Frossvt EM3105 Small Espresso Machine User Manual

Frossvt EM3105 Small Espresso Machine

Product Information

Specifications

• Item: EM3105
• Voltage: 120V
• Frequency: 60 Hz
• Power: 1350 W
• Water tank capacity: 1.4 L
• Pump Pressure: 20 Bar
• Made in: China

Product Usage Instructions

Before the First Use

1. Remove the coffee maker from the package and check the accessories according to the list.
2. Clean all the detachable components.
3. Remove the red silicone from the water tank before using the coffee maker.
4. From position A to position B , rotate counterclockwise to install the filter holder. Do not add coffee powder into the funnel holder of the machine.
5. Touch the double-cup coffee switch and let the hot water out to wash the coffee filter and the cup.

How to Make a Good Cup of Coffee

1. Use the bean grinder to adjust the appropriate grinding thickness.
2. Pour fresh coffee beans into the grinding chamber and grind them.
3. Weigh the coffee powder to ensure the correct amount (single cup: 9-9.5g; double cup: 16-16.5g).
4. Compact the coffee powder with a powder press.
5. The distance between the surface of the pressed coffee powder and the edge of the filter cup should be about 3mm.
6. The amount of coffee liquid should be around 25-35g for a single cup and 40-60g for a double cup, which can be adjusted by the thickness of the ground coffee.

Accessories

1. Water tank cover
2. Water tank
3. Steam control knob
4. Main body
5. Steam pipe and nozzle
6. Base
7. ON/OFF switch
8. Warm cupboard
9. Single-cup coffee switch/indicator lamp
10. Double-cup coffee switch/indicator lamp
11. Steam preheating switch/indicator light
12. Pressure meter
13. Funnel holder
14. Buoy
15. Drip tray cover
16. Drip tray
17. Coffee spoon
18. Single-cup coffee filter
19. Double-cup coffee filter
20. Filter Holder
21. Coffee outlet

Operation Manual

Single Cup of Coffee Extraction

1. Touch the single cup of coffee switch to start extracting coffee.
2. The indicator lamp will flash while preheating.
3. The machine will automatically extract until it stops working or you touch the button again to stop the extraction process.
4. During the extraction process, the indicator lamp will become a constant light.

Double Cup of Coffee Extraction

1. Touch the double cup of coffee switch to start extracting coffee.
2. The indicator lamp will flash while preheating.
3. The machine will automatically extract until it stops working or you touch the button again to stop the extraction process.
4. During the extraction process, the indicator lamp will become a constant light.

Steam Making Mode

1. Touch the steam preheating switch to start preheating the steam.
2. The indicator lamp will flash during the preheating process.
3. After preheating, the indicator lamp will become a constant light and the machine enters the steam-making mode.
4. If you touch the steam preheating switch again during the whole process, the machine will switch back to the coffee extraction state from steam-making mode.

FAQ

• Can I use pre-ground coffee instead of grinding fresh beans?
  No, this coffee machine is designed to use fresh coffee beans. Using pre- ground coffee may affect the performance and taste of the coffee.

• How often should I clean the detachable components?
  We recommend cleaning the detachable components after each use to maintain optimal hygiene and performance.

• Can I use this machine to make other drinks like Cappuccino or Latte?
  No, this machine is specifically designed for making coffee. Using it for other purposes may cause danger.

Specification

Before the First Use

Before the First Use (Important)

1. Move the coffee maker from the package, and check the accessories according to the list.

2. Clean all the detachable components.

3. Remove the red silicone from the water tank before using the coffee maker.
   （Note: If the red silicone piece is not removed, the machine will be unable to pump water）

4. Pour water into the water tank and the water level should not exceed the “max” mark. Put back the water tank and close the water cover.

5. Plug in and press the ON/OFF switch“ ”. At this time, all indicator lamps are flashing. The machine starts to preheat, and when the indicator lights stop blinking and turn normal on, the preheat is completed, it takes about 1 minute.

6. After the preheating is completed, turn the steam knob counterclockwise to the maximum position, and the electromagnetic pump works until continuous hot water comes out from the steam pipe and at least 30 seconds (this process takes 1-2 minutes) to clean the steam pipe, then turn off the steam switch;

7. From position “ ” to position “ “, rotate counterclockwise to install the filter holder（No coffee powder added） into the funnel holder of the machine, then touch the double-cup coffee switch“ ” to let the hot water out to wash the coffee filter and the cup.

How to Make a Good Cup of Coffee

Grinding coffee bean and grinding quality largely determine the quality of coffee, if the powder is too coarse, the coffee extract is inadequate, the taste is light, and the color is lighter, the cream also will be very thin, and the color is white; if the powder is too fine, coffee over-extraction, it will be too dark, and no cream. A good cup of coffee should use freshly ground coffee beans (use a burr coffee grinder), and use the appropriate amount of coffee beans. Each time you make coffee with coffee powder, the freshness of the beans is very important, long-term time storage will make coffee bean oil decomposition.

