Frossvt RMS-201CB Paper Shredder Owner’s Manual
- June 14, 2024
- Frossvt
Table of Contents
Frossvt RMS-201CB Paper Shredder
SAFETY INSTRUCTIONS
When using this machine follow these safety precautions to reduce the risk of fire, electric shock, or injury.
WARNING
- For your safety, this machine should be properly grounded on a level surface indoors only.
- The machine should be placed near the electrical outlet so that the outlet is easily accessible.
- Make sure the voltage meets the machine’s electricity requirements (115 – 120 volt / 60 Hz).
- Turn off the power or unplug the machine before maintenance, emptying the basket, or moving the unit.
- Do not handle the plug with wet hands.
- Do not immerse the machine in water or permit liquid to get inside the machine.
- Do not operate the machine near water, any flammables, or heat-sensitive materials.
- Do not block or put any materials on top of the machine.
- Do not have any personal articles hanging around the machine, such as long hair, necklace, or clothing.
- Do not place hands or fingers into the shredder opening as serious injury could result.
- Never allow children to shred or play with this shredder.
- Do not operate the machine for any other purpose other than its intended use.
- Warning Signs:
- Children are not allowed to operate.
- Do not put nails, ties, or zippers inside.
- Do not use aerosol dusters or cleaners.
- Do not place your hands or fingers into the shredder.
- Keep long hair away from the machine to avoid injury.
- Paper clips are not accepted.
- CDs are not accepted.
- Reference the Owner’s Manual.
When using this machine follow these safety precautions to reduce the risk of fire, electric shock, or injury.
CAUTION
- Do not attempt to shred materials other than paper or credit cards. Do not shred plastic (except credit cards), newsprint, cardboard, paperclips, labels, tape, envelopes, or anything with glue or adhesives.
- Do not shred greeting cards with sound chips or batteries.
- It is recommended that you remove all staples from the paper before shredding.
- This unit will cut staples up to a maximum of 12 stapled sheets.
- Continuous shredding of staples can get jammed in the cutting blades and affect the performance of the shredder.
- Do not exceed the recommended sheet capacity.
- Do not operate if the electrical plug or power cord is damaged.
- Do not under any circumstance alter the electric plug.
- The cord should be secured behind the machine and not left exposed or dangling.
- Do not pull on the cable to unplug.
- Do not turn this machine on/off by connecting/disconnecting it from the source of electricity.
- Turn off the power when unattended or not in use for an extended period of time.
- Avoid placing the machine near the following areas:
- a. An area with high humidity
- b. An area that is exposed to direct sunlight
- c. An area that is dusty or incurs vibrations
- d. An area that is not level or is on an incline
- e. A heat or fire-prone area such as a stove or near a dehumidifier
- Do not use aerosol dusters or cleaners. Do not use canned air on the shredder.
- If changing the feed direction (ex. Forward to Reverse), allow long enough time for the motor to stop to avoid possible damage.
- Empty the waste bin frequently to avoid overloading it and possibly damaging the shredder-cutting mechanism.
- Continuous shredding of paper should not exceed 10 minutes. If continuous use is required, it is recommended that the shredding time should be a maximum of 10 minutes followed by a minimum of 60 minutes cooling time to allow for proper cooling of the motor.
- Do not attempt to repair the shredder yourself.
PRODUCT VIEW
CONTROL PANEL
- Bin Full: This indicator light will inform the user when the bucket is full and needs to be emptied. If the light appears, the machine will stop running and will require the user to empty the bin before continuing to shred.
- Overheat: This indicator light will inform the user when the machine has overheated. If this light appears, wait for the shredder to cool down.
- Power: This indicator light will inform the user whether the machine is on or off.
- Reverse: This button will allow the user to manually reverse the papers that are feeding through the machine.
- This will help clear jams and ensure smooth operation.
- Forward: This button is used for auto-feeding paper through the auto-feed entry.
- ON/OFF: Press this button to turn the unit on and off.
- Master Power Switch : Ensure the master power switch is turned ON to operate the unit (located on the left side of the unit).
PRODUCT OPERATION
- Place the shredder on a flat, level surface.
- Plug the power cable into the wall power outlet.
- Turn the master control switch ON (located under the lip on the top side of the unit).
- Next press the “ON/OFF” button (located on top of the shredder).
- NOTE: The Power Indicator LED light will turn ON when the machine is ready to use.
- If the basket is pulled out or not inserted correctly, the LED Power Indicator light will not turn on.
- Insert up to 12 sheets of paper into the Manual Feed Entry.
- When the stack of paper is completely shredded, the motor will stop running.
NOTE: Working condition: – 10°C~50°C(14°F~122°F).
TROUBLESHOOTING
| Symptom | Solutions |
|---|---|
| The shredder does not turn on. | Ensure that the shredder is plugged in. |
Ensure that the “ON/OFF” master switch is on.
Ensure that the “ON/OFF” button is pushed down (ON setting). Ensure that the pull-out bin is properly inserted all the way.
Ensure that the red “BINFULL” Indicator light is not on.
Paper jam in the manual entry.| Manual Entry
If a paper jam is detected in the manual slot, the shredder will stop.
a) Press the “REVERSE” button and gently pull the jammed papers out.
b) Check to ensure the quantity of papers does not exceed the maximum capacity.
c) Once the jam is removed, press the “FORWARD” button to resume shredding.
The shredder suddenly stops while shredding.| Ensure that the shredder “OVERHEAT” Indicator light is not on. (Refer to the Overheat Section)
Ensure that the bin is not full. (Refer to the Bin Full Section)
The motor keeps running after shredding is complete.| Press the “ON/OFF” button to turn the shredder off. Press the “REVERSE” button.
NOTE: Do not attempt to repair the shredder yourself.
| MODEL | RMS-201CB |
|---|---|
| Shred Type | Cross-Cut |
| Entry Width | 8.86 in. (225 mm) |
| Speed | 5.9 ft. (1.8 m) per minute |
| Bin Capacity | 5.3 Gallons (20 L) |
| Duty Cycle | 10 Minute ON/ 60 Minute OFF |
| Security Rating | P-4 |
| Particle Size | 4 x 12 mm |
| Shreds | Paper, standard staples, credit cards |
| Credit Card/ Pass | 1 PC |
| Manual-Feed Capacity | 12 sheets (75 gsm maximum) |
| Dimensions | 14.37″ X 9.84″ X 17.95″ |
365 mm x 250 mm x 456 mm
Weight| 17.64 lbs. / 8 kgs
- Based on 20 lb (75g/m?) Letter-Sized 8.5 x 11″ (216mm x 278mm), 92 Bright paper at 21-23°C, (70-73°F) 60% Humidity
LIMITED WARRANTY
- Thank you for purchasing our shredder. We guarantee to provide customers with quality products and good Customer Service: frossvt@dg-sunrise.com
- Every Frossvt product comes with 1-Year Worry-free Warranty.
- Please read and retain these instructions.
- CustomerService:frossvt@dg-sunrise.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>