change: Single click the button to change working
modes (Ultra High 1200 lm – Daytime Flash – Breathe – Low
100 lm – Medium 300 lm – High 600 lm – Cycle). The button
indicator will be light for 5s when single press in Power Off
status.
3. Long Press 2s: Long press 2s to enter into smart working
mode in N-Charge status, and short press to go back to the
memorized previous working mode.
4. Double Click: Double click the button to enter into the ultra
high brightness mode 1200 lm. Single click the button to return
to the memorized previous working mode.
5. The light will be off after long press for 10s continuously in
any working status.
★Remark: When entering into the smart working mode, the
light will flash three times, and the smart mode indicator will
become green color. Single click the button to switch back to
memorized mode and the green indicator is off.

Remaining Battery	Indicator Colour
100-61%	Blue
60-21%	Yellow
20-1%	Red Flash

Charging Time: ≈3.5 hours

Circuit Protection:
Overcharge protection/overdischarge protection / overcurrent
protection / short circuit protection / high temperature protection /
false touch protection

If the light gets hot and the inner components temperature
of 65°C is detected, it switches to high brightness mode.
When temperature is cooled off to 55°C, it switches back to
original brightness mode.
The light turns off automatically when internal component
temperature of 75° is detected.

Smart Working:
The smart mode indicator light on means the light and motion
sensor working normally.
Light Sensor Working: When there is sufficient light (≥100 lux) in
the cycling environment, the light will flash as daytime warning
light. When the cycling environment is dark (＜100 lux), the light
will enter into 500 lm steady mode.
With smart working mode, the light will be off after 120s if
without detecting any motion, and go back to smart working
mode when detecting the motion.