MAVERICK TS-1 Android System HD Convenient Integrated Projector User Manual
- June 14, 2024
- Maverick
Table of Contents
TS-1 Android System HD Convenient Integrated Projector
User Manual
Opening Remarks
Thank you very much for your support!
You can learn to use and operate on this projector by reading this manual.
This projector has powerful features like compact, convenient etc. It is
specifically designed for home, entertainment, business and other occasions.
The projector let you enjoy the fun of the big screen reality anytime and
anywhere, and you are also welcome to share your fun and opinions with us.
If you have any questions about this product, please contact our after-sales
department. We are happy to service for you.
For best effects, it is recommended that you use this product in a dark room.
Cautions and warning
- Do not install the machine where directly blown by the air conditioner, the water condensed or high temperature may cause machine failure.
- Make sure that there is sufficient ventilation and the ventilation is not blocked, so as to avoid the accumulation of hot air in the machine
- Prevent clips or paper falling into the machine, and do not put any metal objects into machine. If accidentally happens, please turn off the power immediately and let qualified personnel fix it.
- Due to avoid the risk of leakage, do not place any liquid on the machine.
- When transporting the projector, please use soft packaging materials to protect the lens from scratches please install the lens protection cover, nonviolent during transporting.
- During or after the projection, the vicinity of the exhaust vent will become hot, non-touch with your hands.
- Do not look into the lens while the machine is powered on, it may cause serious damage to your eyes.
NOTICE
Do not open the case. Please entrust qualified professional maintenance
personnel to perform maintenance.
This mark warns there is an uninsulated voltage in the unit, which may cause
electric shock due to the surface magnetic field. It is extremely dangerous to
touch any parts inside the machine.
NOTICE
To prevent fire or electric shock, do not expose this machine to rain or
moisture.
INTELLIGENT PROJECTOR MADE IN CHINA
LIST OF ITEMS
Thank you very much for purchasing our products.
Please check whether the physical products received are complete; If the
products and accessories you receive are not complete, please contact the
sales personnel in a timely manner. (For specific items, please refer to the
actual package.) Please use the original power adapter.
Using a non original adapter may cause faults such as short circuit of the
host computer, lens burning, and so on!
THE REMOTE CONTROL
Remote Control Description
- Power: To turn on/off the unit
- Mute: To mute or unmute the projector speaker
- Menu: To open the menu of applications or files
- Volume +/-:Increase/Decrease the volume
- Enter： Choose/Click
- Directional Keys: Use the up or down buttons to select OSD items, use the left and right button to make adjustments.
- Return：Back to previous menu or close the active window
- Home:Back to homepage
- Singnal source switching：Switching signals or opening removable disks
- Before focal length: Adjust the lens focus forward
- After focal length: Adjust the lens focus backward
- Tool: Open product settings function
PRODUCT DETAILS
*Do not place objects within 20cm of the heat
dissipation hole
INSTALLATION AND DEBUGGING
Focus: When the projection image is blurry (as shown in the right figure),
adjust the focus adjustment button on the remote control to move forward or
backward to achieve satisfactory imaging results.
If satisfactory clarity cannot be achieved through adjustment, please move the
machine back and forth appropriately.
INSTALLATION AND DEBUGGING
Projection Distance Reference
| Projection Size ( Inch) | Projection Distance (M) |
|---|---|
| 33″ | 1.5M |
| 52″ | 1.7M |
| 62″ | 2.0M |
| 80″ | 2.5M |
| 88″ | 2.8 M |
| 105″ | 3.4 M |
| 120″ | 3.8 M |
- Press the ON/OFF button on the remote control or the power switch on the unit.
- Put the lens cap on and store the uniting dry and cool place.
INSTALL THE EQUIPMENT
THE SOFTWARE SETTINGS
Home Page
Projection Setting
Notes: With the update of system version,
there will be differences from the actual interfaces. Please refer to the
displayed interfaces as final.
Wi-Fi Setting
Select a hotspot and enter a password to connect
Bluetooth Settings
Open Bluetooth and select pairing successfully
MEDIA PLAYER
You can play videos, music, or pictures from a storage device in the following ways.
- After the projector is turned on, insert a USB flash drive, and the system will detect the external device by itself, and a pop-up prompt will pop up. Select the type of file you want to play, and press the “OK” button on the remote control panel to enter.
Due to frequent software updates, the interface may vary. Please focus on the actual interface. ‘ - Press the signal input button on the remote control and select USB device to turn it on.
SAME SCREEN
Connect the projector and phone to the same network, then open the HAPPY
Cast application and follow the prompts.
CLEAN AND MAINTAIN
Before cleaning, you must make sure that you have unplugged the power plug.
Do not use insecticides or other volatile chemicals on the projector or lens.
Do not use rubber or vinyl products to touch the projector. This can damage or
cause coating peel off.
-
Clean the Projector
Wipe with a soft dry cotton cloth. use a soft cloth dipped in a diluted neutral detergent to wipe it, then with a dry cloth. If you use chemical fiber cloth, please follow the precautions
Do not use thinner, benzene or other solvents to avoid quality degradation or peeling of the spray coating. When cleaning the dirt, you can insert a brush in the front of the vacuum cleaner, avoid directly use the vacuum cleaner without any connectors or the nozzle, avoid scratches. -
Dust cleaning of lens
Use the same method to clean the camera lens, use the professional hair dryer for the camera or the cleaning paper for the glass’s lens. Be careful not to scratch the lens. -
Dust cleaning at suction and outlet
The dust in the air inlet and outlet prevents ventilation, which will increase the internal temperature and cause malfunctions. Cleaning guidelines: at least clean once use every 10,000 hours.
Turn off the projector, disconnect the power. Clean the exterior with an electric vacuum cleaner and install a brush head adapter on the vacuum cleaner. Please be careful not to use a vacuum cleaner without an adapter or brush head.
Product Warranty Description
The after-sale service of projector is strictly based on the “Consumer
Rights Protection Law of the People’s Republic of China” and “Product Quality
Law of the People’s Republic of China”, service content detailed as below.
Within 12 months upon purchasing, faults that not caused by improper use of
human factors shall be inspected by after-sale service center, 3 free
maintenance service shall be provided for you with valid purchase proof if
it’s determined as defect that caused by product quality itself.
Non-Warranty Regulations:
- Accessories such as Remote Controller, User manual, Power cord are not warranted.
- Damage caused by self-disassembly or unauthorized maintenance, modification etc.
- Damage that caused by artificial damage. 4. Period of warranty validity has expired.
After-Sale Service Card
Customer Name:……..
Customer ID:………..
Customer Tel:……………
Customer Email:…………….
Fault Description
(Please describe in detail for quick maintenance):
FCC Statement
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To assure continued compliance, any changes or modifications not expressly
approved by the party.
Responsible for compliance could void the user’s authority to operate this
equipment. (Example- use only shielded interface cables when connecting to
computer or peripheral devices).
This equipment complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
FCC Radiation Exposure Statement:
The equipment complies with FCC Radiation exposure limits set forth for
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator and your body.
INTELLIGENT PROJECTOR
Documents / Resources
|
MAVERICK TS-1 Android System HD Convenient Integrated
Projector
[pdf] User Manual
TS-1 Android System HD Convenient Integrated Projector, TS-1, Android System
HD Convenient Integrated Projector, Convenient Integrated Projector,
Integrated Projector, Projector
---|---