1. Use the bean grinder to adjust the appropriate grinding thickness, and then pour the fresh coffee beans into the grinding chamber for grinding.Use the bean grinder to adjust the appropriate grinding thickness.
2. It is recommended to weigh each time you make coffee to ensure the amount of coffee powder added (single cup: 9-9.5g; double cup: 16-16.5g), and compact the coffee powder with a powder press;
3. Distance to the surface of pressed coffee powder should be about 3mm away from the edge of the filter cup (important indicator). Too high or too low will affect the extraction pressure and effect of coffee, please reduce or increase the amount of coffee powder;
4. Make coffee liquid: single cup of coffee: 25-35g; double cup of coffee :40-60g, this can be adjusted by the thickness of the ground coffee.

Accessories

1. Water tank cover
2. Water tank
3. Steam control knob
4. Main body
5. Steam pipe and nozzle
6. Base
7. ON/OFF switch
8. Warm cup board
9. Single-cup coffee switch/indicator lamp
10. Double-cup coffee switch/ indicator lamp
11. Steam preheating switch/indicator light
12. pressure meter
13. Funnel holder
14. Buoy
15. Drip tray cover
16. Drip tray
17. Coffee spoon
18. Single-cup coffee filter
19. Double-cup coffee filter
20. Filter Holder
21. Coffee outlet

Warning:
The machine must use a grinding Coffee powder and just make coffee, coffee drinks (ex: Cappuccino, Latte, and so on), heating milk, and other irregular use may cause danger.

Operation Manual

• “ ”: ON/OFF switch, Press the switch, the machine is powered on, the indicator lamp “ ”、“ ”and“ ” flashing on, the machine starts to preheat. when all indicator lamps stop blinking and turn normal on, the preheating is completed, and the machine enters the making coffee or hot water mode. Press the switch again during or after preheating, and the machine is powered off. ( If the indicator lamp“ ”keeps flashing fast when the machine is powered on, check the steam knob and rotate clockwise to put it off.)
• “ ”: Single cup of a coffee switch, Touch it to start extracting coffee after preheating, the indicator lamp “ ” breath flashes. Automatically extract until the machine stops working or touch the button again to stop working during the extraction process， the indicator lamp“ ”、“ ” and“ ” become constant light. (The automatic extraction time machine has been set and contains pre-brewed coffee time)
• “ ”: Double cup of coffee switch, touch it to start extracting coffee after preheating, the indicator lamp “ ” breath flashes. Automatically extract until the machine stops working or touch the button again to stop working during the extraction process, the indicator lamp “ ”、“ ” and“ ” become constant light. (The automatic extraction time the machine has been set and contains pre-brewed coffee time)
• “ “: steam preheating switch, touch the switch, the indicator lamp “ ” flashes, begin to preheat the steam. After the preheating, the indicator lamp ” ” becomes constant light and the machine enters the steam-making mode. (If you touch the steam preheating switch again during the whole process, the machine switches back to the coffee extraction state from steam preheating. If the indicator lamp“ ”、“ ”flashing, It indicates that the coffee temperature is too high, you need to cool it naturally or make hot water manually. Coffee cannot be extracted until the indicator lamp “ ”、 “ ”and“ ” become constant light.)
• The steam knob: The steam knob shown below is in the closed position. There are two working states when the steam knob is turned on. When the machine is in coffee mode, the steam pipe gives hot water. When the machine is in steam mode, the steam tube gives steam.

Note:
When the power is turned on, the steam preheating indicator keeps flashing fast, it means that the steam knob is not closed, and you can turn the steam knob to the closed position.

Make Espresso Coffee

Make Espresso Coffee（Double-Cup Coffee For Example）

1. Open the lid, take out the water tank, and pour the appropriate water into the tank. Do not exceed the MAX capacity;

2. Put back the water tank and close the lid;

3. Plug in and press the ON/OFF switch“ ” and All indicator lamps flash, the machine start preheating, preheating will be finished after 1min, and the coffee and steam indicator lamp will always light on ;

4. Take out the filter holder, pour the appropriate coffee powder(16-16.5 grams) into the coffee filter with a coffee spoon, then press the coffee powder tightly, and clean the extra coffee powder overflowing the edge of the holder, to avoid damage to the seal ring of the group head.
   Note:
   If too much coffee powder remains on the edge of the filter, will easily cause poor sealing and water leakage.

