Johan Lewis Dexter Touch Table Lamp User Manual
- June 7, 2024
- JOHAN LEWIS
Table of Contents
Johan Lewis Dexter Touch Table Lamp User Manual
Thank you for purchasing these Dexter touch table lamps. Please read the instructions carefully before use to ensure safe and satisfactory operations of this product.
Please keep this instruction for future reference.
Warnings!
- The supply cable runs through the inside of this product. Take care not to place undue stress on the cable whilst unpacking to prevent the possibility of a poor connection.
- If you are in any doubt consult a person competent to give advice on the assembly of electrical equipment.
- If the external flexible cable of the lamp is damaged it shall be exclusively replaced by the manufacturer or his service agent or a similar qualified person in order to avoid a hazard.
- To prevent electrocution switch off at the mains supply before assembling or maintaining this fitting. Ensure the plug is not connected to any power supply and read instructions before assembly.
- Always be sure to use the correct type and wattage of bulbs as indicated on the fitting.
- Never exceed the wattage stated.
- When changing the bulb, always switch off at the mains and allow the old bulb to cool down before handling. Dispose of used bulbs carefully.
- Caution! The bulb and surrounding parts can become hot during use.
- For indoor use only.
Care instructions
We recommend cleaning with a soft dry cloth. Do not use abrasive materials as these will damage the finish.
Replace bulbs from John Lewis or established brand of the same type and compatibility.
Parts list
Assembly
Never install your appliance on a wet, freshly painted surface. Ensure to off at the mains supply before assembling or maintaining this fitting.
Step 1
Unpack the product and remove all packaging. Be careful not to scratch the surface of the product whilst removing the wrapping.
Remove the shade ring already attached to the lamp
holder section. Carefully place the shade glass followed by the spacer (widest
end first) over the lamp holder. Secure the assembly in place by refitting the
shade ring removed earlier. Take care not to over tighten as this may cause
damage to the fitting. Ensure all components are straight and aligned during
this assembly process.
Step 2
Fit the bulb, type and wattage as indicated on the fitting (bulb not supplied). The wattage indicated must not be exceeded.
Table lamp is now ready for use.
Recommended bulb
1 x 6-9 Watt ES energy efficient LED GLS
or
1 x 42 Watt ES eco halogen GLS
Bulb not included
Specification
Max power: 60W
Voltage: 220~240V, 50/60Hz
IP20
Weight 0.9Kg
Please retain these instructions for future reference.
This symbol indicates that this product should not be treated as normal house- hold waste and it should be recycled. John Lewis does not operate in store take back, but as members of the Distributer Take Back scheme have funded the development and upgrade of recycling facilities across the UK. Please take it to your nearest collection facility or for further details contact your local council or visit www.recycle-more.co.uk.
We have taken great care to ensure that this product reaches you in perfect condition. However, should any parts be damaged or missing please e-mail lightingparts@JLPspares.co.uk
Trouble shooting:
Why is the light not working when switched on?
Check your power supply is switched on
Turn off light and check that the bulb is inserted correctly
Check the bulb is still in working order.
John Lewis partnership
171 Victoria Street
London SW1E 5NN Johnlewis.com
Made in China
Issue 1 09/20
References
- John Lewis & Partners | Department Store | Home, Fashion, Tech & More
- Everything you need to know to Recycle More
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>