HAOZEE NW-HT Wi-Fi Temperature and Humidity Sensor User Manual
- June 13, 2024
- HAOZEE
Table of Contents
Wi-Fi Temperature & Humidity Sensor
USER MANUAL
Model: NW-HT
How to pair it with Tuyasmart or Smart Life
Thanks for choosing our product !
You can real-time monitor the temperature and humidity on the screen directly.
Please kindly read the user manual carefully before usage and keep it for
future reference.
Product diagram
1. Display screen | 6. Install the hanging plate |
---|---|
2. Brightness detector | 7. Set key |
3. Speaker | 8.Battery powered switch |
4.LED lights | 9.USB Power supply interface |
5.Temperature and humidity detector | 10.External temperature sensor interface |
Screen display introduction
Specification
- Battery: 3.7V /500mAh
- Charging time:≤2 Hours
- Duration of one charge:≤4-6 Hours
- Wi-Fi Protocol: 2.4GHz(does not support 5G)
- Wi-Fi Standard: IEEE 802. l 1 b/g/n
- Temperature Measure Range: -19-60℃/28.5-42.8℉
- Temperature Accuracy: ±0.3℃/±0.54℉
- Humidity Measure Range: 0~100% RH
- Humidity Accuracy:±3% RH
- Light Intensity Detect Range: 0~100%
Check list before using the device:
a. Your smartphone has connected to a 2.4GHz Wi-Fi network
b. You have input the correct Wi-Fi password.
c. Your smartphone must be Android 4.4 + or iOS 8.0 +.
d. Your Wi-Fi router is MAC-open
e. If the numbers of devices connected to Wi-Fi router reach the limit, you
can try to disable a device to cavate the channel or try with another Wi-Fi
router.
How to set up:
- Use your smartphone to scan QR code, or search “Smart Life” app in Google Play Store or APP Store to download and install. https://smartapp.tuya.com/smartlife
- Create an account with your mobile number and authentication code.
- Connect your mobile to your Wi-Fi router ,supply power to the sensor with the supplied Microcharging cable, click “+” in the upper right corner of homepage or click “ Add Device ” . Note :Before paired,need to push the button behind of the device as below photo shown for 10seconds.Then LCD display will flash quickly,then it will be in pairing mode.3. 1) Turn on the bluetooth in mobile:The app will advise you to turn on bluetooth in your mobile, then you choose the device to add. Enter into your Wi-Fi name and Wi-Fi password, it will connect the Wi-Fi network automatically.2) Do not turn on the bluetooth:
Note:Before paired,need to push the button behind of the device as below photo shown for 10seconds.Then LCD display will flash quickly,then it will be in pairing mode. Select ”Temperature and Humidity Sensor(Wi-Fi)” from “Sensors”, enter into the Wi-Fi password,make sure LED indicator is blinking rapidly, if not,please open the stand at the back, hold the reset button for about 5s till LED indicator blink rapidly.
it will connect.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>