5. Rotate the high-pressure funnel assembly counterclockwise from position “ ” to position “ ” (must be tightened);

6. Put cup(s) under coffee outlet;

7. Touch the double-cup coffee switch“ ”, the machine starts pumping water, and coffee flows out of the coffee nozzle;

8. The coffee machine automatically stops working (the light from the Breathing light on to a constant light), and the coffee is made at this time, then remove the coffee cup;
   Warning: Do not leave the coffee machine unattended during the coffee- making process, as it sometimes requires manual operation.

9. After the coffee is made, take out the high-pressure funnel assembly by rotating it clockwise, clean the coffee grounds in the filter in time, and rinse it with hot water. Touch the single-cup or double-cup coffee button, flush the outlet with water, install the clean high-pressure funnel assembly on the outlet, and wait for the next use.

10. When making a single cup of coffee, use a single-cup coffee filter, touch the single-cup coffee switch when making, and the other steps are the same as double-cup coffee making.

Warning:
Do not touch the hot surfaces of the machine with hands to avoid scald, especially the brewing outlet, and steam nozzle when using the machine.

Make Cappuccino

1. Prepare espresso first with a large enough cup according to part “B;

2. Use whole, fresh cold milk out of the fridge(8℃-10℃), and pour 1/3 milk in a cup;
   Note: Use a stainless steel cup, and the cup diameter should not be less than 70 ± 5mm, due to the volume of milk will increase after frothing.

3. Touch the steam switch“ ”, and it starts preheating, Single-cup and double-cup coffee indicators go out, the steam indicator flashes, then wait for the steam indicator lights on, and now preheating is finished.

4. Put an empty cup under the steam pipe, turn the “steam knob” counterclockwise to the maximum position, release a little water in the steam pipe, and turn the “steam knob” clockwise to turn off the steam after the steam comes out.

5. Put a stainless steel cup under the steam nozzle, Let the steam pipe nozzle float below the surface of the milk;

6. Open the steam knob, and rotate it to the maximum position to frothing milk;

7. When desired milk foam is reached, then turn off the knob, steam is stopped, remove the cup, and pour the frothed milk into the prepared espresso, now the cappuccino is ready, you can add some sugar or Coco powder if you like it.

Note:
After the steam stops spraying, please clean the steam pipe assembly immediately and discharge the milk in the pipe to prevent the milk froth from scaling on the pipe wall. During the operation, due to the high surface temperature of the steam pipe, be sure not to be scalded.

Making Hot Water

1. Put a container under a hot water outlet;
2. When all indicator lamps always keep on, Open the steam knob, and rotate it to the maximum position, hot water will be come out from the hot water pipe immediately; In the process of making hot water, the single-cup coffee indicator“ ” Breathing light on;
3. When the hot water reaches the required amount, turn the “steam knob” clockwise to the off position, and the hot water stops flowing out.

Reminder:
The hot water function can also be used to quickly cool down the coffee machine.

Note:
When using, be careful of the hot parts of the machine. Especially the water outlet (funnel holder), hot water nozzle, and steam pipe. When operating, please do not put your hands on the above parts for any reason.

Heating Liquid (Steam Function)

1. Use a stainless steel cup, and pour cold liquid into 1/2 cup;
   Note: Cup diameter should not be less than 70 ± 5mm. Because it is heated by steam to avoid liquid overflows or spills when steam is released.

2. Touch the steam button“ ”, it starts preheating, the single and double cup coffee indicator lights go out, and then the steam indicator lamp flashes, preheating will be finished after the steam indicator lamp lights on.

3. Put a cup under the steam nozzle, and let the steam nozzle insert into the liquid.

4. Turn on the steam knob, and release the steam.

5. Turn off the steam knob when the desired temperature is reached, now steam is stopped.

Note:
Clean steam nozzle immediately after use, to prevent milk scaling. Caution high temperature of hot water outlet when in use.

Indicator Tips

Single-cup Coffee Indicator| Double-cup Coffee Indicator| Steam Indicator| Cause| Solution
---|---|---|---|---
Flashing| Flashing| Lights off| Coffee and hot water is pre-heating| /
Lights on| Lights on| Lights off| Coffee and hot water pre-heating finished| /
Breathing light on| Lights off| Lights off| Making single cups of coffee or water| /
Lights off| Breathing light on| Lights off| Making double-cup coffee| /
Lights

off

| Lights

off

| Flashing| Steam is pre-heating| /
Lights off| Lights off| Lights on| Steam pre-heating finished| /
Lights off| Lights off| Breathin

g light on

| ****

Making steam

| ****

/

Lights off| Lights off| Lights on| Steam finished| /

Flashing quickly

| ****

Flashing quickly

| ****

Flashing quickly

| Temperature sensor short circuit or open circuit| Please contact with authorized

service facility for repairing.

