TASMOR GU10 Smart Bulb Light User Manual

TASMOR GU10 Smart Bulb Light

• Thanks for choosing our Smart Bulb.
• Our smart bulb is connected to the Internet through the 2.4GHz WiFi wireless network. No matter where you are, as long as there is a network, you can control the bulb’s ON or OFF state via smart phone App.
• After connecting Amazon Alexa or Google Assistant, we can use voice to control the smart bulb.
• This bulb also has timer function and countdown function. Please read the manual before usage.

Specification

• Input Voltage / Frequency (V /HZ): AC220-240Vac 50/60Hz
• Input Power : 5W
• Luminous: 500LM
• Colour Temperature: 2700K-6500K + RGBCW
• WiFi Standard: 2.4 GHz Wi-Fi
• System Compatibility : IOS 8.0 or above \ Android 4.3 or above
• Product Life (Hours): 2 0000H (working environment temp is 25 t: and rated input voltage)

Attention
Avoid contact with water, this product is not waterproof. If the product has drop of water or misty liquid on the surface, please turn off the equipment immediately and wipe all the liquid.

Operation

1. Download the APP.

2. You can scan the QR code to download APP

3. You can also search “Smart Life” in Apple Store or Google Play to install the App.

4. Register APP

5. Run the APP.

6. Login with your account & password.
   For the first time using, you have to register a new account. (You can register by phone number or email)

7. APP Configuration
   Please make sure the smart bulb and you mobile phone covered by same WiFi router. (2.4G Wi-Fi 802.11 b/n/g)

8. A. Smart Mode

9. Power on the Wi-Fi smart bulb then switch it OFF/ON 3 times by following these steps: OFF – ON – OFF -ON – OFF – ON, until lamp begins to flash quickly (about twice a second)

10. Open the APP and click “Add Device” or”+” to add device, select “Lighting” in the list of devices.

11. select “Lighting (wifi)”

12. Click the “Confirm indication rapidly Blink”, search WiFi router and type in password and click “Confirm”

Once the configuration is completed, the indication light will stop flickering.

Add Device – AP Mode ( Slow Flash Mode)

1. Click “+” on the top right of the main page to go to the next page and then select “Lighting”-“Lighting(Wi-Fi)”.
2. In AP mode, then enter your 2.4G wifi, and make sure the device’s white light is blinking slowly (2s/time), then go to connect the hotspot named “Smartlife-XXXX”and back to smart life APP.

Note:

• Please make sure there is only letters and numbers in your WiFi name and password, no special characters, like a dash.(-)
• If it doesn’t flash slowly, please turn on and turn off it for 3 times based on the fast flash mode, till the light flashes slowly in white . If it still doesn’t flash slowly, please try the steps above again.

APP Control

Power ON/OFF/ Timer/ Schedule / Colors I White Light/ DIY Scene /Music

Click “Edit” and you will see:

• Device name
• Shared devices
• Device information
• Device Location
• Create Group
• Remove Device

Connect Your Device to Alexa

• If you have activated the Smart Life skill in Alexa, you can directly say “alexa, discover device”
• Note: If you change the device name in Smart Life app, Alexa needs to rediscover the device.
• If you haven’t activated the Smart Life skill, you can directly sign in your Alexa account from Smart Life app to link in.
• Or you can sign in your Alexa app, then find the Smart Life app to activate.
• Now, you can control your smart devices through Echo:”Alexa, turn on/off smart bulb”

Connect Your Device to Google Home
If you already have a Google assistant account, you can directly sign in your account from Smart Life app to link in.

Note:

• Please make sure that the WiFi network address of your Alexa App is indentical with the WiFi network address of the Smart Life App.
• If you change the device’s name on Smart Life APP, Echo must re-discover it before you control them.
• You can set up groups on Alexa App to control.

Another APP connection

1. Download the Tuya Smart App from App Store or Google Play.

2. Login/Registration

3. After downloading the free Tuya Smart App, please create a new account by following these steps: Press

4. Select your country code, enter the mail address you want to use to login and press Enter the code you received by mail, set your personal password and press Now you can access the pages for the creation of your Smart Home.

5. Add New Device

6. To add your new device, open Tuya Smart App on page, press <+> in the upper right corner and then .

7. The Application offers two different procedures to add your new device: EZ and AP mode.

8. Please use the default EZ mode. If it fails, please try again or use AP mode.

9. Add New Device
   Make sure your new device is in EZ mode, otherwise reset it by switching on the device and, after 10 seconds, switching it off and then switching it on and off continuously untill it starts blinking quickly.
   After resetting the device:

10. Open mobile Bluetooth.

11. Click to add device.

12. Enter the password of the WiFi network you are connected to and press to connect your new device (The WiFi network supported is 2.4Ghz)

13. Press <is fast blinking (0.5s/time)>.

14. When connecting the device, you can select the room of your home where the device is located and press to access the control page of your new device.

15. Now your new device is ready to be controlled via the App, even remotely.

FAQ

1. Can I group multiple Tuya Smart’s devices together?

2. Yes, you can group multiple devices of the same type together, by room, location or however else you want. The same devices can be in multiple groups.

3. From your main devices list, press on one of the devices you want to group, press the menu button on the top right and click . You will then be able to choose which devices you would like to group together, confirm and name the new group and save.

4. Now, in the page of the devices’ list, you will also find the new group just created. Each command given to the group will be executed simultaneously by all the devices belonging to that group.

5. How many devices can I control?
   The App can control and unlimited amount of devices in an unlimited amount of locations. Your router may have a limit of how many devices can be connected to one router.

6. The device appears offline or unreachable, what should I do?

7. Make sure your WIFI router is online and in range.

8. Make sure you have the latest Tuya Smart functionality by pressing in your device settings.

If you still have questions, please feel free to contact us.
Tech support email: [email protected]

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>