TENDERFOOT ELECTRONICS CLK Clock Source Plus Divider Perfect Circuit Instructions
- August 17, 2024
- Tenderfoot Electronics
Table of Contents
TENDERFOOT ELECTRONICS CLK Clock Source Plus Divider Perfect Circuit
Specifications
- Brand: Tenderfoot Electronics
- Internal Clock Range: 1 BPM to 1.1kHz
- External Clock Range: Up to 2kHz
- Max Divisions: 8, 16, 32, 64
- Output Modes: Up counting, Down counting, Pulse output, Square wave output, Random Outputs
FAQs
- Q: How do I reset the clock?
- A: Hold down the encoder without rotating it for 2 seconds to stop and reset the clock.
- Q: How do I exit the random output mode?
- A: Select either the up or down counting modes to exit the random mode.
PRODUCT OVERVIEW
PRODUCT USING INSTRUCTION
- INTERNAL CLOCK
- Tap the encoder to set a tempo.
- Turn the encoder to increase (CW) or decrease (CCW) the clock speed.
- Independent of the max division, output 1 will always output at the tap tempo when running from the internal clock.
- EXTERNAL CLOCK
- Patching an external trigger into the IN jack will override the Internal clock functions.
- Range:
- Lowest: 1 beat per minute
- Highest: 1.1kHz (internal clock) 2kHz (externally clocked)
- Holding down the encoder without rotating it for 2 seconds will stop and reset the clock. A single tap from this status will restart the clock at the last set of BPM.
- Press in (hold) and rotate the encoder to select the max divisions of 8; 16; 32; 64
- The lower four LEDs will show you your current max division.
- Hold and rotate the encoder even further beyond the 64 max division to access the various other counting and trigger modes which in sequence are:
- 8; 16; 32; 64 (as above)
- Up counting (LEDs will strobe from bottom to top)
- Down counting (LEDs will strobe from top to bottom)
- Pulse output (5ms trigger) (every 2nd LED will strobe)
- Square wave output (50% duty cycle) (LEDs will strobe in fours)
- Random Outputs
- Up counting, down counting, and random modes are all mutually exclusive. Selecting one of these will turn off the other 2.
- Pulse and Square modes are mutually exclusive. Selecting one will disable the other.
- The probability of the Random output mode is affected by the clock divisions. For the lowest probability, select the random mode and then select the 64-max division.
- To exit the random mode, select either the up or down counting modes.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>