Flashing quickly| Flashing quickly| Lights off| After making the steam, touch the steam switch (the temperature is too high)| Wait temperature to naturally fall or open the steam button to make hot water    quick cooling
Lights off| Lights off| Lights off| Turn off| /
Thermal fuse open circuit| Please contact with authorized service facility for repair.
Lights off| Lights off| Flashing quickly| Standby for more than 30 minutes| Touch display switch
---|---|---|---|---

TroulbeShooting

the voltage and frequency are consistent with the nameplate
Machine malfunctions| Please contact the authorized service
No steam is generated| Steam nozzle clogged| Clean steam nozzle
The water tank is empty| Pour water into the water tank
Machine malfunctions| Please contact the authorized service
Coffee runs out around the edge of the filter holder| Too much powder in the filter| Turn off the machine and wait for it to cool down, clean the filter, then pour the appropriate coffee powder
There is powder in the seal ring under the group head
Implementation of the above operation problems still exist| Please contact the authorized service
Coffee comes out too slow or no coffee comes out| coffee powder is too fine, and the clogged filter| With thicker coffee powder
Filter holes are blocked| Brush / clean the filter
The water tank is not inserted| Insert the water tank in place
Water leakage on the bottom of the machine| The drip tray is filled up| Please clean the drip tray
Machine malfunctions| Please contact the authorized service
Machine is| The power cord is not| Plug the power cord into a wall
not working| plugged well.| outlet correctly,
---|---|---
NTC is a short-circuit| Please contact the authorized service
Machine malfunctions
The steam cannot froth.| Steam indicator not light on| Wait for the steam indicator light on.
The container is too big or the shape does not fit| Use a high and narrow cup or garland cup
Used skimmed milk| Use whole milk

If you have not been able to solve the problem, contact customer support: at frossvt@dg-sunrise.com.

Content of hazardous substances in the product

Accessory| Hazardous Substances
(Pb)| (Hg)| (Cd)| (Cr(VI))| (PBBs)| (PBDEs)
Plastic| ○| ○| ○| ○| ○| ○
Hardware| ○| ○| ○| ○| ○| ○
Power

Cord

| ×| ○| ○| ○| ○| ○
Electrical device| ×| ○| ○| ○| ○| ○
Silicone

parts

| ○| ○| ○| ○| ○| ○
Package| ○| ○| ○| ○| ○| ○
This form is compiled in accordance with the provisions of SJ/T 11364.

: Indicates that the content of the hazardous substance in all homogeneous materials of the part is within the limit requirement of GB/T 26572.

: It means that the content of the hazardous substance in at least one of the homogeneous materials of the part exceeds the limit requirement of GB/T26572.

Clean and Maintenance

1. The machine has to be switched off and cooled down;

2. Use a clean damp cloth to clean the stainless steel surface;
   Note: Do not use abrasive sponges and alcohol or solvents.

3. Clean the outlet and the seal sing under the group head with a professional brush;

4. Clean the steam outlet, and confirm there is no blockage

5. Detach the metal funnel by turning it anticlockwise, get rid of the coffee residue inside, then you can clean it with cleanser, but at last, you must rinse it with clear water.

6. Clean all the attachments in the water and dry them thoroughly.

7. Clean the drip tray and removable shelf regularly then dry them.

8. Clean the water tank regularly.

Cleaning Mineral Deposits

1. The machine builds up limescale deposits over time, and you need to descale the machine for 2-3 months;
2. Pour water and descale in the water tank up to MAX capacity (water and descale ratio is 4:1, follow the instructions for descale. Please use “household descale”, or you can use the citric acid replace descale (water and the citric acid ratio is 100:3);
3. Lock the filter holder (no coffee powder) into the group head. According to part “B” MAKE ESPRESSO COFFEE;
4. Touch the coffee button, make about 150ml coffee(or Make 3 cups of coffee) .then touch the Steam warm-up switch, and it starts preheating, open the steam knob after the steam indicator always lights on, release the steam for about 2min and turn off the knob, then make descales deposit in the machine at least 15min;
5. Repeat the steps 4 for 3 times;
6. Touch the double coffee button to brew coffee and repeat the steps until there is no descale left;
7. Make coffee again(no coffee powder), repeat steps 4 3 times (no need to wait for 15 min), then repeat brewing until no water is left in the boiler;
8. Repeat the step 7 at least 3 times to make sure the piping is clean.

Environment-friendly disposal

You can help protect the environment!
Please remember to respect the local regulations: hand in the non-working electric equipment to an appropriate waste disposal center.

These appliances are built to the very highest standards.

There are no user-serviceable parts. Follow these steps if the unit fails to operate:

1. Check the instructions have been followed correctly.
2. Check that the mains supply is functional.
3. If the appliance will still not operate, please contact us:

Customer Service: frossvt@dg-sunrise.com.

Manufacturer:
FROSSVT Brands Inc

Customer Service: frossvt@dg-sunrise.com.

References

• sunrise.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>