TASMOR LED Star Night Light Projector User Manual
- June 14, 2024
- Tasmor
Table of Contents
**TASMOR LED Star Night Light Projector User Manual
**
Unboxing Check
Thank you for purchasing our products, please read the instruction manual carefully before use. Instruction manual contains necessary safety advice and user instructions, follow the instruction manual to operate in order to avoid damaging the product for misuse. Check whether the product is damaged or not when you receive the product.
Package list
- Music starry projector x 1
- Remote controller x 1
- USB cable x 1
- User manual x1
Warnings:
The power requirement of this product is USB DC 5V. Once the range exceeded, please use the regulator device, otherwise it’ II affect its service life.
Notice:
- Strictly in accordance with the instructions of this operation, do not disassemble the host and accessories.
- This product is suitable for indoor use.
- The product is projected by LED and laser combinations, please do not use laser shone directly in eyes and keep away from children.
How to use
- Indoor use, projecting in the sky direction.
- How to use the light projector, as shown below.
- Connect Bluetooth “BTK10” of the smart phone to play music.
- Use correct method of the remote control to make sure the remote control is pointing at the infrared sensor.
Host button function description
- Automatic recognition USB data. Note that this projector can auto recognize and play music while inserting USB memory. USB should contain some songs
- Ocean wave 3 levels brightness adjustment
- When Power on, LED light and laser light keep on; short press this key control LED light switch, long press control laser light switch
- DC Input: 5V
- Short press play previous song; Long press reduce volume
- Short press play next song; Long press increase volume
- Short press control the music play/pause
- Short press achieve Bluetooth/USB mode switch when connect Bluetooth and USB at same time
- Power ON/OFF
Statement
This product has been comprehensive and rigorous tested at the factory, the user should strictly follow the warning and instructions. Improper use resulting in product damage is not covered by the Company’s warranty.
Remote control function description
Instruction:
When projector light connects power; LED blue light keeps on and in non-moved status, laser light enters gradation mode, it can default automatically switch off in hours.
-
Control LED ocean wave light ON/OFF
-
Control Laser light ON/OFF
Press “R”, red light ON; Press again, red light OFF (at basic of light on at first time) -
Press “G”, green light ON; Press again, green light OFF (at basic of light on at first time)
-
Press “B”, blue light ON; Press again, blue light OFF (at basic of light on at first time)
-
Press “W”, white light ON; Press again, white light OFF (at basic of light on at first time)
(Note: Four color RGBW buttons can be combined by two to form a double-color projection) -
Control device volume up
-
Control device volume down
-
Select playing previous song
-
Select playing next song
-
Voice control: Connect with Bluetooth or USB memory playing music, press “Micro” icon, ocean wave and star light will fast-changing following music sound
-
Control ocean wave moving speed up (Pause–Slow–Medium–Fast)
-
Control ocean wave moving speed down (Fast–Medium–Slow–Pause)
-
Timer Off: LED light and laser light flash 3 times as prompting for set timer off successfully.
-
Press “FADE 1”, ocean wave move circularly in R-G-B-W single color mode and laser light changed to gradation mode (the same feature as power On)
-
Press “FADE 2”, ocean wave move circularly in RB-RG-RW-BG-BW-GW double-color mode and laser light changed to gradation mode
-
1H Timer: Shut off automatically after device work for 1 hour. LED light and laser light flash once time as prompting for set 1H timer successfully.
-
Control LED ocean wave light brightness (In order of 70%-40%-40%-70%- 100%)
-
Press “LASER light” achieve either Laser light stay on or enter into gradation mode
-
2H Timer: Shut off automatically after device work for 2 hours. LED light and laser light flash 2 times as prompting for set 2H timer successfully.
-
Control Music Switch On/Off
Notice:
This product comes with 4 hours automatic shutdown function that is work for 4 hours and shut down automatically.
Specification
Maximum LED Power : 2 4W
Green Laser : < 1MW
Power Input: USB DC5V
Operating Temperature: 14°F 104°F (-10°C ~ 40°C)
Projection Coverage: 161-538 ft² (15~500)
Product Dimensions: 123 164 mm
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>